561152

Miele WKB130 Handleiding

10
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
Operating instructions
for washing machines
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 555 920
Caring for the environment
2
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposing of your old
appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain specific materials,
compounds and components, which
were essential for their correct function
and safety. These could be hazardous
to human health and to the environment
if disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local
community waste collection / recycling
centre for electrical and electronic
appliances, or contact your dealer or
Miele for advice. You are also
responsible (by law, depending on
country) for deleting any personal data
that may be stored on the appliance
being disposed of. Please ensure that
your old appliance poses no risk to
children while being stored prior to
disposal.
Contents
3
Caring for the environment .................................................................................. 2
Warning and Safety instructions ......................................................................... 6
Operating the washing machine ........................................................................ 13
Control panel......................................................................................................... 13
Examples on how to operate the machine............................................................ 15
Before using for the first time ............................................................................ 16
Setting the language ............................................................................................. 16
Removing the transit bars ..................................................................................... 16
Starting the calibration programme....................................................................... 17
Washing environmentally and economically .................................................... 18
1. Prepare the laundry......................................................................................... 19
2. Select a programme........................................................................................ 20
3. Load the washing machine............................................................................. 21
4. Select programme settings ............................................................................ 22
5. Add detergent .................................................................................................. 24
Detergent dispenser drawer .................................................................................. 24
CapDosing............................................................................................................. 25
6. Start the programme - the end of a programme .......................................... 27
Spinning................................................................................................................ 28
Delay start ............................................................................................................ 30
To select delay start .............................................................................................. 30
To change delay start ............................................................................................ 30
To cancel delay start and begin the programme straight away ............................ 30
Programme chart ................................................................................................ 31
Options ................................................................................................................. 34
Short...................................................................................................................... 34
Water plus ............................................................................................................. 34
The following options can be selected in addition to the programme: ................. 35
Programme sequence......................................................................................... 36
Garment care label symbols............................................................................... 38
Contents
4
Changing the programme sequence ................................................................ 39
Cancelling a programme ....................................................................................... 39
Interrupting a programme...................................................................................... 39
Changing a programme......................................................................................... 39
Adding or removing laundry after the programme has started ............................. 40
Safety lock............................................................................................................. 41
Detergent ............................................................................................................. 42
The correct detergent............................................................................................ 42
Water softeners ..................................................................................................... 42
Dispensing aids ..................................................................................................... 42
Fabric conditioner and liquid starch...................................................................... 42
Miele recommended detergents ........................................................................... 43
Recommended detergents in accordance with Directive (EU) Nr. 1015/2010...... 44
Cleaning and care ............................................................................................... 46
Cleaning the drum (Hygiene info) .......................................................................... 46
External casing and fascia panel........................................................................... 46
Cleaning the detergent dispenser drawer ............................................................. 46
Cleaning the water inlet filters ............................................................................... 48
Problem solving guide ........................................................................................ 49
The programme does not start.............................................................................. 49
The following fault messages appear in the display and the programme stops... 50
A message appears in the display at the end of the programme ......................... 51
General problems with the washing machine ....................................................... 52
An unsatisfactory wash result ............................................................................... 54
The door will not open........................................................................................... 55
Opening the door in the event of a blocked drain outlet and/or power failure ..... 56
After sales service............................................................................................... 58
Repairs .................................................................................................................. 58
Guarantee: U.K...................................................................................................... 58
Guarantee: Other countries ................................................................................... 58
Optional accessories............................................................................................. 58
Installation and connection ................................................................................ 59
Front view .............................................................................................................. 59
Rear view............................................................................................................... 60
Installation surface ................................................................................................ 61
Transporting the washing machine to its installation site...................................... 61
Removing the transit bars ..................................................................................... 61
Re-fitting the transit bars....................................................................................... 63
Contents
5
Levelling the machine............................................................................................ 64
Screwing out and adjusting the feet................................................................. 64
Building under a continuous worktop/ in a kitchen run.................................... 65
Washer-dryer stack ..........................................................................................65
The water protection system................................................................................. 66
Connection to the water supply ............................................................................ 67
Connection to the drainage system ...................................................................... 68
Electrical connection U.K. ..................................................................................... 69
Consumption data............................................................................................... 70
Note for test institutes ........................................................................................... 70
Technical data...................................................................................................... 71
Settings ................................................................................................................ 72
Language ........................................................................................................... 73
Degree of soiling.................................................................................................... 73
Buzzer volume....................................................................................................... 73
Keypad tone .......................................................................................................... 73
Code...................................................................................................................... 74
Temperature unit.................................................................................................... 74
Display brightness................................................................................................. 74
Dark display........................................................................................................... 74
Machine switch-off................................................................................................ 75
Display maximum load .......................................................................................... 75
Display programme name ..................................................................................... 75
Memory ................................................................................................................. 76
Pre-wash Cottons.................................................................................................. 76
Gentle action ......................................................................................................... 76
Reduce temp......................................................................................................... 76
Water plus ............................................................................................................. 77
Water plus level ..................................................................................................... 77
Maximum rinse level.............................................................................................. 77
Suds cooling.......................................................................................................... 77
Low water pressure ............................................................................................... 78
Anti-crease ............................................................................................................ 78
Optional accessories .......................................................................................... 79
Detergent............................................................................................................... 79
Specialist detergents............................................................................................. 79
Fabric care............................................................................................................. 80
Additives................................................................................................................ 80
Warning and Safety instructions
6
This washing machine complies with current safety requirements.
Inappropriate use can, however, lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the machine, please
read these instructions carefully before using it for the first time.
They contain important information on its safety, use and
maintenance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future user.
Correct application
This washing machine is intended for use in domestic households
and similar working and residential environments.
The washing machine is not intended for outdoor use.
It must be used only as a domestic appliance to wash items which
are specified by the manufacturer as being washable on the wash
care label. Miele cannot be held liable for damage resulting from
incorrect or improper use or operation.
The washing machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it safely and recognise and understand the
consequences of incorrect operation.
Warning and Safety instructions
7
Safety with children
Children under 8 years of age must be kept away from the
washing machine unless they are constantly supervised.
Children 8 years and older may only use the washing machine
unsupervised if they have been shown how to use it safely and
recognise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the washing
machine unsupervised.
Please supervise children in the vicinity of the washing machine
and do not let them play with it.
Technical safety
Please observe the instructions in "Installation and connection"
and "Technical data".
Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged machine.
Before connecting the washing machine, ensure that the
connection data on the data plate (fuse rating, voltage and
frequency) match the mains electricity supply. If in any doubt,
consult a qualified electrician.
Reliable and safe operation of this washing machine can only be
assured if it has been connected to the mains electricity supply.
Warning and Safety instructions
8
The electrical safety of this washing machine can only be
guaranteed when correctly earthed.
It is essential that this standard safety requirement is met. If in any
doubt, please have the wiring system of the building tested by a
qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the washing machine to the mains electricity
supply by a multi-socket adapter, extension lead or similar. These do
not guarantee the required safety of the machine (fire hazard due to
the risk of overheating).
Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can Miele
guarantee the safety standards of the machine.
The electrical socket must be easily accessible after installation so
that the machine can be disconnected from the electricity supply if
necessary.
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the
guarantee.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
Warning and Safety instructions
9
The machine must be isolated from the electricity supply when
cleaning and maintaining the machine and in the event of a fault.
The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
The water flow pressure must be at least 100kPa and should not
exceed 1000kPa.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.
The machine must not be used in a non-stationary location (e.g.
on a ship).
Do not make any alterations to the machine, unless authorised to
do so by Miele.
Warning and Safety instructions
10
Correct use
Do not install the washing machine in a room where there is a risk
of frost. Frozen hoses may burst or split. The reliability of the
electronic control unit may be impaired at temperatures below
freezing point.
Before using the machine for the first time, check that the transit
bars at the rear of the machine have been removed (see "Installation
and connection - Removing the transit bars"). During spinning, a
transit bar which is still in place may result in damage to both the
machine and adjacent furniture or appliances.
Turn off the stopcock if the machine is to be left for any length of
time (e.g. holiday), especially if there is no floor drain (gully) in the
immediate vicinity.
Flooding danger.
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
Take care to ensure that foreign objects (e.g. nails, pins, coins,
paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds
container, drum), which in turn can result in damage to the laundry.
Warning and Safety instructions
11
Take care when opening the drum door after using the steam
function. Danger of burning due to escaping steam and the high
temperature of the surface of the drum as well as the porthole glass.
Stand back away from the machine and wait until the steam has
dissipated.
The maximum load for this washing machine is 8 kg (dry weight).
See the "Programme chart" for the maximum recommended loads
for individual programmes.
If the correct amount of detergent is dispensed, the machine
should not need to be descaled. If, however, you do wish to descale
it, only use a proprietary natural citric acid based descaling agent.
Miele recommends using Miele descaling agent which is available to
order online at www.miele-shop.com or from Miele. Strictly observe
the instructions on the packaging.
Textiles which have been pre-treated in solvent based cleaning
agents must be thoroughly rinsed in clean water before being
washed in the machine.
Do not use solvent based cleaning agents, e.g. those containing
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and
explosion hazard.
Do not use solvent based cleaning agents, e.g. those containing
benzine, to clean the surfaces of the machine. They can cause
damage to plastic surfaces.
Only use dyes specified by the manufacturer as being suitable for
use in a domestic washing machine. Always observe the
manufacturer's instructions carefully.
Warning and Safety instructions
12
Colour run and dye removers contain sulphur compounds which
can cause damage such as corrosion. Do not use these products in
this machine.
If detergent comes into contact with the eyes, rinse them
thoroughly with lukewarm water immediately. If swallowed, seek
medical assistance immediately and retain the packaging or label for
reference. Those with skin problems or sensitive skin should avoid
their skin coming into contact with detergent.
Accessories
Accessory parts may only be fitted when expressly approved by
Miele. If other parts are used, guarantee, performance and product
liability claims will be invalidated.
A Miele tumble dryer can be stacked on top of a Miele washing
machine using the appropriate stacking kit (available as an optional
accessory). Please make sure you order the correct one for the Miele
washing machine and Miele tumble dryer.
If installing the machine on a Miele plinth, (available as an optional
accessory, depending on country), please make sure you order the
correct one for this washing machine.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety instructions.
Operating the washing machine
13
Control panel
a
Display with sensors
See the next page for more
information.
b
Start/Stop button
For starting the programme selected
and cancelling a programme once it
has started.
c
Temperature button
For selecting the temperature.
d
Spin speed button
For selecting the spin speed.
e
Delay start button
For selecting delay start.
f
Option buttons
Various options can be added to the
wash programme.
g
Programme selector
For selecting the wash programme.
h
Optical interface PC
For service technicians.
i
button
For switching the washing machine
on and off.
To save energy the washing machine
will switch off automatically 15
minutes after the end of the
programme/anti-crease phase or
after being switched on if no other
selection is made.
Operating the washing machine
14
j
sensor
Scrolls down the list to the next
option or decreases a value.
k
OK sensor
Confirms the programme selected, a
value set or opens a sub-menu.
l
sensor
Scrolls up the list to the next option
or increases a value.
m
Cap sensor
Activates cap dosing via the
detergent dispenser drawer.
Sensors to light up when the
display can be operated via the
sensors.
Standard display
The standard display shows the
following from left to right:
2:59 1600
– the programme duration
– the selected wash temperature
– the selected spin speed
Programme duration
After the programme has started the
programme duration will appear in the
display in hours and minutes.
If delay start has been selected, the
programme duration will appear at the
end of the delay start time.
Delay start
The delay start time selected will
appear in the display.
After the programme has started the
delay start time will begin to count
down.
Once the delay start time has elapsed,
the estimated programme duration will
appear in the display.
Operating the washing machine
15
Examples on how to operate
the machine
Scrolling through a list
The arrows in the display indicate that
a list is available.
Language 
Touching the sensor scrolls down the
list to the next option and touching the
sensor scrolls up the list to the next
option. The OK sensor is used to
activate the option which is currently in
the display.
Identifying options selected
Cap
If an option has been activated, this will
be indicated by a tick next to it.
Setting numerical values
Start in h00 :00
A numerical value is highlighted in
white. Touching the sensor
decreases the value and touching the
sensor increases it. The OK sensor is
used to activate the value which is
currently in the display.
Exiting a sub-menu
Select Back  to exit a sub-menu.
Before using for the first time
16
Before using the machine for the
first time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filters are
securely tightened to prevent the risk
of water leaks during use.
Removing the protective foil
and stickers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not remove any labels
(e.g. the data plate), visible when you
open the door.
This washing machine has undergone
a complete functional test at the
factory and there will be some residual
water in the drum from this process.
Switch on the washing
machine
Press the button.
The welcome screen will light up.
Setting the language
You will be asked to select the language
you want for the display. It is possible
to change the language at any time via
"Settings".
deutsch
Touch the or sensor until the
language you want appears in the
display.
Confirm your selection of the
language by touching the OK sensor.
Removing the transit bars
A reminder to remove the transit bars
will appear in the display.
Failure to remove the transit bars
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in "Installation and connection".
Confirm the removal of the transit
bars with the OKsensor.
Before using for the first time
17
Starting the calibration
programme
The following message appears in the
display:
Open  and run Cottons 90°C without
laundry
Touch the sensor repeatedly until
you have read all the rows of text.
The OK sensor will light up.
Confirm the message with the
OKsensor.
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this the Cottons 90°C must be
started without laundry and without
detergent.
No other programmes can be started
until calibration has been carried out.
Open the stopcock.
Turn the programme selector to
Cottons.
1:55 90°C 1600
Press the Start/Stop button.
The calibration programme has started.
This will take approx. 2hours.
At the end of the programme the
following message will be displayed:
Set up complete
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the button.
Washing environmentally and economically
18
Energy and water consumption
– Water consumption and energy
usage are determined by the size of
the load.
To make the most of your machine,
load the maximum dry load for the
programme you are using.
– When smaller amounts of laundry are
washed, the automatic load
recognition system will reduce the
amount of water and energy used.
– Use the Express20 programme for
small, lightly soiled loads.
– Modern detergents make it possible
to wash at lower temperatures (e.g.
20°C). Washing using lower
temperature settings will save energy.
– To maintain the hygiene of the
machine, carry out a hot wash (60°C
or above) using powder detergent at
regular intervals. Hygiene info will
appear in the display to remind you
to carry out a hot wash.
Detergent
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent with
smaller loads (approx. ⅓ less than
the amount recommended can be
used when washing a half load).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
1. Prepare the laundry
19
Empty all pockets.
Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and to components in
the machine.
Check the laundry before washing
and remove any foreign objects.
Sort the laundry
Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Tip: Dark textiles often contain excess
dye and should be washed separately
several times before being included in a
mixed load. Always wash whites and
coloureds separately.
Pre-treat stains
Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft, colourfast cloth. Do not rub.
Tip: Badly soiled areas can be pre-
treated with liquid detergent, stain
removers etc. first, following the
manufacturer's instructions. With
particularly stubborn stains ask your dry
cleaner for advice.
Solvent-based cleaners (e.g.
benzine) can damage plastic parts.
When pre-treating garments, make
sure that any plastic parts (e.g.
buttons) are protected from cleaning
agent.
Chemical (solvent-based)
cleaning agents can cause severe
damage to the washing machine.
Do not use solvent-based cleaning
agents in this machine.
General tips
– Curtains: Remove lead weights first
or place in a laundry bag.
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Close any zips, attach velcro
fasteners, fasten hooks and eyes etc.
before washing.
– Fasten duvet covers, pillow cases
etc. to prevent small items from being
rolled up inside them.
Do not wash any items in this washing
machine which are specified by the
manufacturer as not washable on the
care label ( symbol).
2. Select a programme
20
Switch on the washing
machine
Press the button.
Programme selection
Turn the programme selector to the
required programme.
The load for the programme selected
will appear in the display. This will then
be replaced by the standard display.
3. Load the washing machine
21
Open the door
Reach under the door grip and pull
the door open.
Check the drum for pets or foreign
objects before loading it with
laundry.
Unfold the laundry and load loosely
into the drum.
Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.
Please note the maximum load for the
different wash programmes. The
relevant programme load is always
shown in the display when you select a
programme.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creases.
Close the door
Make sure that no items are caught
between the door and the seal.
Shut the door with a gentle swing.
4. Select programme settings
22
Degree of soiling
Lightly soiled
No visible dirt or stains. Possibly slight
body odour.
Normally soiled
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Soiling and/or stains clearly visible.
Tip: You can switch on the degree of
soiling query and select the default
setting for the degree of soiling (see
"Settings - Degree of soiling").
If the degree of soiling query has been
switched on, the following will appear in
the display:
Degree of soiling
The display will change automatically to
the degree of soiling query:
Normal   
Set the degree of soiling with the
and sensors and confirm your
selection with the OK sensor.
The following parameters will change
depending on the degree of soiling
selected:
– with the Heavy degree of soiling
setting, a pre-wash will be carried out
automatically for some programmes
(see "Options").
– the rinse water level will be adjusted
– the programme durations (with light
soiling the programme duration will
be shorter)
In the Express 20 programme the
degree of soiling cannot be selected.
Express 20 is designed for lightly
soiled laundry.
Select a temperature
You can alter the pre-set temperature
of a wash programme.
Press the Temperature button.
The following will appear in the display:
Temperature
Set the temperature you want with
the and sensors and confirm
your selection with the OK sensor.
4. Select programme settings
23
Selecting a spin speed
You can alter the pre-set spin speed of
a wash programme.
Press the Spin speed button.
The following will appear in the display:
Spin speed rpm1600
Set the spin speed you want with the
and sensors and confirm your
selection with the OK sensor.
Select options
Press the button for the option you
want.
The indicator light in the button will
come on.
Not all options are suitable for use
with every programme. You can only
select options which are compatible
with the programme being used.
See "Options".
Switch on delay start (if
required)
The start of a programme can be
delayed from 15 minutes up to 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
See "Delay start".
5. Add detergent
24
There are several options for adding
detergent.
Detergent dispenser drawer
Too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater
elements.
Too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
Pull out the detergent dispenser
drawer and add detergent to the
compartments as follows:
Detergent for the pre-wash (divide the
total recommended amount as follows:
add ⅓ to compartment and ⅔ to
compartment )
Detergent for the main wash
/
Fabric conditioner, liquid starch or
capsules.
See "Detergent" for further information.
5. Add detergent
25
CapDosing
Three different types of capsule are
available:
= Fabric care (e.g. fabric
conditioner, proofing agent)
= Additives (e.g. detergent
enhancers)
= Detergent (for the main wash
only)
Each capsule contains the correct
amount for one wash cycle.
You can order the capsules online at
www.miele-shop.com or from Miele
(see the end of this booklet for contact
details).
Keep capsules out of the reach
of children.
Activating CapDosing
Touch the Cap sensor.
The first type of capsule which can be
selected for the programme will appear
in the display.
Cap
Select the type of capsule you want
with the and sensors and
confirm your selection with the OK
sensor.
Inserting a capsule
Open the detergent dispenser drawer.
Open the lid of the /
compartment.
Press the capsule in firmly.
5. Add detergent
26
Close the lid and press it firmly shut.
Close the detergent dispenser
drawer.
The capsule is opened by the act of
inserting it in the detergent dispenser
drawer. The contents can run out of
the capsule if you then remove it
from the drawer before it is used.
In this case, dispose of the capsule
and do not re-use it.
The wash programme will dispense the
contents of the capsule at the correct
time.
Water intake to the compartment
is solely via the capsule.
No additional fabric conditioner may
be added to the compartment
when using a capsule.
Remove the empty capsule at the
end of the programme.
For technical reasons a small amount
of water will remain in the capsule.
Deactivating/changing
CapDosing
Touch the Cap sensor and follow
the instructions in the display.
6. Start the programme - the end of a programme
27
Start the programme
Touch the flashing Start/Stop sensor.
The door will lock (the will appear in
the display to show this) and the
programme will start.
If a delay start time has been selected,
then this will count down in the display.
At the end of the delay start time or
immediately after the programme has
started (if no delay start time has been
selected), the programme duration will
appear in the display.
The programme sequence is also
shown in the display. The washing
machine lets you know which section of
the programme has been reached.
At the end of a programme
The door is still locked during the anti-
crease phase and the following will
appear alternately in the display:
Anti-crease/Finish
and
Press Start/Stop
Press the Start/Stop button. This will
unlock the door.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Check that all items have been
removed from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the button.
If applicable, remove the used
capsule from the detergent
dispensing drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
Spinning
28
Final spin speed
Programme rpm
Cottons 1600
Minimum iron 1200
Woollens 1200*
Separate rinse / Starch 1600*
Delicates 900
Express 20 1200
Dark garments / Denim 1200
Shirts 900
Drain / Spin 1600
Final spin speed in the
programme
When a programme is selected the
optimum spin speed for that
programme will appear in the display.
For programmes marked with a * in the
chart, the optimum spin speed is not
the maximum spin speed.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons programme, an additional rinse
is introduced.
Spinning
29
To omit the final spin (Rinse
hold)
Use the Spin speed button to select
the setting (Rinse hold). The
laundry is not spun after the final
rinse and remains in the final rinse
water. This helps prevent creasing if
the laundry is not going to be
removed from the drum immediately
after the end of the programme.
– To start the final spin:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Use the Spin speed button to select
the 0 rpm setting (Without spin) and
press the Start/Stop button.
The water will drain away.
To omit rinse and interim spin
and the final spin
Press the Spin speed button.
Select the 0 rpm setting.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Delay start
30
With delay start you can choose when
you want the programme to start. You
can delay the start of the programme
from 15 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
To select delay start
Press the Delay start button.
The following will appear in the display:
Start in h00 :00
Use the and sensors to enter the
hour and confirm your entry with the
OK sensor.
The display will change:
Start in h05: 00
Use the and sensors to enter the
minutes and confirm your entry with
the OK sensor.
Tip: The values will count upwards and
downwards automatically if you touch
the or sensor continuously.
To begin delay start
Press the Start/Stop button to begin
delay start and the wash programme.
The following will appear in the display:
Start in h05: 00
When the delay start time has elapsed,
the programme will begin and the
display will show the programme
duration and the programme sequence.
To change delay start
You can change delay start at any time.
Press the Delay start button.
Change the time
Touch the OK sensor.
Start in h05 :29
Now enter the time you want.
To cancel delay start and begin
the programme straight away
Press the Delay start button.
Change the time
Touch the sensor.
Start now
Touch the OK sensor. The wash
programme will start immediately.
Programme chart
31
Cottons cold to 90°C Max. load 8.0 kg
Use for Cotton, linen or cotton mix fabric, e.g. table linen, towelling,
underwear, T-shirts etc.
Note The settings 60°/40°C differ from / as follows:
– Shorter programme durations
– Longer temperature holding times
– Higher energy consumption
Where particularly high levels of hygiene are required please select a
temperature of 60°C or higher.
Cottons / Max. load 8.0 kg
Use for Normally soiled cotton garments.
Notes – These settings are the most efficient in terms of energy and water
consumption for washing cottons.
– With the actual wash temperature reached will be lower than
60°C although the wash performance is the same as with the
standard Cottons 60°C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label to Directive
1061/2010.
Minimum iron cold to 60°C Max. load 4.0 kg
Use for Synthetic, mixed fibre and easy care cotton.
Note Reduce the spin speed for fabric which creases easily.
Programme chart
32
Woollens cold to 40°C Max. load 2.0 kg
Use for Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.
Note Reduce the spin speed for items which crease easily.
Separate rinse / Starch Max. load 8.0 kg
Use for – Rinsing handwashed items.
– Starching table cloths, serviettes and workwear.
Notes – Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric
conditioner.
– Items will be rinsed very effectively using two rinse cycles by
activating the Water plus option.
Delicates cold to 60°C Max. load 3.0 kg
Use for Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
Curtains, including net curtains, specified as machine-washable by
the manufacturer.
Notes – Dust in curtains usually makes a programme with pre-wash
advisable. Select the Heavy setting for the degree of soiling so that
a pre-wash will be carried out.
– Deselect the spin for items which crease easily.
Programme chart
33
Express 20 cold to 40°C Max. load 3.5 kg
Use for Cotton garments that have hardly been worn or are only very lightly
soiled.
Note The Short option is activated automatically.
Dark garments / Denim cold to 60°C Max. load 3.0 kg
Use for Black and dark items made of cotton, mixed fibre or denim.
Notes – Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
Shirts cold to 60°C Max. load 2.0 kg
Use for Shirts and blouses made of cotton and mixed fibre.
Notes – Pre-treat soiled cuffs and collars if necessary.
– Wash silk shirts and blouses in the Silks programme.
Drain / Spin Max. load 8.0 kg
Notes – Drain only: Select 0 rpm for the spin speed.
– Make sure you select the appropriate spin speed.
Options
34
Options are selected and deselected via
the relevant buttons and the display.
Press the button for the option you
want.
The relevant button will light up.
Not all options are suitable for use with
every programme.
You can only select options which are
compatible with the programme being
used.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will give a better
result. Please note the load information
in the display. Small loads give a better
result.
The garments must be suitable for
drying in a tumble dryer   and
suitable for ironing  .
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Water plus
The water level in the wash and rinse
stages is increased and a second rinse
is carried out in the "Separate rinse /
Starch" programme.
You can select other functions for the
Water plus button. These are described
in "Settings".
Options
35
The following options can be selected in addition to the
programme:
None of the options can be selected with programmes which are not listed in the
chart below.
Pre-wash
1)
Pre-ironing Short Water plus
Cottons X X X X
Minimum iron X X X X
Separate rinse /
Starch
– – – X
Delicates X X X X
Express 20 – X
X
2)
–
Dark garments /
Denim
X X X X
Shirts X
X
2)
X X
X = Can be selected
– = Cannot be selected
1)
= Activated automatically when the Heavy degree of soiling setting is
selected
2)
= Can be deselected
Programme sequence
36
Main wash Rinses Spinning
Water
level
Wash
rhythm
Water
level
Rinses
Cottons
2-5
1)2)3)
Minimum iron
2-4
2)3)
Woollens 2
Separate rinse / Starch
0-1
5)
Delicates
2-4
2)3)
Express 20 1
Dark garments / Denim
3-5
2)3)
Shirts
3-4
3)
Drain / Spin – – – –
Please see the next page for a description of the symbols.
Programme sequence
37
= Low water level
= Medium water level
= High water level
= Intensive rhythm
= Normal rhythm
= Sensitive rhythm
= Ultra sensitive rhythm
= Handwash rhythm
= Carried out
– = Not carried out
The washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
The washing machine programme
sequence display shows which stage of
the programme has been reached.
Special features in the
programme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens and Silks
programmes.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60°C or higher is
selected, or with and
temperatures, 2 rinses are carried out.
If a temperature of less than 60°C is
selected, 3 rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
3)
An additional rinse is carried out if:
– the Water plus option is selected and
the Extra rinse or Water + and Extra
rinse setting has been activated for
the Water plus option in Settings.
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment .
5)
An additional rinse is carried out if:
the Water plus option is selected.
Garment care label symbols
38
Washing
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
No bar under the symbol:
= normal agitation
One bar under the symbol:
= reduced agitation
Two bars under the symbol:
= much reduced agitation
Hand wash (if no temperature is
specified, use the lowest
temperature or cold)
Do not wash
Programme selection examples
Programme Garment care label
symbols
Cottons 
Minimum iron 
Delicates 
Woollens
Express 20 
Drying
The number of dots indicates the
drying temperature
Normal temperature
Low temperature
Do not tumble dry
Ironing
The number of dots indicates the
ironing temperature
Hot iron (max. sole plate temp.
approx. 200°C)
Medium hot iron (max. sole
plate temp. approx. 150°C)
Cool iron (max. sole plate temp.
approx. 110°C).
Do not steam iron garments
carrying this symbol as this
could cause irreversible
damage.
Do not iron
Professional cleaning
Dry clean only. The letters
indicate the type of cleaning
agent required.
Professional Wet Clean only
Do not dry clean
Bleaching
Any oxidising bleaching agent
can be used
Only use an oxygen based
bleach or a non-chlorine bleach
Do not bleach
Changing the programme sequence
39
Cancelling a programme
You can cancel a programme at any
time after it has started:
Press the Start/Stop button.
The following will appear in the display:
Cancel programme
Touch the OK sensor.
The suds will be pumped away. The
following will appear in the display:
Prog. cancelled
Pull open the door.
Remove the laundry.
If you want to select a different
programme
Close the door.
Select the programme you want.
Add detergent to the detergent
dispenser drawer, if necessary.
Press the Start/Stop button.
The new programme will begin.
Interrupting a programme
Switch the washing machine off with
the button.
Switch the washing machine back on
with the button to continue with
the same programme.
Changing a programme
After the start of a programme it is no
longer possible to select a different
programme.
Temperature
With the exception of the Cottons
programme, it is possible to select a
different temperature up to 5 minutes
after the programme has started.
Press the Temperature button.
Use the , and OK sensors to
change the temperature.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
Press the Spin speed button.
Use the , and OK sensors to
change the spin speed.
Options
It is possible to select or deselect the
Short and Water plus options up to 5
minutes after the programme has
started.
Tip: It is not possible to make any
changes to the programme or to cancel
it if the safety lock has been activated.
Changing the programme sequence
40
Adding or removing laundry
after the programme has
started
Press the Start/Stop button.
The following will appear in the display:
Cancel programme
Scroll up the list with the or
sensor to:
Add laundry
Touch the OK sensor.
If this message does not appear in the
display then it is no longer possible to
add or remove items of laundry.
The programme will stop and the door
will unlock.
Pull open the door.
Add or remove items.
Close the door.
Press the Start/Stop button.
The programme will continue.
Please note:
Once a programme has started the
washing machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the Spin
stage.
If you want to open the door when the
above conditions are present you will
need to cancel the programme.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate
until the temperature has dropped to
below 55°C.
Changing the programme sequence
41
Safety lock
The safety lock prevents the
temperature, spin speed or options
being altered during a wash
programme.
To activate the safety lock
Press the Start/Stop button.
The following will appear in the display:
Cancel programme
Scroll up the list with the or
sensor to:
Activate lock
Touch the OK sensor.
To deactivate the safety lock
Proceed as for activating the safety
lock.
The following will appear in the display:
Deactivate lock
Touch the OK sensor.
The safety lock is now deactivated.
Detergent
42
The correct detergent
All detergents produced for automatic
washing machines are suitable. Follow
the manufacturer's instructions and
dosage recommendations on the
packaging.
For users in Asia:
please use a low foaming detergent
suitable for use in front-loading
machines
The right amount to dispense
will depend on the following:
– the soiling level of the load
– the quantity of the laundry
– the water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
Water softeners
A water softener can be used to cut
down on the use of detergents in areas
with water hardness levels II and III.
Dispense according to the amount
specified on the packaging. First add
detergent and then the water softener.
You can then use the recommended
amount of detergent for water hardness
level I.
Water hardness levels
Hardness
scale
Hardness level
in mmol/l
German scale
°d
I (soft) 0 – 1.5 0 – 8.4
II (medium) 1.5 – 2.5 8.4 – 14
III (hard) above 2.5 above 14
Dispensing aids
Use dispensing aids, (e.g. balls) if these
are supplied with the detergent,
particularly when using liquid detergent.
Refill packs of detergent
When purchasing detergent buy refill
packs wherever possible. This helps
reduce the amount of waste packaging.
Fabric conditioner and liquid
starch
Fabric conditioner
makes garments soft to handle and
helps prevent static cling when tumble
drying.
Starch
stiffens and gives body to items of
laundry, e.g. shirts, tablecloths and bed
linen.
Detergent
43
Miele recommended detergents
Miele detergents and care products have been specially designed for Miele
washing machines. They are available to order via the internet at www.miele-
shop.com or from Miele.
Miele
UltraWhite
Miele
UltraColor
Miele
Cap
Miele
Cap
Miele
Cap
Cottons –
Minimum iron – –
Woollens – – ,  – –
Separate rinse /
Starch
–/– –/– –/– /– –/–
Delicates – , ,  –
Express 20 – – –
Dark garments /
Denim
– – –
Shirts –
Recommended Sport SilkCare
– Not recommended Down Fabric conditioner
Outdoor Reproofing
WoolCare Booster
Detergent
44
Recommended detergents in accordance with Directive
(EU) Nr. 1015/2010
The recommendations apply to the temperature ranges given in the Programme
chart.
Universal Coloureds Delicates and
woollens
Specialist
detergent
Cottons – –
Minimum iron – – –
Woollens – –
Delicates – – –
Express 20 –
1)
– –
Dark garments / Denim –
1)
–
Shirts – –
Recommended
1)
Liquid detergent
– Not recommended
2)
Powder detergent
Detergent
45
Dispensing fabric conditioner
and liquid starch at the end of
the programme
Add the fabric conditioner or liquid
starch to the compartment or
insert the appropriate capsule. Do
not exceed the maximum level
mark.
The agent will be automatically
dispensed in the last rinse. At the end
of the programme a small amount of
water will remain in the
compartment.
Starch can make the siphon tube
sticky.
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.
Adding fabric conditioner or liquid
starch separately
Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.
Tip: When adding fabric conditioner
separately, activate the Water plus
option.
Add fabric conditioner to the
compartment or insert the
appropriate capsule.
Add liquid starch to the
compartment and powder or viscous
starch to the compartment.
Select the Separate rinse / Starch
programme.
Change the spin speed if necessary.
Activate the Cap sensor if using a
capsule.
Press the Start/Stop button.
Colour run and dye removers/dyes
Do not use colour run or dye
removers in this washing machine.
They can cause corrosion in the
machine.
Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt used
in the dyeing process can cause
corrosion to stainless steel components
in the machine if you dye frequently.
Always observe the manufacturer's
instructions carefully.
Cleaning and care
46
Cleaning the drum
(Hygiene info)
Washing at low temperatures and/or
using liquid detergent can cause
bacteria and unpleasant odours to build
up in the washing machine. Use the
Cottons75°C programme to clean the
machine. Run this programme regularly
or at the latest when Hygiene info
appears the display.
External casing and fascia
panel
Disconnect the machine from the
mains electricity supply before
cleaning or maintenance.
The washing machine must not
be hosed down.
Clean the casing and fascia panel
with a mild non-abrasive cleaning
agent or soap and water using a well
wrung-out cloth. Wipe dry with a soft
cloth.
The drum can be cleaned with a
proprietary stainless steel cleaning
agent, following the manufacturer's
instructions on the packaging.
Do not use solvents, abrasive
cleaners, glass cleaners or multi-
purpose cleaning agents. These
could damage plastic surfaces and
other parts.
Cleaning the detergent
dispenser drawer
Washing at low temperatures and the
use of liquid detergent can lead to a
build-up of mould and bacteria in the
detergent dispenser drawer.
For hygiene reasons, clean the entire
drawer at regular intervals.
Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release button and at the
same time pull the drawer right out of
the machine.
Clean the drawer with hot water.
Cleaning and care
47
Cleaning the siphon tube and the
channel
Liquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon
tube particularly thoroughly after
using liquid starch a few times.
Clean the siphon.
1. Remove the siphon from the
compartment and rinse under hot
running water. Clean the siphon tube
at the same time.
2. Replace the siphon.
Clean the fabric conditioner channel
with a brush and hot water.
Cleaning the detergent dispenser
drawer housing
Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer housing.
Replace the detergent dispenser
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
Cleaning and care
48
Cleaning the water inlet filters
The washing machine has two filters to
protect the water inlet valve. These
filters should be checked every six
months or so, or more often if there are
frequent interruptions to the water
supply.
To clean the filter in the union in the
open end of the inlet hose:
First turn off the stopcock.
Unscrew the inlet hose from the
stopcock.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
Clean the filter.
Replace the filter and seal back in the
reverse order and reconnect the
hose.
To clean the filter in the water inlet
valve:
Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew.
Use pointed nose pliers to withdraw
the plastic filter by the bar (see
illustration).
Clean the filter.
Replace the filter in the reverse order.
After cleaning the filters, turn on the
stopcock and check the connection
is watertight. If water drips out,
tighten the connection.
The two filters must be put back in
place after cleaning.
Problem solving guide
49
Minor faults in the performance of the washing machine, some of which may result
from incorrect operation, can be put right without contacting the Service
Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Some of the messages in the display are more than one line long. Touch the or
sensor to read them in full.
The programme does not start
Problem Cause and remedy
The display remains
dark, and the Start/Stop
button indicator light
does not come on.
There is no power to the machine.
Check whether the mains plug is plugged in and
switched on.
Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
Switch it back on with the button.
The display prompts
you to enter a code.
Access via a code has been activated.
Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to
appear in the display the next time the machine is
switched on.
The following appears
in the display:
 Service Door lock
The door is not closed properly. The door lock could
not engage.
Close the door again.
Start the programme again.
If the fault message appears again, contact the
Service Department.
Problem solving guide
50
The following fault messages appear in the display and the
programme stops
Problem Cause and remedy
Water intake See
The water inlet is blocked or restricted.
Check whether the stopcock is opened properly.
Check whether the inlet hose is kinked.
Check whether the water pressure is too low.
The filter in the water inlet is blocked.
Clean the filter.
Drainage See 
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filters and the drain pumps.
The maximum delivery head is 1 m.
 Service
Waterproof syst.
The water protection system has reacted.
Close the stopcock.
Call the Service Department.
 Service Fault F
There is a fault.
Start the programme again.
If the fault message appears again, contact the
Service Department.
To switch off the fault messages: Switch the washing machine off with the
button.
Problem solving guide
51
A message appears in the display at the end of the programme
Message Cause and remedy
Align the machine
The smoothing process which the laundry undergoes
at the end of the programme could not be carried out
properly.
Check whether the washing machine is aligned
correctly as described in "Installation and
connection - Levelling the machine".
Check whether the maximum delivery height of
1m has been exceeded.
If the fault message appears again, contact the
Service Department. The washing machine can still
be used but with reduced functionality.
Check dosage
Excessive foam has built up during washing.
Use less detergent next time, and follow the
manufacturer's recommended dosage amounts on
the packaging.
Hygiene info
A programme using a temperature above 60°C has
not been run for a long time.
In order to prevent bacteria and unpleasant odours
building up in the machine, run the Cottons 75°C
programme using Miele machine cleaner or
powder detergent.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
Problem solving guide
52
General problems with the washing machine
Problem Cause and remedy
The machine shakes
during the spin cycle.
The machine feet are not level.
Level the machine and adjust the feet correctly.
The laundry has not
been spun properly and
is still wet.
The machine detected an imbalance during the final
spin cycle and reduced the spin speed automatically.
Include both large and small items in the load as
this will give better distribution during spinning.
Strange pump noises
can be heard.
This is not a fault.
These slurping noises occur at the end of the pump
sequence as a normal part of operation.
Large amounts of
detergent residue
remain in the detergent
dispenser drawer.
The water pressure is too low.
Clean the water inlet filter.
It may be useful to select the Water plus option.
Powder detergent used in conjunction with water
softeners tends to become sticky.
In future, add washing powder into the dispenser
drawer first, and then add the water softener.
Fabric conditioner is not
completely dispensed
or too much water
remains in the
compartment.
The siphon tube is not correctly positioned or is
clogged.
Clean the siphon, see "Cleaning and care -
Cleaning the detergent dispenser drawer".
Problem solving guide
53
General problems with the washing machine
Problem Cause and remedy
At the end of the
programme there is still
liquid in the capsule.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
This is not a fault.
For technical reasons a small amount of water will
remain in the capsule.
There is water next to
the capsule in the fabric
conditioner
compartment.
The Cap sensor was not activated or an empty
capsule was not removed at the end of the last
programme.
Make sure that you remember to activate the Cap
sensor the next time you insert a capsule.
Remove and then dispose of the empty capsule at
the end of each programme.
The small pipe in the detergent dispenser drawer onto
which the capsule is placed is blocked.
Clean the small pipe.
The display is in a
different language.
A different language has been selected in "Settings,
Language ".
Set the language you want. The flag symbol will
guide you.
The display is dark. The display has switched off automatically to save
energy (Standby mode).
Press a button. Standby comes to an end.
Problem solving guide
54
An unsatisfactory wash result
Problem Cause and remedy
Liquid detergent does
not give the required
result.
Liquid detergents usually contain no bleaching
agents. They do not remove fruit, coffee and tea
stains.
Use a general purpose powder detergent
containing a bleaching agent.
Use the appropriate capsule or add stain removers
to the compartment.
Never put stain removers and liquid detergent
together in the dispenser drawer.
Grey, greasy particles
cling to washed laundry.
Insufficient amounts of detergent were used to break
down the particles of grease in heavily soiled laundry.
Use more detergent.
Before washing the next load, run the Maintenance
wash using Miele machine cleaner or a powder
detergent.
White residues which
look like powder
detergent are seen on
dark textiles after
washing.
The detergent contained compounds (zeolites) to aid
water softening which are not soluble in water. These
have ended up on the laundry.
Try and brush off the residues with a soft brush
once the laundry is dry.
Wash dark textiles using a detergent which
contains no zeolites. Liquid detergents usually
contain no zeolites.
Use the Dark garments / Denim programme for
dark coloured laundry.
Problem solving guide
55
The door will not open
Problem Cause and remedy
The door cannot be
pulled open during a
programme.
The drum is locked during a programme.
Press the Start/Stop button.
Use the sensor to select Cancel programme or
Add laundry.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the machine is
unable to drain.
Clean the drain filter and the drain pump as
described in "Opening the door in the event of a
blocked drain outlet and/or power failure".
The water level in the drum is too high.
Cancel the programme. The water will be pumped
away.
Comfort cooling
appears in the display
after a programme has
been cancelled.
For safety reasons the drum door cannot be opened if
the suds temperature is higher than 55°C.
Wait until the temperature in the drum has
decreased and the message has gone out in the
display.
The following appears
in the display:
 Service Door release
The door lock has jammed.
Call the Service Department.
Problem solving guide
56
Opening the door in the event
of a blocked drain outlet and/
or power failure
Switch off the washing machine.
Open the drain pump access panel.
Blocked drain outlet
If the drain outlet is blocked, a large
quantity of water can remain in the
washing machine.
If laundry has been washed at a
high temperature, water draining out
of the machine will still be hot.
Danger of scalding!
Take care when draining the
machine.
Procedure for draining the washing
machine
When draining water from the
machine, do not unscrew the drain
filter completely or take it right out.
Place a suitable container, e.g. a
Miele universal oven tray under the
access panel.
Slowly and carefully unscrew the filter
to let the water out. Be careful not to
release too much water at once. If the
flow of water is too strong, some
water can seep into the washing
machine base and activate the water
protection float switch. This will
prevent the washing machine from
functioning.
Tighten the drain filter back up again
if you need to interrupt the flow of
water.
Once the flow of water ceases:
Problem solving guide
57
Remove the drain filter completely.
Clean it thoroughly.
Remove any foreign objects (e.g.
buttons, coins, etc.) and fluff from the
filter housing. Turn the impeller by
hand to check that it rotates freely.
Replace the drain filter correctly and
tighten it securely.
Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
Opening the door
Always make sure that the drum
is stationary before reaching in to
remove laundry. Reaching into a
moving drum is extremely
dangerous.
Use a screwdriver to unlock the door.
Pull open the door.
After sales service
58
Repairs
In the event of any faults which you
cannot remedy yourself, please contact:
– your Miele Dealer, or
– Miele (Contact details for Miele are
given at the end of this booklet).
When contacting your Dealer or Miele,
please quote the model and serial
number of your machine, both of which
are shown on the data plate visible
above the porthole glass when the door
is open.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as
described in these instructions.
Guarantee: U.K.
In the U.K, the washing machine is
guaranteed for 2 years from the date of
purchase.
In the U.K. you must activate your cover
by calling 0330 160 6640 or registering
online at www.miele.co.uk.
Guarantee: Other countries
For information on the appliance
guarantee specific to your country
please contact Miele. See end of this
booklet for contact details.
Optional accessories
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
www.miele-shop.com.
Please note that telephone calls may
be monitored and recorded for training
purposes.
Installation and connection
59
Front view
a
Inlet hose (tested to withstand
pressure of at least 7,000 kPa)
b
Electrical supply cable
c
Flexible drain hose (with detachable
swivel elbow)
d
Control panel
e
Detergent dispenser drawer
f
Door
g
Access to drain filter, drain pump and
emergency release
h
Four height adjustable feet
Installation and connection
60
Rear view
a
Drain hose
b
Transport clips for electrical supply
cable, inlet and drain hoses
c
Electrical supply cable
d
Protruding lid for holding when
moving the machine
e
Inlet hose (tested to withstand
pressure of at least 7,000 kPa)
f
Safety caps for transit bars
g
Transport clips for inlet and drain
hoses and for storing transit bars
when not in use
Installation and connection
61
Installation surface
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
Please note:
The machine must be level and
securely positioned.
To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
We recommend a plywood base at
least 59 x 52 x 3 cm). The base
should span several joists and be
bolted to the joist and not only the
floorboards. Check for the presence
of pipes and cables first.
Tip: If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
There is the danger of the
washing machine moving about
during spinning and falling off a
plinth.
For this reason, if the machine is
installed on a raised plinth (concrete
or brick), it has to be secured against
slippage using an MTS floor/plinth
mounting kit (available from Miele).
Transporting the washing
machine to its installation site
To manoeuvre the washing machine out
of its packing case to its installation
site, hold it by the front feet as well as
by the edge of the lid where it protrudes
to the rear of the machine.
Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
Removing the transit bars
To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catches at the top and bottom.
Installation and connection
62
Using the spanner supplied, turn the
left-hand transit bar 90°, then
pull the transit bar out.
Turn the right-hand transit bar 90°,
then
pull the transit bar out.
Installation and connection
63
To avoid the risk of injury, the
holes for the transit bars must be
covered after the transit bars have
been removed.
Plug the holes with the plastic caps
as illustrated.
Secure the transit bars to the back of
the washing machine. Make sure the
top catch is located above the holder.
The washing machine must not
be moved without the transit bars in
place. Store them as shown or keep
them in a safe place for future use.
They must be re-fitted if the machine
is to be moved again (e.g. when
moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
Installation and connection
64
Levelling the machine
The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
Using the spanner supplied turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
Use a spirit level to check that the
washing machine is standing level.
Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it sits
firmly up against the housing.
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.
Installation and connection
65
Building under a continuous
worktop/ in a kitchen run
The washing machine lid cannot
be removed.
This washing machine (with lid intact)
can be pushed under a worktop if there
is space to do so.
Washer-dryer stack
The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate "WTV"
stacking kit* to match your dryer is
required.
All parts marked* are available from
your Dealer or Miele.
Please note:
a = at least 2 cm
b = WTV without drawer: 172 cm
WTV with drawer: 181 cm
c = 68 cm
Installation and connection
66
The water protection system
The Miele water protection system
protects all parts of the washing
machine from water damage.
The system consists of three main
components:
– the inlet hose
– the electronic unit and drainage and
overflow protection
– the drain hose
Inlet hose
– Protection against bursting
The inlet hose is tested to withstand
pressure of at least 7,000 kPa.
Electronic unit and washing machine
housing
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the water inlet
valves, preventing any more water
from flowing into the machine and
water in the suds container is
pumped away.
– Overflow protection
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being emptied
completely.
Installation and connection
67
Connection to the water supply
The washing machine should be
connected to a mains water supply in
accordance with current local and
national safety regulations. The German
authorities do not require it to have a
non-return valve as the washing
machine has been designed to comply
with DIN regulations.
The machine is designed to operate
with a flow pressure of between 100
and 1,000kPa. If it is higher than
1,000kPa it is essential to fit a pressure
reducing valve.
Connection to the mains water supply
should incorporate a mains stopcock
with ¾" threaded union. The stopcock
should be fitted by a qualified plumber.
The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
Maintenance
Only use a genuine Miele hose should
you ever need a replacement or
extension. These are tested to
withstand pressure of at least
7,000kPa.
In order to protect the water inlet
valve, the two dirt filters (one in the
open end of the inlet hose, the other
in the inlet point in the machine)
must not be removed.
Extension hose
Longer hoses 2.5 or 4.0 m in length are
available from your Miele Dealer or
Miele as optional extras.
Installation and connection
68
Connection to the drainage
system
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can be purchased from
your Miele Dealer or Miele.
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact Miele or your Miele
Dealer for advice. If necessary, the
drain hose can be extended to a length
of 2.5 m. The necessary parts can be
purchased from your Miele Dealer or
Miele.
Drain hose connection:
1. Direct into a sink or basin.
Please note the following:
– Hook the hose over the edge and
secure.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the
drained water being sucked back
into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
3. Connected securely to a floor gully.
4. Connected securely to a standpipe.
Please note:
Adapter
Nut
Hose clip
End of the hose
Fit adapter to the sink drain outlet
using nut .
Attach the end of the hose to
adapter .
Use a screwdriver to tighten hose clip
up close to the nut.
Installation and connection
69
Electrical connection U.K.
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of plug
fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Consumption data
70
Load Energy Water Duration Residual
moisture
kg kWh Litres h:min %
Cottons 90°C 8.0 2.30 58 2:29 50
60°C 8.0 1.35 58 2:29 50
60°C 4.0 1.15 49 2:19 50
* 8.0 0.92 48 2:59 44
* 4.0 0.80 46 2:59 44
40°C 8.0 1.10 54 2:39 50
* 4.0 0.60 39 2:59 44
20°C 8.0 0.42 54 2:39 46
Minimum iron 30°C 4.0 0.50 52 1:59 30
Delicates 30°C 3.0 0.40 40 1:09 –
Woollens 30°C 2.0 0.23 35 0:38 –
Express 20
1)
40°C 3.5 0.34 30 0:20 –
Shirts
2)
60°C 2.0 0.77 40 1:31 –
1)
Short option activated
2)
Pre-ironing option deactivated
Note for test institutes
*
Test programme in accordance with EN 60456 and energy label with
Directive 1061/2010
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any options selected.
Technical data
71
Height 850 mm
Width 596 mm
Depth 636 mm
Depth with door open 1054 mm
Height for building under 850 mm
Width for building under 600 mm
Weight Approx. 100 kg
Capacity 8 kg dry laundry
Voltage See data plate
Connected load See data plate
Fuse rating See data plate
Consumption data See "Consumption data"
Minimum flow pressure 100 kPa
Maximum flow pressure 1000 kPa
Inlet hose length 1.60 m
Drain hose length 1.50 m
Mains connection cable length 2.00 m
Delivery head max. 1.00 m
Maximum drainage length 5.00 m
LEDs Class 1
Test certificates awarded See data plate
Power consumption when switched off 0.1 W
Power consumption when not switched off 3.0 W
Settings
72
You can use the settings menu to alter
the machine's electronics to suit
changing requirements.
Settings can be altered at any time.
To access Settings
Before you begin, ensure that:
– The washing machine is switched on.
– The standard display is showing.
OK
2:59
1600
Touch the and sensors at the
same time.
Language 
You are now in the Settings menu.
Changing a setting
Touching the sensor will call up the
different options for the setting.
The option which is selected will have
a tick next to it.
When the option you want shows in
the display touch the OK sensor to
activate it.
Exiting a setting
Touch the or sensor repeatedly
until Back  appears in the display.
Touch the OK sensor.
Settings
73
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.
Degree of soiling
You can select the default setting for
the degree of soiling or switch the
degree of soiling query on or off.
Options
– Default setting
You can choose between the Light,
Normal or Heavy degree of soiling
settings.
Factory default setting: Normal
– Query
You can switch the degree of soiling
query on or off.
Factory default setting: Off
Buzzer volume
You can select one of seven different
settings for the buzzer volume.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.
Keypad tone
Each touch of a sensor or press of a
button is confirmed with an audible
tone.
The volume for the keypad tone can be
set to one of seven different settings.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.
The keypad tone is set to mid-volume
ex-works.
Settings
74
Code
The code prevents the washing
machine being used without your
knowledge.
Options
– Activate
The code is 125 and can be
activated.
When the code has been activated,
you have to enter the code after
switching the washing machine on.
Otherwise the washing machine
cannot be operated.
– Deactivate
For using the washing machine
without entering the code. This only
appears if the code has been
activated previously.
– Change
You can enter a code of your own.
Important. Make a note of your new
code. If you forget the code, the
washing machine will need to be
unlocked by Miele Service.
Temperature unit
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
Factory default setting: Celsius (°C).
Display brightness
There are seven different display
brightness settings.
The brightness changes as soon as you
select a different setting.
Dark display
To save energy, the display will go out
and the Start/Stop button will flash
slowly.
Options
– On
The display will go out after 10
minutes.
– On (not in current programme)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the
programme.
– Off
The display will remain on.
Factory default setting: the On (not in
current programme) option is selected.
Settings
75
Machine switch-off
The washing machine will switch off
automatically after the end of the
programme/anti-crease phase or after
being switched on if no further
selection is made.
Options
– 15 minutes (Factory default setting)
The washing machine will switch
itself off after 15 minutes.
– 20 minutes
The washing machine will switch
itself off after 20 minutes.
– 30 minutes
The washing machine will switch
itself off after 30 minutes.
Display maximum load
After a programme is selected the
maximum load appears in the display
for a short time.
You can choose whether the maximum
loading capacity is displayed or not.
Factory default setting: Display
maximum load is switched on.
Display programme name
The name of the selected programme
is shown briefly in the display.
You can choose whether the
programme name is displayed or not.
Factory default setting: the Display
programme name setting is switched
off.
Settings
76
Memory
The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.
When this programme is chosen again,
these saved settings will appear in the
display.
Factory default setting: the Memory
function is switched off.
Pre-wash Cottons
If you require a longer pre-wash you
can extend the Cottons programme's
standard pre-wash time of 25 minutes
Options
– No increase (Factory default setting)
25 minute pre-wash
– +6 min
31 minute pre-wash
– +9 min
34 minute pre-wash
– +12 min
37 minute pre-wash
Gentle action
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently.
Gentle action can be activated for the
Cottons and Minimum iron
programmes.
Factory default setting: Gentle action is
switched off.
Reduce temp.
The boiling point for water is lower at
high altitudes. In order to avoid water
boiling, Miele recommend activating
the reduce temperature setting at
altitudes of more than 2000m above
sea level. The maximum temperature
is reduced to 80°C even when a
higher temperature is selected.
Factory default setting: the reduce
temperature setting is switched off.
Settings
77
Water plus
You can increase the set amount of
water in the wash programmes.
Options
– Water +
The water level is increased in the
wash and rinse stages.
– Extra rinse
An extra rinse is carried out.
– Water + and Extra rinse
The water level is increased in the
wash and rinse stages and an extra
rinse is carried out.
Water plus level
The water level can be increased in 4
stages by activating the Water plus
option.
Stages:
– Normal (Factory default setting)
– Plus
– Plus
– Plus
Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy
sufferers as it achieves an excellent
rinse result. Water consumption will
increase.
Factory default setting: the maximum
rinse level setting is switched off.
Suds cooling
When this is activated, additional
water flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a
temperature of 70°C or higher is
selected for the Cottons programme.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where drainage pipes do not comply
with DIN 1986.
Factory default setting: Suds cooling is
switched off.
Settings
78
Low water pressure
If the water pressure is less than 1bar
(100kPa) the programme will be
cancelled and the fault message Water
intake See  will appear.
If the on-site water pressure cannot be
increased, activating this function will
prevent the programme from being
cancelled.
Factory default setting: Low water
pressure is switched off.
Anti-crease
The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30 minutes at the end of the
programme. The door can be opened at
any time.
Factory default setting: anti-crease is
switched on.
Optional accessories
79
Detergent, fabric care, additives and
machine care products are available for
this washing machine. All the products
have been designed for Miele washing
machines.
These and many other useful products
can be ordered via the internet at
www.miele-shop.com or from Miele
(see end of this booklet for contact
details).
Detergent
UltraWhite
– powder detergent
– suitable for white and light coloured
laundry as well as heavily soiled
cotton items
– effective stain removal even at low
temperatures
UltraColor
– liquid detergent for coloureds
– suitable for coloured and dark/black
garments
– protects bright colours from fading
– effective stain removal even at low
temperatures
Wool and delicates detergent
– liquid detergent for delicates
– particularly suitable for woollen and
silk garments
– cleans at temperatures as low as
20°C, helps retain the shape of
delicate garments and protect
colours
Specialist detergents
Specialist detergents are available as
capsules in convenient single dose
amounts or in a handy bottle.
Outerwear
– liquid detergent for outerwear and
performance clothing
– cleans with care and is gentle on
colours
– with lanolin to care for and condition
membrane fabric
Sports
– liquid detergent for sportswear and
fleece garments
– neutralises unpleasant odours
– retains the shape of the textiles
Optional accessories
80
Down items
– liquid detergent suitable for pillows,
sleeping bags and down filled items
– retains the elasticity of down and
feather filled items
– retains the breathability of down filled
items
– prevents down filling clumping
together
WoolCare
– liquid detergent for woollens and
delicates
– with a special wheat protein
conditioning formula
– helps prevent pilling
– gentle on colours
– only available as capsules
SilkCare
– liquid detergent for silks
– with a special silk protein
conditioning formula
– gentle on colours
– only available as capsules
Fabric care
Fabric care agents are available as
capsules in convenient single dose
amounts or in a handy bottle.
Reproofing agent
– for reproofing microfibre garments
e.g. rain coats etc.
– retains the breathability of garments
Fabric conditioner
– fresh, natural fragrance
– makes laundry soft to handle
Additives
Booster
– for removing stains
– suitable for white and coloured
laundry
– available as capsules in
convenient single dose amounts
Machine care products
Machine cleaner
– for cleaning the washing machine
thoroughly and effectively
– removes grease, bacteria and
unpleasant odours
Descaling agent
– removes heavy limescale deposits
– mild and gentle with natural citric
acid
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: mielecare@miele.co.uk
Internet: www.miele.co.uk
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive, Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
E-mail: info@miele.cn, Internet: www.miele.cn
China
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025, Fax: (852) 3579 1404
Email: customerservices@miele.com.hk
Website: www.miele.hk
Miele (Hong Kong) Limited
Miele India Pvt. Ltd.
Ground Floor, Copia Corporate Suites
Plot No. 9, Jasola, New Delhi - 110025
Tel: 011-46 900 000, Fax: 011-46 900 001
E-mail: customercare@miele.in, Internet: www.miele.in
India
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus, Dublin 24
Tel: (01) 461 07 10, Fax: (01) 461 07 97
E-Mail: info@miele.ie, Internet: www.miele.ie
Ireland
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1, Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Miele New Zealand Limited
IRD 98 463 631
Level 2, 10 College Hill
Freemans Bay, Auckland 1011, NZ
Tel: 0800 464 353
Internet: www.miele.co.nz
New Zealand
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191, Fax: +65 6735 1161
E-Mail: info@miele.com.sg
Internet: www.miele.sg
Singapore
Miele (Pty) Ltd
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000, Fax: (011) 875 9035
E-mail: info@miele.co.za
Internet: www.miele.co.za
South Africa
Miele Appliances Ltd.
Gold & Diamond Park
Office No. 217-6, Sheikh Zayed Road
P.O. Box 11 47 82 - Dubai
Tel. +971 4 3044 999
Fax. +971 4 3418 852
800-MIELE (64353)
E-Mail: info@miele.ae
Website: www.miele.ae
United Arab Emirates
Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Manufacturer:
Miele & Cie. KG
M.-Nr. 10 555 920 / 00en-GB
WKB 130
… 10 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Miele-WKB130
6

  • bij een witwas op 40 graden geeft hij een tijd van 2.39 aan. Na een achttal minuten geeft hij een resttijd van 1.13 minuten aan.Als je bedenkt dat hij al 30 minuten nodig heeft om te spoelen en centrifugeren blijft er niet veel wastijd meer over. Gesteld op 1-9-2018 om 10:52

    Reageer op deze vraag Misbruik melden

  • Mijn wasmachine geeft aan hygiene info? Wat te doen Gesteld op 8-1-2017 om 14:28

    Reageer op deze vraag Misbruik melden

  • De wasmachine van miele geeft aan "geen andere keuze". Ik kan niks meer doen; enkel de pwoer aan ene uit doen. De deur gaat niet openen. Mijn w as zit erin... Gesteld op 26-11-2015 om 14:21

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Miele WKB130 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Miele WKB130 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Miele WKB130

Miele WKB130 Gebruiksaanwijzing - Nederlands - 84 pagina's

Miele WKB130 Snelstart handleiding - Deutsch - 2 pagina's

Miele WKB130 Gebruiksaanwijzing - Deutsch - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info