Handleiding Miele W 5824 (pagina 56 van 68) (Engels)

551375

Verklein

Vergroot

Pagina terug

1/68

Pagina verder

Operating instructions

for Washing machine

W 5824

To avoid the risk of accidents or

damage to the machine it is

essential to read these instructions

before it is installed and used for the

first time.

M.-Nr. 09 210 550

en-GB

Disposal of the packing

material

The transport and protective packing

has been selected from materials which

are environmentally friendly for disposal

and should be recycled.

Ensure that any plastic wrappings,

bags etc. are disposed of safely and

kept out of the reach of babies and

young children. Danger of suffocation!

Disposal of your old machine

Electrical and electronic machines

often contain materials which, if

handled or disposed of incorrectly,

could be potentially hazardous to

human health and to the environment.

They are, however, essential for the

correct functioning of your machine.

Please do not therefore dispose of it

with your household waste.

Please dispose of it at your local

community waste collection / recycling

centre or contact your Dealer for

advice. Ensure that it presents no

danger to children while being stored

for disposal.

Caring for our environment

Caring for our environment .........................................2

Warning and Safety instructions .....................................6

Operating the washing machine.....................................10

Control panel .....................................................10

Before using for the first time.......................................12

Washing environmentally and economically ..........................13

Energy and water consumption ....................................13

Detergent .....................................................13

How to wash correctly.............................................14

Extra quiet.....................................................16

Spinning ........................................................19

Final spin speed ..................................................19

Delay start.......................................................20

Programme chart .................................................21

Extras ..........................................................24

Garment care label symbols ........................................25

Programme sequence .............................................26

Changing the programme sequence .................................28

Cancelling a programme ............................................28

Interrupting a programme ...........................................28

Changing a programme ............................................28

Adding or removing laundry after a programme has started ................29

Safety lock .......................................................29

Contents

Detergent .......................................................30

The correct detergent ..............................................30

Water softener ....................................................32

Washing with several components ....................................32

Fabric conditioners and liquid starch ..................................33

Automatic dispensing of fabric conditioner or liquid starch to laundry

at the end of a programme ........................................33

Colour run and dye removers / dyes ...................................33

Cleaning and care ................................................34

Cleaning the drum (Hygiene info) .....................................34

External casing and fascia panel .....................................34

Cleaning the detergent dispenser drawer...............................34

Cleaning the water inlet filters ........................................36

Problem solving guide ............................................37

The programme does not start .......................................37

The following fault messages appear in the display and the programme stops. . 38

The following fault messages appear in the display at the end of the programme . . 39

General problems .................................................40

An unsatisfactory wash result ........................................41

The drum door does not open when you press the Door button..............42

Opening the drum door in the event of a blocked drain outlet and/or

power failure .....................................................43

Blocked drain outlet .............................................43

After sales service ................................................45

Future updates (PC) .............................................45

Guarantee .....................................................45

Optional spare parts and accessories ...............................45

Installation and connection ........................................46

Front view........................................................46

Rear view ........................................................47

Installation surface.................................................48

Transporting the washing machine to its installation site .................48

Removing the transit bars ...........................................48

Re-fitting the transit bars ............................................50

Contents

Levelling the machine ..............................................51

Screwing out and adjusting the feet .................................51

Building under a continuous worktop/in a kitchen run ...................52

Washer and Dryer stack ..........................................52

The Miele water protection system ....................................53

Connection to the water supply .......................................54

Connection to the drainage system....................................55

Electrical connection U.K. ...........................................56

Consumption data ................................................57

Notes for test institutes: ..........................................57

Technical data ...................................................58

Programmable functions...........................................59

To access programmable functions .................................59

To select a programmable function .................................59

To alter a programmable function ..................................59

To come out of programmable functions .............................59

Language

! ......................................................59

Water plus .......................................................60

Gentle action .....................................................60

Suds cooling .....................................................60

Code ...........................................................61

Temperature unit ..................................................62

Buzzer ..........................................................62

Keypad tone .....................................................62

Brightness .......................................................62

Contrast .........................................................62

Standby display ...................................................63

Memory .........................................................63

Anti-crease.......................................................63

Optional accessories..............................................64

CareCollection ....................................................64

Contents

This washing machine conforms to

current safety requirements.

Inappropriate use can, however,

lead to personal injury and damage

to property.

To avoid the risk of accidents and

damage to the washing machine,

please read these instructions

carefully before using it for the first

time. They contain important

information on its installation, safety,

use and maintenance.

Keep these instructions in a safe

place and ensure that new users are

familiar with the content. Pass them

on to any future owner.

Correct application

This washing machine is not

designed for commercial use. It is

intended for use in domestic

households and in similar working and

residential environments such as:

–

Shops

–

Offices and showrooms

and by residents in establishments

such as

–

Hostels and guest houses

This washing machine is not

intended for outdoor use.

It must only be used as a domestic

appliance to wash items which are

specified by the manufacturer as being

washable on the care label.

Any other usage is not supported by

the manufacturer and could be

dangerous. Miele cannot be held liable

for damage resulting from incorrect or

improper use or operation of the

washing machine.

This washing machine is not

intended for use by people with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they are supervised

whilst using it or have been shown how

to use it by a person responsible for

their safety.

Safety with children

Keep children away from the

washing machine at all times. It is not a

toy! To avoid the risk of injury do not

allow children to play on or near it or to

play with its controls. Supervise

children whilst you are using it.

Older children may only use the

washing machine if its operation has

been clearly explained to them and

they are able to use it safely,

recognising the dangers of misuse.

For machines with a 'porthole' door,

remember that the porthole glass will

be hot when washing at very high

temperatures.

Do not let children touch it.

Warning and Safety instructions

Technical safety

Before setting up the washing

machine, check it for any externally

visible damage.

Do not install or use a damaged

washing machine.

Before connecting the washing

machine, ensure that the connection

data on the data plate (voltage and

connected load) match the mains

electricity supply. If in any doubt,

consult a qualified electrician.

The electrical safety of this washing

machine can only be guaranteed when

continuity is complete between it and

an effective earthing system which

complies with current local and national

safety regulations. It is most important

that this basic safety requirement is

present and regularly tested, and

where there is any doubt the household

wiring system should be inspected by a

qualified electrician. The manufacturer

cannot be held liable for the

consequences of an inadequate

earthing system (e.g. electric shock).

Do not connect the washing

machine to the mains electricity supply

by an extension lead. Extension leads

do not guarantee the required safety of

the appliance (e.g. danger of

overheating).

Faulty components must only be

replaced by genuine Miele original

spare parts. Only when these parts are

fitted can the safety standards of the

machine be guaranteed.

Unauthorised repairs could result in

unforeseen dangers for the user, for

which Miele cannot accept liability.

Repairs should only be undertaken by a

Miele approved service technician.

Ensure current is not supplied to the

machine until after maintenance or

repair work has been carried out.

If the connection cable is faulty it

must only be replaced by a Miele

approved service technician to protect

the user from danger.

In the event of a fault or for cleaning

purposes, the washing machine is only

completely isolated from the electricity

supply when:

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the mains, or

– the mains fuse is withdrawn, or the

screw-out fuse is removed (in

countries where this is applicable).

This washing machine must only be

connected to the on-site water supply

using a new hose kit. Old hoses must

not be re-used.

In countries where there are areas

which may be subject to infestation by

cockroaches or other vermin, pay

particular attention to keeping the

machine and its surroundings in a

clean condition at all times. Any

damage which may be caused by

cockroaches or other vermin will not be

covered by the guarantee.

Warning and Safety instructions

This appliance must not be used in

a non-stationary location (e.g. on a

ship).

Do not make any alterations to the

washing machine, unless authorised to

do so by Miele.

Correct use

Do not install your washing machine

in rooms where temperatures below

freezing may occur. Frozen hoses may

burst or split. The reliability of the

electronic control unit may be impaired

at temperatures below freezing point.

Before using the washing machine

for the first time, check that the transit

bars at the rear of the machine have

been removed (see section on

"Installation and connection"). During

spinning, a transit bar which is still in

place may result in damage to both the

machine and adjacent furniture or

appliances.

Turn off the stopcock if the machine

is to be left for any length of time (e.g.

holiday), especially if there is no floor

drain (gully) in the immediate vicinity.

Flooding danger.

If hooking the drain hose into a wash

basin, check that the water can drain

off quickly enough to prevent the sink

from overflowing. Make sure the drain

hose is secure, so that the force of the

water flowing out of the hose does not

dislodge it.

Take care to ensure that foreign

objects (e.g. nails, pins, coins, paper

clips) do not find their way into the

machine with the laundry. These may

damage components of the machine

(e.g. suds container, drum), which in

turn can result in damage to the

laundry.

Warning and Safety instructions

If the correct amount of detergent is

dispensed, the machine should not

need to be descaled. If, however, you

do wish to descale the machine only

use proprietary non-corrosive descaling

agents and strictly observe the

instructions on the packaging. A

special descaling agent is available to

order from the Miele Spare Parts

Department or via the internet on

www.miele-shop.com.

Textiles which have been pre-

treated with solvent based cleaning

agents must be thoroughly rinsed in

clean water before being washed in the

machine.

Never use solvent based cleaning

agents, e.g. those containing benzene,

in this machine, as this may result in

damage to component parts and create

toxic fumes. Such agents also pose a

fire and explosion hazard.

Never use solvent based cleaning

agents, e.g. those containing benzene,

to clean the outside surfaces of this

machine. They can cause damage to

plastic surfaces.

Only use dyes specified by the

manufacturer as being suitable for use

in a domestic washing machine. Always

observe the manufacturer's instructions

carefully.

Colour run and dye removers

contain sulphur compounds which can

cause damage such as corrosion. Do

not use these products in this machine.

If detergent comes into contact with

the eyes, rinse them thoroughly with

lukewarm water immediately. If

swallowed, seek medical assistance

immediately and retain the packaging

or label for reference. Those with skin

problems or sensitive skin should avoid

their skin coming into contact with

detergent.

Only remove laundry from the

washing machine once the drum has

stopped turning. Reaching into a

moving drum is extremely dangerous

and could result in injury.

Accessories

Accessory parts may only be fitted

when expressly approved by Miele. If

other parts are used, guarantee,

performance and product liability

claims will be invalidated.

Miele cannot be held liable for

damage caused by non-compliance

with these Warning and Safety

instructions.

Warning and Safety instructions

Control panel

a Extra option buttons

Various extra options can be added

to the washing programmes.

b Display

See the following page for more

information.

c Delay start button

For delaying the start time of a

programme.

d Temperature button

For selecting a temperature.

e Spin speed button

For selecting the final spin speed or

e (Rinse hold) or No . (Without

spin).

f PC / Optical interface

This is used by service technicians

to run diagnostic checks on your

machine and can also be used to

update programming data in the

future.

g Start/Stop button

For starting the programme selected

and cancelling a programme once it

has started.

h Programme selector

For selecting a programme. The

indicator light next to the selected

programme will come on. The

programme selector can be turned

clockwise or anti-clockwise.

i K button

For switching the washing machine

on and off.

To save energy, the washing

machine will switch itself off

automatically 15 minutes after the

end of the programme/anti-crease

phase or after being switched on if

no other selection is made.

j Door button

Opens the machine door.

Operating the washing machine

The following are selected via the

display:

– wash temperature

– spin speed

– delay start

– cancellation of a programme

– safety lock

– programmable functions

The display also shows:

–

the programme duration

–

the programme sequence

Programme duration

After the start of a programme, the

estimated programme duration will

appear in the display in hours and

minutes.

When delay start is being used, the

programme duration will appear after

the delay start time has elapsed.

During the first 8 minutes the washing

machine measures how much water is

being absorbed by the laundry and

uses this to calculate the load. The

programme duration may be longer or

shorter depending on this absorbency

rate.

Delay start

The delay start time selected will

appear in the display.

After the Start/Stop button has been

pressed, the delay start time will start

counting down. If the delay start time is

more than 10 hours, it will count down

by the hour. If it is less than 9 hours and

59 minutes it will count down minute by

minute.

Once the delay start time has elapsed,

the programme begins and the

estimated programme duration shows

in the display.

Programmable functions

The programmable functions can be

used to tailor washing programmes to

suit your individual requirements. In

programming mode, the display will

show the function selected.

Operating the washing machine

Before using the machine for the first

time ensure that it is correctly

installed and connected. See

"Installation and connection". Also

check that the drain filter is securely

tightened to prevent the risk of water

leaks during use.

This washing machine has

undergone a thorough functional test

in the factory and there will be some

residual water in the drum from this

process.

For safety reasons, spinning is not

possible until the machine has been

prepared for using for the first time. To

activate the spinning function you must

run a wash programme without laundry

and without detergent.

Using detergent could result in an

excessive build-up of foam.

This also activates the ball valve. The

ball valve prevents detergent escaping

from the suds container into the sump

during a wash programme, thus making

maximum use of the detergent.

Press the K button in.

If the washing machine is being

switched on for the first time, the

welcome screen will appear.

The welcome screen will appear in

the display every time the machine is

switched on until a programme

lasting longer than 1 hour has been

completed.

Setting the language

You will be asked to select the

language you require for the display. It

is possible to change the language at

any time via the programmable

functions.

! deutsch

If the language shown is not the one

you want, select the language you do

want by turning the programme

selector. Confirm your selection by

pressing the Start/Stop button.

Reminder to remove transit bars

To avoid the risk of damage, the

transit bars must be removed before

the machine is used for the first time.

See "Installation and connection" for

instructions on how to do this.

^ After removing the transit bars (if this

has not already been done by your

fitter), press the Start/Stop button.

Running your first programme

Run the Cottons 60°C programme

without any laundry and without

detergent.

Open the stopcock.

Press the Start/Stop button.

At the end of the programme switch

the machine off.

The machine is now ready for use.

Before using for the first time

Energy and water consumption

–

Water consumption and energy

usage are determined by the size of

the load.

To make the most out of your

machine, load the maximum dry load

for the programme you are using.

–

When smaller amounts of laundry are

washed, the automatic load

recognition system will reduce the

amount of water, time and energy

used. This may mean that the time

left shown in the display is adjusted

during the course of the wash

programme.

– Use the Express 20 programme for

small loads.

– Modern detergents make it possible

to wash at lower temperatures (e.g

20°C). Washing using lower

temperature settings will save

energy.

– To maintain the hygiene of the

washing machine carry out a hot

wash (60°C or above) using powder

detergent at regular intervals. The

Hygiene info message will appear in

the display to remind you to carry out

a hot wash.

Detergent

–

Do not exceed the amounts of

detergent recommended by the

manufacturer on the packaging.

–

Adjust the dosage to the degree of

soiling of the laundry.

–

Reduce the amount of detergent with

smaller loads (approx.

less than

the amount recommended can be

used when washing a half load).

Choosing the correct extra option

(Short, Pre-wash and Pre-wash +

soak)

Select:

– A wash programme together with the

Short extra option for light to normal

soiling where there are no obvious

marks.

– A wash programme without any extra

options for normal to heavy soiling

with visible staining.

–

A wash programme together with the

Pre-wash + Soak extra option for

very heavily soiled laundry

–

The Pre-wash extra option for laundry

with large amounts of dirt (e.g. dust,

sand).

When drying with a tumble dryer

Selecting the highest possible spin

speed for the wash programme will

save energy when drying in a tumble

dryer afterwards.

Washing environmentally and economically

Brief instructions

The headings numbered A, B, C,...

show the operating sequence and can

be used as brief instructions.

A Sort the laundry

^ Empty all pockets.

Foreign objects (e.g. nails,

coins, paper clips, etc.) can cause

damage to garments and

components in the machine.

Badly soiled areas, stains etc. should

be cleaned as soon as possible,

preferably whilst still fresh. Spillages

should be carefully dabbed off using

a soft colourfast cloth. Do not rub!

Badly soiled areas can be pre-treated

with liquid detergent, stain removers

etc. first, following the manufacturer's

instructions. With particularly stubborn

stains ask your dry cleaner for advice.

If you use a solvent-based clean

ing agent (e.g. one containing ben

zene) to pre-treat a stain, make sure

that any plastic parts (e.g. buttons)

are protected, and that the cleaning

agent is rinsed off before washing the

garment in the machine.

Do not use solvent-based

cleaning agents in or on this machine.

Sort the laundry by colour and by

care label. Most garments have a

textile care label in the collar or side

seam.

Dark textiles often contain excess dye

and should be washed separately

several times before being included in

a mixed load. Always wash whites and

coloureds separately.

– Curtains: Remove lead weights first

or place in a laundry bag.

–

Underwiring and collar stiffeners:

Any loose wiring in bras, shirt collar

stiffeners, etc. should be removed or

sewn in.

–

Knitted garments, trousers and

jeans, T-shirts and sweat shirts: Turn

inside out, if recommended by the

manufacturer.

–

Close any zips, fasten hooks and

eyes etc before washing.

–

Fasten duvet covers etc. to prevent

small items from being rolled up

inside them.

Do not wash any items in this machine

which are specified by the

manufacturer as not washable on the

care label. (h symbol)

How to wash correctly

B Switch on the washing machine

C Load the drum

Press the Door button to open the

drum door.

Unfold the laundry and load loosely

into the drum. Mixing both large and

small items gives better wash results

and also helps distribute the load

evenly during spinning.

The most efficient use of energy and

water is achieved when a full load is

washed. However, do not overload as

this causes creases and reduces

cleaning efficiency.

Make sure that no items are caught

between the drum door and seal.

Shut the door with a gentle swing.

D Select a programme

Turn the programme selector

clockwise or anti-clockwise to the

required programme. The

programme indicator light for the

programme selected will come on.

E Select a temperature / spin speed

The suggested temperature and/or spin

speed can be changed.

2:59 60° 1600

Press the Temperature button to alter

the temperature and press the Spin

speed button to alter the spin speed.

How to wash correctly

F Select an extra option(s)

^ Select an extra option by pressing

the appropriate button. The relevant

indicator light will come on to show

which extra option has been

selected.

Not all the extra options are suitable for

use with every programme.

You can only select extra options which

are compatible with the programme

being used.

Short

For light to normal soiling with no visible

staining.

The duration of the main wash is

reduced.

Water plus

The water level in the main wash and

the rinses will be increased if the Water

plus option is selected.

However, you can select other settings

for Water plus. These are described in

"Programmable functions".

Pre-wash

The Pre-wash

button is used for

activating the Pre-wash option on its

own as well as a Pre-wash with an

additonal soak time of one or two hours.

Press the button:

x 1 = Pre-wash

x 2 = Pre-wash+1hsoak

x 3 = Pre-wash+2hsoak

x 4 = No options selected

Extra quiet

If using your washing machine during

quiet periods, you can reduce the noise

levels even more.

The machine will activate the Rinse

hold (e) option and not spin if the

Extra quiet option is selected. The

programme duration is longer.

To deactivate Rinse hold

Use the Spin speed button to select

the spin speed you want.

By using Delay start you can make

sure the final spin occurs outside

quiet periods in the home.

How to wash correctly

G Select Delay start (if required)

The start of a programme can be

delayed from 30 minutes up to 24

hours, allowing you to make use of

night-time economy electricity rates, for

example.

See "Delay start" for more information.

H Add detergent

It is important to dispense the correct

amount, because... . .

. . . too little detergent results in:

–

Laundry not getting properly clean

and with time it may become grey

and hard to the touch.

– Greasy particles clinging to the

laundry.

– Limescale deposits on the heater

elements.

. . . too much detergent results in:

– Excessive foam which causes a low

level of agitation and poor wash,

rinse and spin results.

–

Higher water consumption (an

additional rinse cycle will

automatically switch in).

–

A burden to the environment.

Pull out the detergent drawer and

add detergent to the compartments

as follows:

Detergent for the pre-wash (divide

the total recommended amount as

follows: add

to compartment i

and

to compartment j)

Detergent for the main wash,

including Soak if selected

Fabric conditioner or liquid starch

Close the detergent drawer.

See "Detergent" for further information.

How to wash correctly

I Start the programme

Press the flashing Start/Stop button.

If a delay start time has been selected,

then this will count down in the display.

At the end of the delay start time or im

mediately after the programme has

started (if no delay start time has been

selected) the estimated programme

duration will appear in the display.

During the first 8 minutes the machine

measures how much water is being

absorbed by the laundry. The

programme duration may be longer or

shorter depending on this absorbency

rate.

The programme sequence is also

shown in the display. The washing

machine shows you when each section

of the programme is reached.

J Remove the laundry when the

programme has finished

In the anti-crease phase after the

programme has finished, the following

will appear alternately in the display:

0:00 Anti-crease

and

0:00 Finish

Press the Door button to open the

drum door.

The washing machine will switch off

automatically 15 minutes after the

end of the anti-crease phase. You will

need to press the K button to switch

it back on again.

Remove the laundry.

Check that all items have been

removed from the drum. Items left in

the drum could discolour other items

in the next wash or become

discoloured themselves.

^ Check the folds in the door seal for

any small articles, e.g. buttons, which

might be lodged there.

^ Switch the machine off with the

K button.

Close the drum door. Otherwise there

is the danger of objects being placed

inadvertently in the drum. If these

remained unnoticed and were

washed in the next load, they could

damage the laundry.

How to wash correctly

Final spin speed

You can reduce the final spin speed.

However, you cannot select a final spin

speed higher than that shown in the

chart above.

Rinse and interim spin

There is a spin after the main wash and

between the rinses. A reduction in the

final spin speed will also reduce the

interim spin speed. If a spin speed of

less than 700 rpm is selected for a

Cottons programme, an additional rinse

is introduced.

To omit the final spin (Rinse hold)

Select the Rinse hold (e) setting

using the Spin speed button. The

laundry will not be spun and will

remain suspended in the final rinse

water. This reduces creasing if the

laundry is not going to be removed

from the drum immediately after the

end of the programme.

–

To start the final spin

The washing machine will display the

maximum spin speed possible. You

can select a spin speed lower than

this. Start the final spin by pressing

the Start/Stop button.

– To end the programme

Press the Door button. The water will

drain away. Press the Door button

again to open the door.

To omit rinse and interim spin and

the final spin (No .)

Select the No . setting using the

Spin speed button.

The laundry is not spun after the final

rinse. The water will drain away and the

machine will go straight into the anti-

crease stage.

With some programmes an additional

rinse is introduced if this setting is

selected.

Spinning

Programme rpm

Cottons 1600

Minimum iron 1200

Delicates 600

Woollens / 1200

Proofing 1000

Express 20 1600

Automatic plus 1200

Dark garments / Denim 1200

Shirts 600

Intensive plus 1600

Spin 1600

Separate rinse/Starch 1600

Delay start allows you to choose when

you want the programme to start. The

start of a programme can be delayed

from 30 minutes up to a maximum of 24

hours, allowing you to make use of

night-time economy electricity rates, for

example.

Selecting delay start

Press the Delay start button. The

following will appear in the display:

0:30 , 60° 1600

Each press on the Delay start button

increases the delay start time:

– in 30 minute steps up to 10 hours,

– in 1 hour steps from 10 hours

upwards.

If you keep the Delay start button

pressed in, the time will continue to

count up to 24 hours.

Activating delay start

Press the Start/Stop button to activate

delay start. The following will appear

in the display:

4:30 , until start

After the delay start time has elapsed,

the washing programme will start and

the estimated programme duration and

the programme sequence will show in

the display.

Altering delay start

You can change the delay start time at

any time by pressing the Delay start

button.

Cancelling delay start before delay

start has been activated

Press the Delay start button until

24 h appears in the display. Then

press the Delay start button again

briefly to cancel delay start.

If you cancel delay start after the delay

start time has started counting down,

the washing programme will start imme-

diately.

Delay start

Programme chart

Cottons 9876* cold to 90°C Max. load 7.0 kg

Use for Cotton, linen or cotton mix fabrics, e.g. table linen, towelling,

underwear, T-shirts etc.

Note The 60°/40°C programmes differ from the Eco

/Eco

programmes as follows:

–

Shorter programme duration

–

Longer temperature holding times

–

Higher energy consumption

Where particularly high levels of hygiene are required please

select a temperature of 60°C or higher.

Minimum iron

43218E76*

cold to 60°C Max. load 3.5 kg

Use for Synthetic, mixed fibre and easy care cotton. If fabrics have a high

proportion of man-made fibres it is advisable to programme the

machine for "Gentle action".

Note Reduce the spin speed for fabrics which crease easily.

Cottons Eco

/Eco

Max. load 7.0 kg

Use for Normally soiled cotton garments

Note – These settings are the most efficient in terms of energy and

water consumption for washing cottons.

– With Eco

the actual wash temperature reached will be lower

than 60°C although the wash performance is the same as with

the standard Cottons 60°C programme.

Note for test institutes:

The test programme conforms to EN 60456 and the energy label with

Directive 1061/2010.

Programme chart

Express 20 76* cold to 40°C Max. load 3.5 kg

Use for Cotton and minimum iron garments that have hardly been worn or

are only very lightly soiled.

Note The Short extra option will be activated automatically.

Proofing 40°C Max. load 2.5 kg

Use for Treating microfibre fabrics, skiwear, and table linen made from

mainly synthetic fibres to provide a water and stain resistant finish.

Notes – The items should be freshly laundered and spun or dried before

proofing.

– For best results, the items should be heat-treated afterwards,

either in a tumble dryer or by ironing.

Delicates 4321ac* cold to 60°C Max. load 2.5 kg

Use for Delicate garments made from synthetic fibre, mixed fibre, rayon

and easy care cotton.

Curtains, including net curtains, specified as machine-washable

by the manufacturer.

Note

–

Dust in curtains usually makes using a programme with pre-

wash advisable.

–

Select No . (No spin) for items which crease easily.

Woollens /ac* cold to 40°C Max. load 2.0 kg

Use for Machine-washable or hand-washable wool or wool blend fabrics.

If the care label does not specify a temperature, wash using the

cold setting.

Note Reduce the spin speed for items which crease easily.

Automatic plus 7621* cold to 40°C Max. load 5.0 kg

Use for Mixed loads of garments suitable for the Cottons and Minimum

iron programmes. Sort according to colour.

Note The wash parameters (e.g. water level, wash rhythm and spin

speed) are adjusted automatically in this programme to ensure the

best possible care and wash result for each item.

* Please note that the "buckets" represent garment care label symbols. See

"Garment care label symbols".

Programme chart

Intensive plus cold to 90°C Max. load 7.0 kg

Use for Mixed loads of heavily soiled garments suitable for the Cottons

and Minimum iron programmes. Sort according to colour.

Notes – The pre-wash additional function will be activated automatically.

– The duration of the main wash will be longer.

Spin

Notes – To drain only: Select No . (No spin).

– Make sure you select the appropriate spin speed.

Separate rinse/Starch Max. load 7.0 kg

Use for – Rinsing handwashed items.

–

Starching table cloths, serviettes and workwear

Notes

–

Reduce the spin speed for fabrics which crease easily.

–

The laundry which is to be starched should be washed but not

treated with fabric conditioner.

–

You can achieve a particularly good rinse result with two rinses

by activating the Water plus extra option. For this, the Extra

rinse option of the Water plus programmable function must be

activated (see "Programmable functions" at the end of this

booklet).

Dark garments / Denim cold to 60°C Max. load 3.0 kg

Use for Black and dark garments made from cotton, mixed fibre or denim.

Notes

–

Wash inside out.

–

Denim often contains excess dye and may run during the first

few washes. Wash light and dark coloured items separately.

Shirts cold to 60°C Max. load 2.0 kg

Notes

–

Pre-treat collars and cuffs if necessary.

–

Wash silk shirts and blouses in the Delicates programme.

The following extra options can be selected in addition to the programme:

Short

Water plus

Pre-wash

Pre-wash + Soak

Extra quiet

Cottons XXXXX

Minimum iron XXXXX

Delicates X X X X

Woollens / X

Proofing X

Express 20 X

Automatic plus X

Dark garments / Denim X X X X

Shirts XXXXX

Intensive plus X X

Spin

Separate rinse/Starch X X

= The extra option is activated automatically as part of the programme

= The extra option is activated automatically as part of the programme and

cannot be deselected

Extras

Washing

The figure quoted in the bucket is the

maximum temperature the garment

can be washed at. The number of

bars under the symbol indicates the

level of agitation permitted.

9 No bar under the symbol: =

normal agitation

4 One bar under the symbol: =

reduced agitation

c Two bars under the symbol: =

much reduced agitation

/ Hand wash (if no temperature

is specified use the lowest

temperature or cold)

h Do not wash

Drying

The number of dots indicates the

drying temperature

q Normal temperature

r Low temperature

s Do not tumble dry

Ironing

The number of dots indicates the

ironing temperature

I Hot iron (max sole plate temp.

approx. 200°C)

H Medium hot iron (max sole

plate temp. approx. 150°C)

G Cool iron (max sole plate

temp. approx. 110°C). Do not

steam iron garments carrying

this symbol.

J Do not iron

Professional cleaning

f Dry clean only. The letters

indicate the type of cleaning

agent required.

w Professional Wet Clean only

D Do not dry clean

Bleaching

x Any oxidising bleaching

agent can be used

{ Only use an oxygen based

bleach or a non-chlorine

bleach

z Do not bleach

Garment care label symbols

Main wash Rinses Spinning

Water

level

Wash

rhythm

Water

level

Rinses Interim

spin

Final

spin

Programme sequence

Cottons d a ( 2-4

1)2)

Minimum iron ( c e 2-3

Delicates e d e 3 – L

Woollens /ef e 2 LL

Proofing ( d –––L

Express 20 d b d 1-3

Automatic plus ( abc e 2-3

Dark garments /

Denim

( b d 3 – L

Shirts e c e 2 – L

Intensive plus ( a ( 2-4

1)2)

Spin –– –––L

Separate rinse/Starch – – e 1 – L

Please see next page for description of the symbols

d = Low water level

( = Medium water level

e = High water level

a = Intensive rhythm

b = Normal rhythm

c = Gentle rhythm

d = Sensitive rhythm

e = Ultra sensitive rhythm

f = Handwash rhythm

This machine has fully electronic

controls with automatic load

recognition. It takes in the right amount

of water required for the programme

depending on the amount of laundry

and its absorbency rate. This means

that programme cycles and durations

can vary.

The programme sequences outlined in

the chart are based on the basic

programme with a full load. Extra

options which can be selected have not

been taken into account.

The display shows the stage the

programme has reached.

Special features in the programme

sequences:

Anti-crease:

At the end of the programme, the drum

continues to turn at intervals for up to

30 minutes to help prevent creasing.

Exception

: There is no anti-crease

phase in the Woollens programme.

The door can be opened and laundry

removed at any time during the anti-

crease phase.

A second rinse is carried out when a

temperature between 60°C and 95°C

has been selected. A third rinse is

carried out when a temperature

below 60°C is selected.

An third or fourth rinse is carried out

if:

– there is too much foam in the drum

– a spin speed lower than 700 rpm has

been selected

– No . has been selected.

A third rinse is carried out if:

No . has been selected.

Programme sequence

Cancelling a programme

You can cancel a programme at any

time after it has started.

Press the Start/Stop button.

Cancel programme

Press the flashing Start/Stop button

again.

The suds will be pumped away.

If you want to remove the laundry:

Press the Door button.

If you want to select a different

programme:

^ Switch the machine off with the

K button.

^ Switch the washing machine back on

again.

^ Check that there is still detergent in

the detergent drawer. Add detergent,

if necessary.

Select and start a new programme.

Interrupting a programme

Switch the machine off with the

K button.

To continue with the same programme:

Switch the machine back on with the

K button.

Changing a programme

After the start of a programme it is no

longer possible to select a different

programme.

Temperature

It is possible to select a different

temperature up to 5 minutes after the

programme has started.

Press the Temperature button.

Spin speed

It is possible to change the spin speed

up until the final spin begins.

^ Press the Spin speed button.

Extra options

It is possible to select or deselect the

Short and Water plus extra options up

to five minutes after the programme has

started.

A programme cannot be cancelled

or changed if the safety lock has

been activated.

Changing the programme sequence

Adding or removing laundry

after a programme has started

Press the Door button to open the

drum door.

Add or remove items.

Close the drum door.

The programme will continue

automatically.

Please note:

Once a programme has started the

machine cannot recognise any

adjustment to the load.

For this reason, if laundry is added or

removed after the start of a programme,

the machine will always complete the

programme cycle assuming a full load

which can lead to an increase in the

programme duration shown in the

display.

The door cannot be opened, if:

–

the suds temperature is above 55°C.

–

the water is above a certain level.

–

the programme has reached the

Final spin stage.

If you press the Door button when the

above conditions are present, the

following will appear in the display:

: Door locked

Safety lock

The safety lock prevents the machine

from being opened and programmes

from being cancelled during a wash

programme.

To activate the safety lock

Press and hold in the Start/Stop

button after the programme has

started.

Stop or in 3 secs 0

Keep the Start/Stop button pressed in

until the time has elapsed and the

following appears in the display:

Locked 0

The safety lock is now activated. It is

deactivated automatically at the end of

the programme.

To deactivate the safety lock

^ Press and hold in the Start/Stop

button after the programme has

started.

Unlock in 3 secs 0

Keep the Start/Stop button pressed in

until the time has elapsed and the

following appears in the display:

Unlocked 1

Changing the programme sequence

The correct detergent

All modern detergents produced for automatic washing machines are suitable.

Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets

are suitable for full loads, but note that it may be impractical to reduce tablets for

smaller loads. Some tablets do not dissolve as rapidly as others, and may not be

suitable for programmes with short durations.

Do not use biological detergents on silk as the enzymes may damage the silk!

Instructions for use and recommended dosage amounts are given on the

detergent packaging.

See "Optional accessories" at the end of this booklet for details of Miele

branded care products including detergents and fabric conditioner.

Detergent

Universal

detergent

Detergent

for

coloureds

Detergent

for

delicates

Specialist

detergent*

Proofing

agent**

Fabric

conditioner

Minimum iron X X – – – X

Cottons X X – – – X

Delicates X X X – – X

Woollens / –––X–X

Proofing – – – – X –

Express 20

XX– ––X

Automatic plus X X – – – X

Dark garments /

Denim

XXX ––X

Shirts X X – – – X

Intensive plus X X – – – X

Separate rinse/

Starch

–––X–X

Liquid detergent

For programmes with a pre-wash you will need to purchase a special container

from the Miele Spare Parts Department which sits in the main wash

compartment j. Add liquid detergent to this container for the main wash and

to compartment i for the pre-wash

Use powder detergent

* Specialist detergent

Detergent designed specifically for the wash programme or type of fabric.

** Only use proofing agents containing fluorochemical compounds which are

stated by the manufacturer as being "suitable for use on membrane textiles".

Do not use proofing agents which contain paraffin. Add proofing agents to

compartment §.

The right amount to dispense will

depend on the following:

–

The quantity of laundry

–

The soiling level of the laundry

Lightly soiled

No visible dirt or stains. Possibly

slight body odour.

Normally soiled

Visibly dirty and/or just a few slight

stains.

Heavily soiled

Visible dirt and stains and/or dried on

soiling.

– The water hardness level.

Check with your local water supplier

if you do not know the hardness level

in your area.

Water softener

A water softener can be used to cut

down on the use of detergents in hard

water areas. Dispense according to the

amount specified on the packaging.

First add detergent and then the water

softener.

Miele branded water softening tablets

are available from the Miele Spare Parts

Department or via the internet on

www.miele-shop.com.

Use a quantity of detergent as for soft

water.

Washing with several

components

If you wash using several components

(e.g. special application detergents),

we recommend always dispensing the

agents into compartment j in the

following order:

1. Detergent

2. Water softeners

3. Stain remover

This way the agents are distributed

more evenly.

Detergent

Fabric conditioners and liquid

starch

Fabric conditioners

make garments soft to handle and help

prevent static cling when tumble

drying.

Starch

stiffens and gives body to items of

laundry, e.g. shirts, tablecloths and bed

linen.

Automatic dispensing of fabric

conditioner or liquid starch to

laundry at the end of a programme

Add the fabric conditioner or liquid

starch to compartment §. Do not

exceed the maximum level mark.

It will be automatically dispensed in the

last rinse. At the end of the programme

a small amount of water remains in the

fabric conditioner compartment §.

If starching frequently, thoroughly

clean the dispenser compartment,

especially the siphon tube and the

fabric conditioner channel, regularly.

See "Cleaning the detergent

dispenser drawer". Do not use

powder starch formulations or

viscous liquid starch in the §

compartment as it will clog up.

Colour run and dye removers /

dyes

Do not use

colour run or dye

removers in this machine.

^ Dyes suitable for use in domestic

washing machines can be used.

However, please note that the salt

used in the dyeing process can

cause corrosion to stainless steel

components in the machine if you

dye frequently. Always observe the

manufacturer's instructions carefully.

Detergent

A range of Miele branded

CareCollection products are avaialble

to order from Miele. See "Optional

accessories".

Cleaning the drum (Hygiene

info)

Washing at low temperatures and/or

using liquid detergent can cause

bacteria and unpleasant smells to build

up in the machine. In order to clean the

drum and also to prevent unpleasant

smells building up, run a Cottons 75°C

programme with powder detergent

once a month or when the

Hygiene

info

message appears in the display.

External casing and fascia

panel

Disconnect the machine from the

mains electricity supply and

withdraw the plug from the socket

before cleaning the machine.

The machine must not be hosed

down.

Clean the casing with a mild non-

abrasive cleaning agent or soap and

water using a well wrung-out cloth.

Wipe dry with a soft cloth.

Stainless steel surfaces can be

cleaned with a proprietary stainless

steel cleaning agent, following the

manufacturer's instructions on the

packaging.

Do not use solvents, abrasive

cleaners, glass cleaners or multi-

purpose cleaning agents.

These might damage plastic

surfaces and other components

because of the chemicals they

contain.

Cleaning the detergent

dispenser drawer

The pre-wash and main wash

compartments of the detergent

dispensing drawer are self-cleaning.

For hygiene reasons, clean the entire

drawer at regular intervals.

Pull out the detergent dispenser

drawer until a resistance is felt. Press

down the release catch and at the

same time pull the drawer right out of

the machine.

Clean the drawer with warm water.

Cleaning and care

Clean the siphon.

1. Remove the siphon from

compartment § and rinse under

warm running water. Clean the

siphon tube in the same way.

2. Replace the siphon.

If starching frequently, thoroughly

clean the siphon and siphon tube

regularly. A build-up of starch will

cause them to get clogged.

Cleaning the detergent dispenser

drawer housing

^ Use a bottle brush to remove

detergent residues and limescale

from the jets inside the detergent

dispenser drawer housing.

Cleaning and care

Cleaning the water inlet filters

The washing machine has two filters to

protect the inlet valves.

These filters should be checked every

six months or so, or more often if there

are frequent interruptions to the water

supply.

To clean the filter in the union in the

open end of the inlet hose:

First turn off the stopcock.

Unscrew the threaded union

connecting the free end of the inlet

hose to the stopcock.

Remove rubber seal 1 from the

recess.

Using pointed pliers, take hold of

plastic filter bar 2, remove the filter

and clean it.

Put the filter and seal back in the

reverse order and reconnect the

hose.

Turn on the stopcock and check the

connection is watertight. If it leaks,

tighten the connection.

To clean the filter in the water inlet

valve:

Using pliers, carefully loosen the

ribbed plastic nut on the inlet valve

and unscrew.

^ Use pointed nose pliers to withdraw

the plastic filter by the bar (see

illustration). Clean, put back and

secure.

The two filters must be put back in

place after cleaning.

Cleaning and care

With the help of the following notes, minor faults in the performance of the

machine, some of which may result from incorrect operation, can be put right

without contacting the Service Department.

Repair work to electrical appliances should only be carried out by a

suitably qualified person in strict accordance with current local and national

safety regulations. Repairs and other work by unqualified persons could be

dangerous. The manufacturer cannot be held liable for unauthorised work.

The programme does not start

Problem Possible cause Remedy

The display remains

dark, and the Start/

Stop button indicator

light does not come

on.

There is no power to

the machine.

Check whether

– the mains plug is plugged

in and switched on.

– the fuse or circuit breaker

has tripped.

You are asked to enter

a code.

Access via a code has

been activated.

Enter the code and confirm

the entry. Deactivate the code

if you do not wish this

message to appear in the

display the next time the

machine is switched on.

The display is dark. The display has

switched off

automatically to save

energy (Standby

mode).

Press a button. Standby

comes to an end.

Problem solving guide

The following fault messages appear in the display and the

programme stops

Fault message Possible cause Remedy A

;

Drain

fault

–

The water outlet is

blocked or restricted.

–

The drain hose has

been fixed too high.

–

Clean the drain filter and

the drain pump.

–

The maximum delivery head

is1m.

;

Water inlet

fault

The water inlet is blocked

or restricted.

Check whether

–

the stopcock is opened

properly.

–

the inlet hose is kinked.

– the water pressure is too

low.

;

Waterproof

fault

The water protection

system has reacted.

– Close the stopcock.

– Call the Service

Department.

;

Technical

fault

There is a fault. Start the programme again.

If the fault message appears

again, contact the Service

Department.

A To switch off the fault message: Switch the machine off with the K button.

Problem solving guide

The following fault messages appear in the display at the end

of the programme

Fault message Possible cause Remedy

Chk detergent

Excessive foam has built

up during washing.

Use less detergent next time

and follow the manufacturer's

instructions on dosage given on

the packaging.

Hygiene info

A programme using a

temperature above 60°C

has not been run for a

long time.

In order to prevent bacteria and

unpleasant smells building up

in the machine, run a Cottons

75°C programme using powder

detergent.

Problem solving guide

General problems

Problem Possible cause Remedy

The machine shakes

during the spin cycle.

The machine feet are not

level.

Level the machine (see

"Installation and

connection").

The laundry has not been

spun properly and is still

wet.

The machine detected an

imbalance during the final

spin and reduced the

spin speed automatically.

Include both large and

small items in the load as

this will give better

distribution.

The laundry has not spun

satisfactorily.

The spin speed selected

was too low.

Select a higher spin

speed next time.

The pump makes strange

noises.

This is not a fault! These noises occur at the end of a

pump sequence as a normal part of the operation.

There is a lot of

detergent residue in the

detergent drawer.

The water pressure is too

low.

– Clean the water inlet

filter.

– Select Water plus.

Powder detergent used

with water softeners can

be sticky.

Add washing powder

and then add the water

softener.

Fabric conditioner is not

completely dispensed or

too much water remains

in the § compartment.

The siphon tube is not

correctly positioned or is

clogged up.

Clean the siphon, (see

"Cleaning and care -

Cleaning the detergent

dispenser drawer").

The display is in a

different language.

A different language has

been selected in the

Programmable functions

- Language

Set the language you

want. The flag symbol

will guide you.

When laundry is dry, it

feels hard to the touch.

Too vigorous wash action. Programme in gentle

action and more water.

Not enough detergent

used.

Increase detergent dose

to prevent limescale

build-up in laundry.

No fabric conditioner

used

Use fabric conditioner in

last rinse.

Problem solving guide

An unsatisfactory wash result

Problem Possible cause Remedy

Liquid detergent

does not give the

required result.

Liquid detergents usually

contain no bleaching

agents. They do not

remove fruit, coffee and

tea stains.

–

Use a general purpose

detergent containing a

bleaching agent.

–

Add stain removers into

compartment j of the

detergent dispenser drawer

and liquid detergent into a

dispenser ball.

–

Never put stain removers

and liquid detergent together

in the dispenser drawer.

Grey, greasy

particles cling to

washed laundry.

Insufficient amounts of

detergent were used to

break down the particles

of grease in heavily

soiled laundry.

– Use more detergent.

– Before washing the next load

run a Cottons 75°C

programme with powder

detergent but without a load.

White residues

which look like

powder detergent

are seen on dark

textiles after

washing.

The detergent contained

compounds (zeolites) to

aid water softening

which are not soluble in

water. They have ended

up on the laundry.

– Try and brush off the

residues with a soft brush

once the laundry is dry.

–

Wash dark textiles using a

detergent which contains no

zeolites. Liquid detergents

usually contain no zeolites.

–

Use the Dark garments /

Denim programme for dark

coloured laundry.

Problem solving guide

The drum door does not open when you press the Door button

Possible cause Remedy

The machine is not

connected to the

electricity supply and/or is

not switched on.

Insert the plug in the socket and switch on and/or

switch the machine on with the K button.

The safety lock has been

activated.

Deactivate the safety lock as described in

"Changing the programme sequence - Safety

lock".

Access via a code has

been activated.

Deactivate the code as described in

"Programmable functions - Code".

Power cut. Open the drum door as described in the next

section.

The door was not correctly

engaged.

Press hard against the lock side of the drum door

and then press the Door button.

There is still water in the

drum and the machine is

unable to drain.

Clean the drain filter and drain pump as described

in the next section.

For safety reasons the drum door cannot be opened if the suds temperature is

higher than 55°C.

Problem solving guide

Opening the drum door in the

event of a blocked drain outlet

and/or power failure

Switch the washing machine off.

There is a lever behind the detergent

drawer fascia panel.

^ Remove the lever.

Use it to open the access flap.

Blocked drain outlet

If the drain outlet is blocked, up to

25 litres of water will be retained in the

machine.

Caution: if laundry has been

washed at a high temperature, water

draining out of the machine will still

be hot. Danger of scalding!

Procedure for draining the machine

Place a suitable container under the

access flap.

When draining water from the

machine, do not unscrew the drain

filter completely or take it right out.

Slowly and carefully unscrew the

drain filter to let the water out.

If you need to interrupt the flow of

water:

Tighten the drain filter back up again.

Problem solving guide

Once the flow of water ceases:

Remove the drain filter completely.

^ Clean it thoroughly.

Remove any foreign objects (e.g.

buttons, coins, etc.) and fluff from the

filter housing. Turn the impeller by

hand to check that it rotates freely.

Any foreign object causing an

obstruction should be removed.

Put the drain filter back in place and

secure.

Make sure the drain filter is

securely tightened. Otherwise there

is a risk of water leakage during use.

To avoid loss of detergent, pour

approx. 2 litres of water into the

detergent dispenser drawer after

cleaning the drain filter. Excess water

will be pumped out automatically

before the next wash programme.

Opening the drum door

Always make sure that the drum

is stationary before reaching into the

machine to remove laundry.

Reaching into a moving drum is

extremely dangerous.

Pull the emergency release

downwards (see illustration). The

drum door will open.

Problem solving guide

In the event of any faults which you

cannot remedy yourself, please

contact:

–

your Miele Dealer or

–

Miele (see back cover for contact

details).

When contacting your Dealer or Miele,

please quote the model and serial

number of your machine, both of which

are shown on the data plate visible

above the porthole glass when the door

is open.

N.B. A call-out charge will be applied

for service visits where the problem

could have been resolved as

described in these instructions.

Future updates (PC)

The indicator light marked PC is the

interface used by Miele service

technicians during servicing work for

testing purposes and for updating the

machine's programme data.

Guarantee

For information on the appliance

guarantee specific to your country

please contact Miele. See back cover

for contact details.

In the U.K. your appliance is

guaranteed for 2 years from the date of

purchase. However, you must activate

your cover by calling 0845 365 6640 or

registering online at www.miele.co.uk.

Optional spare parts and accessories

for this washing machine are available

from your Miele Dealer, the Miele Spare

Parts Department or via the internet at

www.miele-shop.com.

Please note that telephone calls may

be monitored and recorded for

training purposes.

After sales service

Front view

a Inlet hose (tested to withstand

pressure of at least 7,000 kPa)

b Electricity supply cable

c - f Flexible drain hose (with

detachable swivel elbow)

g Control panel

h Detergent dispenser drawer

i Drum door

j Access to drain filter, drain pump

and emergency release

k Handle recesses for moving the

machine

l Four height adjustable feet

Installation and connection

Rear view

a Protruding lid for holding when

moving the machine

b Electricity supply cable

c Inlet hose (tested to withstand

pressure of at least 7,000 kPa)

d Drain hose

e Transport clip for inlet and drain

hoses

f Safety cap for transit bars

g Transport clip for inlet and drain

hoses and for storing transit bars

when not in use.

Installation and connection

Installation surface

A concrete floor is the most suitable

installation surface for a washing

machine, being far less prone to

vibration during the spin cycle than

wooden floorboards or a carpeted

surface.

Please note:

The machine must be level and

securely positioned.

To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

If installing on a wooden joist floor:

^ We recommend a plywood base (at

least 59x52x3 cm). The base should

span several joists and be bolted to

the joists and not only to the

floorboards. Check for the presence

of pipes and cables first.

If possible, install the machine in a

corner, as this is usually the most stable

part of the floor.

If the machine is installed on a

raised plinth, it has to be secured

against slippage during spin using

retaining clips (available from the

Miele Spare Parts Dept). Otherwise

there is the danger of the machine

moving and falling off the plinth.

Transporting the washing machine to

its installation site

To manoeuvre the machine out of its

packing case to its installation site, hold

it by the edge of the lid where it

protrudes to the rear of the machine as

well as by the handle recesses at the

front.

Ensure that the machine feet and

the floor are dry to prevent the

machine from slipping during the

spin cycle.

Removing the transit bars

To remove the left and right covers

1. Pull on the attached stopper,

2. then use a screwdriver to release the

catch at the top.

Installation and connection

Using the spanner supplied, turn the

left-hand transit bar 90°, then

withdraw the transit bar.

Turn the right-hand transit bar 90°,

then

withdraw the transit bar.

Installation and connection

To avoid the risk of injury the

holes for the transit bars must be

covered after the transit bars have

been removed.

^ Plug the holes with the plastic caps

as illustrated.

Secure the transit bars to the back of

the washing machine. Make sure that

the top catch is located above the

holder.

The machine must not be moved

without the transit bars in place.

Store them as shown or keep them

in a safe place for future use. They

must be re-fitted if the machine is to

be moved again (e.g. when moving

house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the

procedure.

Installation and connection

Levelling the machine

The machine must stand perfectly level

on all four feet to ensure safe and

proper operation.

Incorrect installation may increase

electricity and water consumption and

may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used

to level the machine. All four feet are

screwed in when the machine is

delivered.

Using the spanner supplied turn

counternut 2 in a clockwise direction.

Then turn counternut 2 together with

foot 1 to unscrew.

Use a spirit level to check the

machine is standing level.

^ Hold foot 1 securely with a pipe

wrench. Turn counternut 2 again

using the spanner supplied until it

sits firmly up against the housing.

All four counternuts must be

firmly up against the housing. Please

also check this for the feet which did

not need adjustment. Otherwise

there is the danger of the machine

moving about.

Installation and connection

The fitting of building-under kits*

and stacking kits* must only be

undertaken by qualified and

competent persons, in accordance

with the instructions supplied with

the kit.

Building under a continuous

worktop/in a kitchen run

If you wish to push your machine under

a worktop and there is space to do this

without removing the lid, the

conversion kit is not necessary.

Otherwise the conversion kit is

essential.

– A special building-under conversion

kit* is required.

To ensure electrical safety, the

washing machine lid must be

replaced by the cover plate supplied

with the conversion kit.

– For installation under a work surface

900/910 mm from the floor, a raising

kit* is required.

–

Connections for electricity, water and

drainage should be installed in such

a way that they remain accessible

when the machine is in place.

Fitting instructions are supplied with the

conversion kit.

All parts marked* are available from

your Dealer, the Miele Spare Parts

Department or via the internet at

www.miele-shop.com.

Washer and Dryer stack

A Miele tumble dryer can be stacked

with the washing machine. A "WTV"

stacking kit* is necessary.

Please note:

a Safety distance to wall:

at least 2 cm

b Height:

Stacking kit with pull-out shelf:

approx. 169 cm

Stacking kit without pull-out shelf:

approx. 170 cm

Installation and connection

The Miele water protection

system

The Miele water protection system

protects the washing machine from

water damage.

The system consists of three main

components:

1) the inlet hose

2) the electronic unit and the washing

machine housing

3) the drain hose

1) Inlet hose

The inlet hose can withstand

pressure of more than 7,000 kPa.

2) Electronic unit and washing

machine housing

– Sump

Any leaking water is collected in a

sump in the base of the machine. A

float switches off the safety valves,

preventing any more water flowing

into the machine and water in the

suds container is pumped away.

–

Overflow protection

This prevents the washing machine

taking in too much water. If the water

level exceeds a certain level, the

drain pump switches in and pumps

the excess water away.

3) Drain hose

The drain hose is protected by a

ventilation system which prevents the

washing machine from being

emptied completely.

Installation and connection

Connection to the water

supply

The machine should be connected to a

mains water supply in accordance with

local and national safety regulations.

The German authorities do not require it

to have a non-return valve as the

washing machine has been designed

to comply with DIN regulations.

The machine is designed to operate

with a flow pressure of between

100 kPa and 1,000 kPa. If it is higher

than 1,000 kPa it is essential to fit a

pressure reducing valve.

Connection to the mains water supply

should incorporate a mains stopcock

with

" thread. The stopcock should

be fitted by a qualified plumber.

The connection point is subject

to mains water pressure. Turn on the

stopcock slowly and check for leaks.

Correct the position of the washer

and union if appropriate.

The washing machine is not suitable

for connection to a hot water supply.

Maintenance and care

Only use a genuine Miele hose should

you ever need a replacement or

extension. These are tested to

withstand pressure of at least

7,000 kPa.

In order to protect the water inlet

valve, the two dirt filters - one in the

open end of the inlet hose, one at

the inlet point in the machine - must

not be removed.

Extension hose

–

Longer hoses 2.5 or 4.0 m in length

are available from your Miele dealer

or the Miele Spare Parts Department

as optional extras.

Installation and connection

Connection to the drainage

system

The machine drains via a drain pump

with a delivery head of 1 metre*. The

drain hose must not be kinked as this

restricts drainage. The swivel elbow at

the end of the hose can be turned in

either direction, or can be detached if

required, with a sharp twist and pull.

If required, the drain hose can be

extended to a length of 5 m. The

necessary parts can purchased from

the Miele Spare Parts Department or

your Miele dealer.

* For a delivery head of more than 1 m

(up to a max. of 1.8 m) a replacement

drain pump will need to be fitted.

Please contact the Miele Spare Parts

Department or your Miele Dealer.

Drain hose connection:

1. Direct into a sink or basin:

Please note the following:

–

Hook the hose over the edge and

secure.

–

Make sure that the water can drain

away freely without hindrance.

Otherwise there is a risk of water

overflowing or of some of the drained

water being sucked back into the

machine.

2. Connected securely to a plastic

drain pipe with a rubber nipple.

There is no need to use a non-return

valve.

3. Connected securely to a standpipe.

4. Connected securely to a floor gully.

Please note:

a Adapter

b Nut

c Hose clip

d End of the hose

^ Fit adapter a to the sink drain outlet

using nut b.

^ Attach the end of the hose d to

adapter a.

Use a screwdriver to tighten hose

clip c up close to the nut.

Installation and connection

Electrical connection U.K.

All electrical work should be carried out

by a suitably qualified and competent

person, in strict accordance with

current national and local safety

regulations (BS 7671 in the UK).

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

The appliance is supplied with a mains

cable with moulded plug ready for

connection to a 230-240V mains

supply.

Please ensure the connection data

quoted on the data plate match the

household mains supply.

Connection should be made via a

suitable switched socket which is easily

accessible after installation.

For extra safety it is advisable to protect

the machine with a suitable residual

current device (RCD). Contact a

qualified electrician for advice.

Do not connect via an extension lead.

Extension leads do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

embossed in words on the base of the

plug (as applicable to the design of

plug fitted).

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

WARNING: THIS APPLIANCE

MUST BE EARTHED

Installation and connection

Consumption data

Load Consumption data

Energy Water Duration

in kWh in litres

Cottons 90°C 7.0 kg 2.20 52 2 h 29 min

60°C 7.0 kg 1.33 52 1 h 59 min

60°C 3.5 kg 1.00 45 1 h 59 min

Eco

* 7.0 kg 0.82 52 2 h 59 min

Eco

* 3.5 kg 0.82 45 2 h 59 min

40°C 7.0 kg 0.84 67 2 h 29 min

40°C 3.5 kg 0.73 45 2 h 29 min

Eco

7.0 kg 0.70 52 2 h 59 min

Eco

* 3.5 kg 0.58 45 2 h 59 min

Intensive plus 60°C 7.0 kg 1.65 72 2 h 47 min

Minimum iron 40°C 3.5 kg 0.56 50 1 h 52 min

Delicates 30°C 2.0 kg 0.38 69 59 min

Woollens / 30°C 2.0 kg 0.23 39 39 min

Proofing 40°C 2.5 kg 0.35 12 40 min

Express 20 40°C 3.5 kg 0.32 30 20 min

Automatic plus 40°C 5.0 kg 0.52 62 1 h 29 min

Dark garments / Denim 40°C 3.0 kg 0.60 52 1 h 12 min

Shirts 60°C 2.0 kg 0.95 59 1 h 12 min

Notes for test institutes:

* The test programme conforms to EN 60456 and the energy label with

Directive 1061/2010.

Consumption data can vary from the nominal values given depending on water

pressure, water hardness, water inlet temperature, room temperature, type and

volume of load, fluctuations in the electricity supply and any extra options

selected.

Height 850 mm

Width 595 mm

Depth 615 mm

Depth with door open 975 mm

Height for building under 820 mm

Width for building under 600 mm

Depth for building under 650 mm

Weight 98 kg

Capacity 7 kg dry laundry

Voltage see data plate

Connected load see data plate

Fuse rating see data plate

Consumption data see "Consumption data"

Minimum water flow pressure 100 kPa (1 bar)

Maximum water flow pressure 1000 kPa (10 bar)

Inlet hose length 1.60 m

Drain hose length 1.50 m

Mains connection cable length 1.60 m

Max. delivery head 1.00 m

Maximum drainage length 5.00 m

Test certificates awarded see data plate

Technical data

The programmable functions are

used to alter the machine's

electronics to suit changing

requirements.

Programmable functions can be

altered at any time.

To access programmable functions

The programmable functions are

accessed via the Start/Stop button

and the programme selector.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine door is closed properly.

A Press the Start/Stop button and keep

it pressed in whilst carrying out steps

B to C.

B Press the K button in.

C As soon as...

Language ! ...

. . . appears in the display, release

the Start/Stop button.

To select a programmable function

D Turn the programme selector until

the programmable function you

require appears in the display.

E Press the Start/Stop button to confirm

your selection.

To alter a programmable function

You can see the different options

available for a programmable function

by turning the programme selector.

The option which is currently set will

have a tick L beside it.

F Turn the programme selector until

the option you want appears in the

display.

G Press the Start/Stop button to

activate this option.

To come out of programmable

functions

H Turn the programme selector until

Back

A appears in the display.

I Press the Start/Stop button.

Language !

The display can be set to appear in

one of several different languages.

The flag

! after the word Language acts

as a guide to prevent a language which

will not be understood from being set.

The language selected is saved to

memory.

Programmable functions

Water plus

This programmable function is used

to select the water intake setting for

the Water plus extra option.

There are three different options:

Water +

(the machine is delivered with this

option selected)

The water level is increased in the wash

and rinse stages.

Extra rinse

An extra rinse is introduced.

Water+ & Extra rinse

The water intake is increased in the

wash and rinse stages and an

additional rinse is also introduced.

Gentle action

Activating gentle action reduces the

drum action and is suitable for

washing slightly soiled items more

gently. It should be activated for

garments with a single bar under the

care label and for articles which feel

too hard after they have been dried.

Gentle action can be activated for the

Cottons and the Minimum iron

programmes.

The washing machine is delivered with

the Gentle action setting deactivated.

Suds cooling

When this is activated, additional

water flows into the drum at the end

of the main wash to cool the suds

down. Hot suds can damage plastic

drainage pipes.

Suds cooling takes place when

temperatures of 95°C and 75°C are

selected.

Suds cooling should be activated:

–

to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

–

where the drainage pipes do not

comply with DIN 1986.

The machine is delivered with Suds

cooling deactivated.

Programmable functions

Code

A code can be used to lock the

electronics on the washing machine

to prevent it being used without your

knowledge.

When the code has been activated, you

have to enter a code after switching the

washing machine on. Otherwise the

washing machine cannot be operated.

Code ...

Press the Start/Stop button.

To activate the code

Activate

^ Press the Start/Stop button.

The display will now request that a

code is entered.

To enter the code

The code is 125 and cannot be altered.

O __ __

Turn the programme selector until the

first number appears in the display.

Confirm your selection of the number

by pressing the Start/Stop button.

Repeat the process until all three

numbers have been entered.

125

Press the Start/Stop button.

The following will appear in the display:

Code activated

Once the machine is switched off, it

can only be used again if the code is

entered.

To use the washing machine when

the code is activated

When the machine is switched on

again, the display will request the code.

^ Enter code 125 as described above

and confirm the entry.

The washing machine is now unlocked

and ready for use.

To deactivate the code

Make sure the washing machine is

switched off and the door is properly

closed. Press the Start/Stop button and

keep it pressed in whilst you press the

K button in.

As soon as...

O __ __

. . . appears in the display, release

the Start/Stop button.

Now enter the code and press the

Start/Stop button.

Select Code and confirm Deactivate.

Programmable functions

Temperature unit

You can chose for the temperature to

be displayed in

°C/Celsius or °F/Fahrenheit.

The machine is delivered with

°C/Celsius as the default setting.

Buzzer

When the buzzer function has been

activated, an audible tone sounds at

the end of a programme or when

Rinse hold is reached.

There are two volumes:

Off

(the machine is delivered with this

option selected)

The buzzer is switched off.

Normal

The buzzer sounds at the end of a

programme or when Rinse hold is

reached.

Loud

The buzzer sounds at maximum volume

(Loud) at the end of a programme or

when Rinse hold is reached.

Keypad tone

An audible tone sounds each time a

button is pressed.

The machine is delivered with the

keypad tone deactivated.

Brightness

There are ten different display

brightness settings.

The bar chart shows you the setting.

The machine is delivered with the

display brightness on setting 5.

The brightness will change as soon as

a different setting is chosen.

Contrast

There are ten different display

contrast settings.

The bar chart shows you the setting.

The machine is delivered with the

display contrast on setting 5.

The contrast will change as soon as a

different setting is chosen.

Programmable functions

Standby display

To save energy, the display goes out

and the indicator light for the Start/

Stop button will start flashing slowly.

The display will always go out,

–

if a programme is not selected within

10 minutes of the machine being

switched on.

–

10 minutes after the end of a

programme.

Pressing one of the buttons switches

the display back on again.

You can also choose whether you want

the display to go out 10 minutes after a

programme has started or to remain

visible throughout the programme.

The standby function is switched on.

When this option is selected, the

display will go out 10 minutes after a

programme has started.

Not in current prog.

(the machine is delivered with this

option selected)

The standby function is switched off.

The display will remain visible during a

programme.

Memory

The washing machine will store the

most recently selected settings

(programme, temperature, spin

speed and any extra options) in

memory once the programme has

started.

These settings will appear in the

display the next time the machine is

switched on.

The machine is delivered with the

memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if

laundry is not normally removed

immediately after the end of a

programme.

The drum will turn at intervals for up to

30 minutes after the programme has

finished.

The door can be opened and laundry

removed at any time during the anti-

crease phase.

(the machine is delivered with this

option selected)

Anti-crease is activated.

Off

Anti-crease is deactivated.

Programmable functions

Miele washing machines offer perfect

care for your laundry and feature a

wide range of special programmes

designed to suit the fabric being

washed. Miele have also developed a

range of specialist CareCollection

detergents and conditioning products

to offer you a complete package for

cleaning and caring for your laundry.

The Miele CareCollection detergents

and conditioning products are listed

below. You can order these and many

other useful products via the internet at:

All the products can also be ordered

via the Miele Customer Contact Centre

(see back cover for contact details).

CareCollection

Miele specialist detergents

"Outdoor wear"

This specialist detergent will clean your

water-repellent outerwear with care.

"Sportswear"

The Miele Sportswear detergent is

designed to clean sportswear and

remove odours whilst taking care of the

special microfibres used in these

garments.

"Down Items"

This special-purpose detergent

contains a mild tenside and has been

specially formulated to keep down-filled

items supple and to give them bounce.

Miele proofing agent

This special finishing agent reproofs

garments against wind and water and

provides a dirt-repellent finish whilst

retaining elasticity and breathability.

Optional accessories

"UltraWhite" detergent

This multi-purpose powder detergent

has excellent stain removal properties

and is suitable for white and light

coloured laundry as well as heavily

soiled coloured items.

"UltraColor" detergent for coloured

garments

This liquid detergent is particularly

suitable for cleaning coloured and dark

garments. The special formulation

offers effective stain removal, even at

low temperatures, while helping to

prevent colours fading.

Liquid detergent "For Delicates"

This liquid detergent is ideal for the

gentle treatment of delicate fabrics,

such as wool and silk. Its special

formulation cleans effectively at

temperatures as low as 20°C, while

protecting the colour of your delicate

garments.

Fabric conditioner

The Miele fabric conditioner will give

your laundry a fresh, natural fragrance.

It makes garments soft to handle and

prevents static build-up during tumble

drying.

Optional accessories

Alteration rights reserved/4711/W 5824

M.-Nr. 09 210 550 / 01

probleem met mijn temperatuur ( verwarmte niet meer) Gesteld op 11-10-2021 om 13:16
Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Miele W 5824 bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Miele W 5824 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,15 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Miele W 5824 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Miele W 5824 Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info