711203

Miele TSJ 663 WP Eco Handleiding

67
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
Operating instructions
Heat pump dryer
To avoid the risk of accidents or damage to the appliance it is essen-
tial to read these instructions before it is installed and used for the
first time.
en-GB M.-Nr. 11 663 310
Contents
2
Caring for the environment ............................................................................. 6
Warning and Safety instructions ..................................................................... 7
Operating the tumble dryer .............................................................................. 19
Control panel....................................................................................................... 19
Operating the sensor controls............................................................................. 21
Display................................................................................................................. 21
Examples on how to operate the appliance........................................................ 21
Before using for the first time .......................................................................... 22
Miele@home ........................................................................................................ 22
Wash2Dry ............................................................................................................ 23
Requirements for use ..................................................................................... 23
Downtime after installation.................................................................................. 24
Energy saving tips ............................................................................................. 26
Energy saving tips ............................................................................................... 26
Feedback............................................................................................................. 27
1. Notes on correct laundry care ..................................................................... 28
Points to note regarding washed laundry............................................................ 28
Preparing the laundry before drying.................................................................... 28
Drying .................................................................................................................. 29
Care label symbols ......................................................................................... 29
Select the correct drying level........................................................................ 29
2. Selecting a programme ................................................................................ 30
3. Loading the tumble dryer ............................................................................. 33
Loading the laundry............................................................................................. 33
4. Selecting programme settings..................................................................... 34
Programme settings ............................................................................................ 34
Selecting the drying level for a drying level programme ................................ 34
Other programmes and timed drying programmes........................................ 34
Selecting an extra option..................................................................................... 35
Delay start/SmartStart ................................................................................... 35
5. Starting a programme................................................................................... 37
6. End of programme - unload the drum......................................................... 38
End of programme............................................................................................... 38
Unloading the drum............................................................................................. 38
Contents
3
Programme chart .............................................................................................. 39
Programmes on the control panel ....................................................................... 39
Further programmes............................................................................................ 42
Extras.................................................................................................................. 45
Gentle tumble...................................................................................................... 45
Freshen up........................................................................................................... 45
Anti-crease .......................................................................................................... 45
Buzzer.................................................................................................................. 45
Drying programme overview - Extras.................................................................. 46
Changing the programme sequence .............................................................. 47
Adding or removing laundry ................................................................................ 47
Condensed water container ............................................................................. 48
Emptying the condensed water container .......................................................... 48
Fragrance flacon................................................................................................ 49
FragranceDos ...................................................................................................... 49
Removing the protective seal from the fragrance flacon..................................... 49
Inserting the fragrance flacon.............................................................................. 50
Opening the fragrance flacon.............................................................................. 51
Closing the fragrance flacon ............................................................................... 51
Removing/replacing the fragrance flacon ........................................................... 52
Cleaning and care ............................................................................................. 53
Fluff filters............................................................................................................ 53
Removing the fragrance flacon ...................................................................... 53
Removing visible fluff ..................................................................................... 53
Cleaning the fluff filters and air flow openings thoroughly ............................. 54
Cleaning the fluff filters with water ................................................................. 55
Cleaning the plinth filter....................................................................................... 56
Removing the plinth filter ............................................................................... 56
Cleaning the plinth filter.................................................................................. 57
Cleaning the plinth filter access panel ........................................................... 58
Cleaning the dryer ............................................................................................... 58
Problem solving guide ...................................................................................... 59
The display indicates the following messages or faults...................................... 59
Unsatisfactory drying results............................................................................... 62
The drying cycle duration is very long................................................................. 63
General problems with the tumble dryer ............................................................. 64
Replacing the plinth filter..................................................................................... 65
Reactivating the plinth filter................................................................................. 67
Contents
4
Checking the heat exchanger.............................................................................. 67
Service................................................................................................................ 68
Contact in the event of a fault ............................................................................. 68
Optional accessories........................................................................................... 68
Warranty .............................................................................................................. 68
Installation.......................................................................................................... 69
Front view ............................................................................................................ 69
Rear view............................................................................................................. 70
Transporting the tumble dryer ............................................................................. 70
Transporting the tumble dryer to its installation site ...................................... 70
Installation ........................................................................................................... 71
Levelling the dryer .......................................................................................... 71
Downtime after installation............................................................................. 71
Ventilation....................................................................................................... 71
Before moving the tumble dryer again (e.g. when moving house)................. 71
Additional installation requirements .................................................................... 72
External condensed water outlet......................................................................... 73
Installation conditions requiring a non-return valve ....................................... 73
Arranging the drain hose ................................................................................ 74
Examples........................................................................................................ 74
Changing the door hinging.................................................................................. 76
Changing the hinging over ............................................................................. 76
Refitting .......................................................................................................... 81
Electrical connection .......................................................................................... 82
Technical data.................................................................................................... 83
Data sheet for household tumble driers .............................................................. 84
Conformity declaration........................................................................................ 86
Consumption data............................................................................................. 87
Settings .............................................................................................................. 88
Accessing the settings menu .............................................................................. 88
Language ......................................................................................................... 89
Drying levels ........................................................................................................ 89
Cooling down temp............................................................................................. 89
Welcome tone ..................................................................................................... 89
Keypad tone ........................................................................................................ 90
Buzzer volume..................................................................................................... 90
Airways indicator ................................................................................................. 90
Conductivity ........................................................................................................ 91
Consumption....................................................................................................... 91
Contents
5
Code.................................................................................................................... 92
Brightness ........................................................................................................... 92
Display............................................................................................................ 92
Buttons active ................................................................................................ 92
Buttons inactive.............................................................................................. 92
Disp. switch-off stat. ........................................................................................... 93
Memory ............................................................................................................... 93
Anti-crease .......................................................................................................... 93
Programme info................................................................................................... 94
Miele@home ........................................................................................................ 94
Remote control.................................................................................................... 95
SmartGrid ............................................................................................................ 95
Wash2Dry ............................................................................................................ 96
RemoteUpdate .................................................................................................... 96
Running a RemoteUpdate.............................................................................. 96
Caring for the environment
6
Disposal of the packing mater-
ial
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufactur-
ing process and also reduces the
amount of waste in landfill sites.
Disposing of your old appli-
ance
Electrical and electronic appliances of-
ten contain valuable materials. They
also contain specific materials, com-
pounds and components, which were
essential for their correct function and
safety. These could be hazardous to hu-
man health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local com-
munity waste collection / recycling
centre for electrical and electronic ap-
pliances, or contact your dealer or
Miele for advice. You are also respons-
ible for deleting any personal data that
may be stored on the appliance being
disposed of. Please ensure that your
old appliance poses no risk to children
while being stored prior to disposal.
Warning and Safety instructions
7
It is essential to read these instructions.
This tumble dryer complies with all current local and national
safety requirements. However, inappropriate use can lead to per-
sonal injury and damage to property.
Read the operating instructions carefully before using the tumble
dryer. They contain important information on safety, installation,
use and maintenance. This prevents both personal injury and dam-
age to the tumble dryer.
In accordance with standard IEC60335-1, Miele expressly and
strongly advises that you read and follow the instructions in the
chapter on installing the tumble dryer as well as the safety instruc-
tions and warnings.
Miele cannot be held liable for damage caused by non-compliance
with these instructions.
Keep these operating instructions in a safe place and pass them
on to any future owner.
Correct application
This tumble dryer is intended for use in domestic households and
similar working and residential environments.
This tumble dryer is not intended for outdoor use.
It must be used only as a domestic appliance to dry items which
have been washed in a water solution and which are marked on the
manufacturer's care label as being suitable for tumble drying. If us-
ing dry cleaning kits, do so at your own risk, and follow the instruc-
tions provided on the packaging.
Any other applications may be dangerous. Miele cannot be held li-
able for damage resulting from incorrect or improper use or opera-
tion.
Warning and Safety instructions
8
This tumble dryer can only be used by people with reduced phys-
ical, sensory or mental capabilities, or lack of experience or know-
ledge, if they are supervised whilst using it or have been shown how
to use it in a safe way and understand and recognise the con-
sequences of incorrect operation.
Safety with children
Children under 8 years of age must be kept away from the tumble
dryer unless they are constantly supervised.
Children 8 years and older may only use the tumble dryer unsu-
pervised if they have been shown how to use it safely and recognise
and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the tumble
dryer unsupervised.
Please supervise children in the vicinity of the tumble dryer and do
not let them play with it.
Warning and Safety instructions
9
Technical safety
Please observe the instructions in “Installation” and the “Technical
data”.
Before setting up the tumble dryer, check it for any externally vis-
ible damage.
Do not install or use a damaged tumble dryer.
Before connecting the tumble dryer, ensure that the connection
data on the data plate (fuse rating, voltage and frequency) match the
mains electricity supply. If in any doubt, consult a qualified electri-
cian.
Reliable and safe operation of this tumble dryer can only be as-
sured if it has been connected to the mains electricity supply.
The electrical safety of this tumble dryer can only be guaranteed
when correctly earthed. It is essential that this standard safety re-
quirement is met. If in any doubt, please have the household wiring
system tested by a qualified electrician. Miele cannot be held liable
for the consequences of an inadequate earthing system (e.g. electric
shock).
Do not connect the appliance to the mains electricity supply by an
extension lead, multi-socket adapter or similar. These can overheat
and are a fire hazard.
Warning and Safety instructions
10
Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. The manufacturer can only guarantee the safety of
the appliance when Miele replacement parts are used.
Unauthorised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the warranty.
The accessibility of the plug must always be ensured, in order to
disconnect the tumble dryer from the mains.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
The tumble dryer must be isolated from the electricity supply in
the event of a fault and during cleaning and maintenance.
Warning and Safety instructions
11
Heat pump technology and refrigerant:
this tumble dryer uses a gaseous refrigerant which is condensed by
the compressor. The refrigerant, which is brought to a higher temper-
ature level and liquefied by condensing, is led in a closed circuit
through the heat exchanger unit where heat exchange with the circu-
lating drying air takes place.
Damage to the tumble dryer by switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer wait for at least one hour before
switching it on.
- The humming noises caused by the heat pump during the drying
process are normal. They do not impair the efficient functioning of
the dryer.
- The refrigerant is not flammable or explosive.
- This tumble dryer contains fluorinated greenhouse gases. Her-
metically sealed.
Designation of refrigerant R134a R134a R450A
Refrigerant quantity 0.48kg 0.30kg 0.31kg
Ozone-depletion potential of
refrigerant
1430kg CO2 e 1430kg CO2 e 605kg CO2 e
Ozone-depletion potential of
appliance
686kg CO2 e 429kg CO2 e 188kg CO2 e
The designation and quantity of refrigerant that apply to this tumble dryer, and
the ozone-depletion potential, can be found on the data plate (at the back of the
tumble dryer).
Warning and Safety instructions
12
Do not block the gap between the bottom of the tumble dryer and
the floor with plinth facings, deep pile carpet etc. This would hinder a
sufficient flow of air to the dryer.
Make sure the dryer door can be opened without hindrance after
installation.
This tumble dryer must not be used in a non-stationary location
(e.g. on a ship).
Do not make any alterations to the tumble dryer, unless authorised
to do so by Miele.
This tumble dryer is supplied with a special lamp to cope with
particular conditions (e.g. temperature, moisture, chemical resist-
ance, abrasion resistance and vibration). This special lamp must only
be used for the purpose it is intended for. It is not suitable for room
lighting. Replacement lamps may only be fitted by a Miele authorised
person or the Miele Service Department.
Warning and Safety instructions
13
Correct use
Do not install the tumble dryer in a room where there is a risk of
frost occurring. At temperatures around freezing point the tumble
dryer may not be able to operate properly. There is a risk of damage
if the condensed water is allowed to freeze in the pump and hoses.
The maximum load for this tumble dryer is 9.0 kg (dry weight).
The maximum recommended loads for individual programmes are
given in the Programme chart.
To prevent the risk of fire, do not connect the tumble dryer via a
controllable socket (e.g. a timer or a peak-load switch-off device).
If the drying programme is interrupted before the end of the cooling
down phase, this could cause the laundry to self-ignite.
Warning: Do not switch the dryer off before the drying pro-
gramme has finished. If this is done, the laundry must be hung up or
spread out to cool it down.
In many programmes, the heating phase is followed by a cooling
down phase to ensure that the items are not too hot to handle when
you remove them (this also avoids the danger of the laundry self-ig-
niting). The programme is not finished until the cooling down phase
has been completed.
As soon as the programme has finished, remove all laundry from the
drum.
Warning and Safety instructions
14
To prevent the risk of fire, the following textiles must not be dried
in this tumble dryer:
- Items which have not been washed.
- Items, such as workwear, which have not been thoroughly
cleaned and which are still soiled with grease, oil or other depos-
its (such as cosmetics, lotions etc). If items have not been thor-
oughly cleaned there is a danger that these might ignite when
heated, even after they have been removed from the dryer at the
end of the programme.
- Items (e.g. mops and floor cloths) which have been treated with
inflammable cleaning agents or which contain residues of acet-
one, alcohol, benzene, petrol, kerosene, stain remover, turpentine,
wax and wax remover or other chemicals.
- Items which have been splashed with hair lacquer, hair spray, nail
varnish remover or similar substances.
When washing such heavily soiled items ensure that you use suffi-
cient detergent and select a high temperature. If in doubt, wash
the items several times.
Remove all items from pockets (e.g. lighters, matches).
Warning and Safety instructions
15
To prevent the risk of fire, the following textiles must not be dried
in this tumble dryer:
- Items which have been cleaned using chemicals (e.g. professional
dry-cleaning agents).
- Items which contain a large proportion of rubber, foam rubber or
rubber-like materials. For example, products made from latex
foam rubber, shower caps, waterproof textiles, rubberised articles
and items of clothing and pillows with foam rubber filling.
- Damaged items which contain padding or fillings (e.g. pillows,
jackets). When damaged, the filling can get out with the risk of it
igniting in the dryer.
Always close the door after use. This way you will avoid the
danger of:
- Children climbing onto or into the dryer or hiding things in it.
- Pets or other small animals climbing into it.
Do not let anyone sit or lean on the door, as this can cause the
tumble dryer to tip up.
The fluff filters must be cleaned after every drying cycle.
The fluff filters or the plinth filter must be thoroughly dried after
cleaning. Wet fluff/plinth filters could cause operational faults while
drying.
Warning and Safety instructions
16
The tumble dryer must not be used without fluff filters or
- with damaged fluff filters, or
- with a damaged plinth filter.
This would cause an excessive build-up of fluff which in turn would
cause a fault.
If the water is drained externally through the drain hose instead of
being collected in the condensed water container, make sure the
drain hose is securely attached if you hang it in a sink or basin to
avoid the hose slipping and the water causing damage.
Condensed water is not drinking water.
It can cause health problems in both people and animals if con-
sumed.
Always keep the area around the tumble dryer free of dust and
fluff.
Dust drawn into the tumble dryer can cause blockages in the heat
exchanger over time.
The tumble dryer must not be hosed down.
Fabric conditioner and similar products must be used according
to the instructions on the manufacturer's packaging.
Warning and Safety instructions
17
Using a fragrance flacon (optional accessory)
Only use genuine Miele original fragrance flacons.
The fragrance flacon must be stored in its packaging so please
make sure you retain this.
Caution. The fragrance can leak out of the flacon. Make sure that
you always keep the flacon, or the fluff filter with the flacon inserted
in it, in a horizontal position when carrying and do not tip or place
down on any surface.
Use an absorbent cloth to wipe up any fragrance which has
leaked out of the flacon onto the floor, the dryer or any dryer com-
ponents (e.g. the fluff filter) immediately.
If fragrance which has leaked out of a flacon: comes into contact
with the skin - wash the skin thoroughly with soap and water; comes
in contact with the eyes - rinse the eyes with clean water for at least
15minutes; is swallowed - rinse out the mouth thoroughly with
clean water. Seek medical advice in the case of contact with the
eyes or if fragrance has been swallowed.
If fragrance which has leaked out of a flacon comes in contact
with clothing, change the clothing immediately. Wash the clothing or
any cloths used for mopping up fragrance thoroughly with plenty of
water and detergent.
There is the risk of fire or damage to the tumble dryer if the follow-
ing instructions are not observed:
- Never refill a flacon with fragrance.
- Never use a faulty fragrance flacon.
Dispose of an empty fragrance flacon with the household waste
and never use it for any other purpose.
Please also observe the information supplied with the fragrance
flacon.
Warning and Safety instructions
18
Accessories
Only use genuine Miele original spare parts and accessories with
this appliance. If non-Miele parts are used, warranty, performance
and product liability claims will be invalidated.
The tumble dryer can be combined with a Miele washing machine
in a washer-dryer stack. The appropriate “WTV” stacking kit (avail-
able to order) to match your tumble dryer and washing machine is
required.
If you order a plinth for this tumble dryer (available from Miele as
an optional accessory - depending on country), make sure it is the
correct one.
Miele cannot be held liable for damage caused by non-compli-
ance with these Warning and Safety instructions.
Operating the tumble dryer
19
Control panel
aControl field
The control field consists of a dis-
play and various sensor controls.
The individual sensors are explained
in the following sections.
bDisplay
The following values are shown on
the display and/or selected from it:
1. The programme names, the drying
level, and the duration of the se-
lected programme.
2. The individual values for selected
extras and settings.
cSensor controls 
Values shown in the display can be
changed with the  sensors. The
sensor increases the value or
moves up the list; the sensor de-
creases the value or moves down
the list.
dOK sensor
The OK sensor is used for confirm-
ing selected values.
ePerfect Dry indicator
With programmes with a selectable
drying level, the Perfect Dry system
calculates the residual moisture
present in the laundry to ensure a
precise drying result.
The Perfect Dry indicator . . .
. . . flashes after the programme has
started and switches off when the
programme duration is displayed.
. . . lights up again when the selec-
ted drying level is reached towards
the end of the programme.
. . . remains dark with the following
programmes: Woollens handcare,
Silks handcare, Cool air, Warm air,
Basket programme.
Operating the tumble dryer
20
fOptical interface
This is used by the Service depart-
ment as a transmission point.
gSensors for extra options
You can select extra options to aug-
ment drying programmes.
If a drying programme has been se-
lected, the sensor controls for the
possible extra options light up dimly.
hsensor
You can use the sensor to call up
an energy consumption forecast for
the selected drying programme.
See “Washing environmentally and
economically”, section
“EcoFeedback” for more informa-
tion.
i sensors
The sensor starts the delay start
function. With the delay start func-
tion, you can choose when you want
the programme to start. The start of
the programme can be delayed from
15minutes up to a maximum of 24
hours. This allows you to make use
of night-time economy electricity
rates, for example.
For further information see “4. Se-
lecting programme settings”
jStart/Add laundry sensor control
Touching the Start/Add laun-
drysensor control starts a pro-
gramme. The current programme
can be interrupted to add laundry.
The programme can be started when
the sensor control is flashing on and
off. The sensor control lights up con-
stantly once the programme has
started.
kProgramme selector
This is used for selecting pro-
grammes and for switching off. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to the position.
Under Further programmes/ you
will find:
– The Wash2Dry function as well as
additional programmes
– The option to change Settings
Operating the tumble dryer
21
Operating the sensor controls
The sensor controls react to fingertip
contact. Selection is possible as long
as the respective sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means: se-
lection possible
Display
The basic display shows the following
for a drying level programme:
OK
Normal 0:55
- The selected drying level and the ex-
pected programme duration.
- The drying level reached after the
start of the programme and the re-
maining programme duration.
The basic display shows only the pro-
gramme duration for a time-controlled
programme:
OK
2:00
Examples on how to operate
the appliance
Scrolling through a list
The scroll bar in the display indicates
that a list of choices is available.
OK
Language 
Touching the sensor scrolls down the
list to the next option and touching the
sensor scrolls up the list to the next
option. The OK sensor is used to activ-
ate the option shown in the display.
Identifying the selected option
OK
On
An activated option in a list will have a
tick next to it.
Setting numerical values
OK
:0000
Start in h
The numerical value is highlighted in
white. Touching the sensor de-
creases the value. Touching the
sensor increases the value. The OK
sensor is used to activate the value
shown in the display.
Leaving a submenu
Select Back  to exit a submenu.
Before using for the first time
22
Miele@home
Your tumble dryer is equipped with an
integrated WiFi module.
In order to use it you need:
- a WiFi network
- the Miele app
- a Miele user account. The user ac-
count can be created via the Miele
app.
The Miele app will guide you as you
connect your tumble dryer to your
home WiFi network.
Once your tumble dryer is connected to
your WiFi network you can use the app,
for example, to carry the following
activities:
- Controlling your tumble dryer re-
motely
- Calling up information on the operat-
ing status of your tumble dryer
- Calling up information on the pro-
gramme sequence of your tumble
dryer
Connecting your tumble dryer to your
WiFi network will increase energy con-
sumption, even when the tumble dryer
is switched off.
Before installing the tumble dryer in
its final location, ensure the signal
strength is sufficient for your WiFi
network.
Availability of the WiFi connection
The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control
toys). This can give rise to sporadic or
even complete connection failures.
Therefore, the availability of featured
functions cannot be guaranteed.
Miele@home availability
The ability to use the Miele app de-
pends on the availability of the
Miele@home service in your country.
The Miele@home service is not avail-
able in every country.
For information about availability,
please visit www.miele.com.
Miele App
The Miele App is available to download
free of charge from the Apple App
Store® or from the Google Play Store™.
Before using for the first time
23
Wash2Dry
Function
Once the programme has come to a
proper end, the Miele washing ma-
chine transfers the programme data
via the router to which the networked
tumble dryer is also connected, as
well as transferring it to the Miele
Cloud.
The tumble dryer automatically sets a
drying programme tailored to the laun-
dry based on the transferred pro-
gramme data.
All you need to do is start the drying
programme once you have loaded the
tumble dryer. No further programme
settings are required on the tumble
dryer.
The drying programme must be star-
ted within 24 hours of the end of the
wash programme. The data will be
kept available for the tumble dryer
during this period, but will be overwrit-
ten when a new wash programme
ends.
Tip: Do not disconnect the tumble dryer
from the network. The programme data
transferred by the washing machine will
be received by the tumble dryer as
soon as you select Wash2Dry.
If you have disconnected the appliance
from the network beforehand, this will
cause a delay in receiving the data.
Requirements for use
In order to use the Wash2Dry function,
the Miele washing machine and
tumble dryer must be networked using
Miele@home services.
Tip: Set up Miele@home as described
in “Before using for the first time”.
Before using for the first time
24
Downtime after installation
Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer wait
for at least one hour before switching
it on.
Removing the protective foil
and stickers
Remove:
- Any protective film from the door
- Any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Switching on the tumble dryer
Turn the programme selector to the
Cottons programme.
The welcome tone will sound and the
welcome screen will light up.
Setting the language
You will be asked to select the language
you require for the display. It is possible
to change the language at any time by
setting the programme selector to the
Further programmes/ position in the
Settings  sub-menu.
OK
deutsch
Touch the  sensor until the lan-
guage you want appears in the dis-
play.
Confirm your selection of the lan-
guage by touching the OK sensor.
Before using for the first time
25
Setting up Miele@home
The following message appears in the
display:
Miele@home
Touch the OKsensor control.
OK
Set up now
To set up Miele@home now:
Touch the OK sensor control.
To postpone setup until later:
Touch the sensor control until Set
up later appears in the display and
press OK to confirm.
The following selection options appear
in the display:
1. Connect via WPS
2. Connect via App
Select the required connection type.
You will then be guided by the display
and the Miele app.
Before installing the tumble dryer in
its final location, check that the sig-
nal strength from your WiFi network
is sufficient.
You will require a WPS-compatible
router for the Connect via WPSconnec-
tion type.
Activate the WPS function on your
router within 2minutes.
If the connection is successful, the fol-
lowing will appear in the display:
OK
Connection OK
Confirm with OK.
Continue with setting up
Confirm with the OK sensor.
See “1. Notes on correct laundry
care”.
You can then select a programme
and load the tumble dryer as de-
scribed in “2. Selecting a pro-
gramme” and “3. Loading the tumble
dryer”.
The procedure for using for the first
time is completed when a programme
lasting longer than one hour has been
carried out in full.
Energy saving tips
26
Energy saving tips
This dryer with heat-pump technology
is designed for energy-saving drying
cycles. However, you can save a little
more energy with the following meas-
ures as the drying time is not exten-
ded unnecessarily.
- Make sure your laundry is spun at the
maximum spin speed before drying.
The higher the spin speed, the
greater the savings that can be made
in energy and time during drying, e.g.
approx. 20% energy can be saved if
spun at 1600rpm instead of
1000rpm.
- Load according to the optimum
amount of laundry recommended for
the programme being used. This will
mean that the energy consumption
for the amount of laundry is at its
most economical.
- Make sure that the room temperature
is not too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
- Clean the fluff filters in the door open-
ing after every drying cycle.
Please refer to “Cleaning and care” for
information on cleaning the fluff filters
and the plinth filter.
- If possible, make use of time-vari-
able, low-cost electricity tariffs. Ask
your energy supplier for information.
Your tumble dryer's delay start func-
tion will be useful as you can select
when during the next 24 hours you
want drying to start automatically.
Energy saving tips
27
Feedback
You can view information about the en-
ergy consumption of your tumble dryer
with the sensor.
The following information will appear in
the display:
- An estimate of the energy consump-
tion before the programme begins.
- The actual energy consumption dur-
ing the programme or at the end of
the programme.
1. Viewing the estimated consump-
tion
After selecting a drying programme,
touch the sensor.
The estimated energy consumption
level will be displayed as a bar chart.
OK
 
The more bars visible (), the higher the
energy consumption.
The estimate will vary depending on the
drying programme, temperature and
any options selected.
Touch the OK sensor or wait until the
display automatically returns to the
standard display.
2. Viewing the actual consumption
The actual energy consumption can be
viewed during the programme or at the
end of the programme.
Touch the sensor.
OK
Energy < 0.1 kWh
The consumption will alter as the pro-
gramme progresses.
It is also possible to view the soiling
level of the filter as a % at the end of
the programme before you open the
door.
Touch the sensor to switch to the
Filter display.
0% = lightly soiled, 50% = average
soiling, 100% = heavily soiled.
Increased soiling will cause the pro-
gramme duration to increase which in
turn will increase energy consumption.
If the door is opened or the appli-
ance has switched off automatically
at the end of the programme, the
data will revert to the estimated con-
sumption.
Tip: You can view the consumption
data for the last drying programme in
Settings under Consumption.
1. Notes on correct laundry care
28
Points to note regarding
washed laundry
- When washing very heavily soiled
items ensure that you use sufficient
detergent and select a high temperat-
ure. If in doubt, wash the items sev-
eral times.
- Do not put soaking wet items into the
tumble dryer. Make sure your laundry
is thoroughly spun before drying. The
higher the spin speed, the greater the
savings that can be made in energy
and time during drying.
- New dark coloured garments should
be washed and dried separately from
light coloured garments to avoid the
danger of colours running and discol-
ouring other garments or even plastic
components in the dryer. Dark col-
oured fibres can also settle on light
coloured garments and vice versa.
- Starched laundry can be dried in the
tumble dryer. To achieve the usual
finish, double the amount of starch
should be used.
Preparing the laundry before
drying
Damage due to foreign objects
which were not removed from the
laundry.
Foreign objects can melt, burn, or
explode.
Ensure that any foreign objects, e.g.
detergent dispensing balls, lighters,
etc. have been removed from the
laundry.
Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the dryer and the surroundings.
See “Warning and Safety” instruc-
tions for further information.
- Sort the laundry according to the type
of fibre and weave, size, garment
care label symbol and the drying level
required.
- Check seams and stitching to ensure
that padding and linings are intact.
This way you will avoid the danger of
fillings coming out. These could catch
fire when being dried.
- Disentangle the laundry.
- Tie together textile belts and ties.
- Fasten duvet covers and pillow cases
to prevent small items from being
rolled up inside them.
- Fasten hooks and eyes.
- Leave jackets open and undo any
long zips so that textiles dry evenly.
- Sew in or remove underwiring from
bras.
- If necessary, reduce the size of the
load for these types of fabric. Easy
care fabric tends to crease more, the
larger the load. This is particularly the
case for garments made from very
fine weave fabric, such as shirts or
blouses.
1. Notes on correct laundry care
29
Drying
Tip: See the “Programme chart”.
It lists all programmes and their max-
imum load.
- Always observe the maximum recom-
mended load for each programme.
This will mean that the energy con-
sumption for the amount of laundry is
at its most economical.
- Down-filled garments have linings
which have a tendency to shrink, de-
pending on the quality of the item.
Only use the Pre-ironing programme
for these textiles.
- Pure linen should only be tumble
dried if it is specified as suitable on
the care label. The surface of the fab-
ric may otherwise become rough.
Only use the Pre-ironing programme
for these textiles.
- Woollens and wool blends are sus-
ceptible to becoming matted or
shrinking. Only use the Woollens
handcare programme for these tex-
tiles.
- Jersey fabrics (e.g. T-shirts, under-
wear) tend to shrink when they are
washed for the first time. Do not
overdry these fabrics to prevent fur-
ther shrinking. Buy jersey garments
that are one or two sizes bigger.
- With fabrics that are particularly heat-
sensitive or susceptible to creasing,
reduce the drying load and select
Gentle tumble.
Care label symbols
Drying
Normal/higher temperature
Low temperature*
* Select Gentle tumble
Do not tumble dry
Ironing
Hot iron
Cool iron
Warm iron
Do not iron
Select the correct drying level
-Extra dry for hard wearing and very
thick fabrics.
-Normal + if you want to fold the laun-
dry after drying and put it away.
-Normal for textiles that can shrink. Or
for light cotton or jersey textiles.
-Slightly dry for particularly delicate
garments that you wish to line dry af-
terwards.
-Hand iron/ or Machine iron if you
want to iron the laundry after drying.
2. Selecting a programme
30
Switching on the tumble dryer
The dryer is switched on by selecting a
programme, and switched off by turning
the programme selector to the posi-
tion.
Turn the programme selector to a
programme.
When a programme is selected, the
programme name and the maximum
load (weight of dry laundry) possible
for the programme will appear in the
display for a few seconds.
Selecting a programme
There are three possible ways to select
a programme:
1. Selecting standard programmes
with the programme selector
Turn the programme selector to the
required programme.
The selected programme will be shown
in the display. The standard display will
then reappear.
2. Selecting a programme
31
2. Selecting programmes via the
“Further programmes/” setting and
the display
Turn the programme selector.
You can select the programme you
want via the display.
Touch the sensor controls until
the programme you want appears in
the display.
OK
Warm air
Confirm the programme with the OK
sensor control.
The selected programme will be shown
in the display. The standard display will
then reappear.
Selecting the Wash2Dry function
OK
Wash2Dry
Confirm the function with the OK
sensor control.
Please wait lights up in the display of
the tumble dryer while the wash pro-
gramme is running.
Once the washing machine programme
has come to a proper end, the drying
programme tailored to the laundry will
be displayed.
Once the wash cycle has ended,
place the clean laundry in the tumble
dryer.
To start the programme, all you need
to do is press the Start/Add laundry
sensor control on the tumble dryer.
Programme selection will not be avail-
able on this tumble dryer after wash-
ing delicate textiles (e.g. curtains) in
special wash programmes.
2. Selecting a programme
32
3. Selecting programmes via the Mo-
bileStartprogramme selector pos-
ition and the Miele@mobile app
Tip: In order to use MobileStart, the
tumble dryer must be logged on to the
WiFi network and Remote control must
be switched on.
Turn the programme selector.
Follow the instructions in the display.
Touch the Start/Add laundry sensor
control.
The tumble dryer can now be operated
via a mobile device together with the
Miele@mobile app.
3. Loading the tumble dryer
33
Loading the laundry
Preventing textile damage.
Before loading, read chapter “1.
Notes on correct laundry care”.
Check that the drum is empty. Re-
move any items that might be block-
ing the drum.
Unfold the laundry and load loosely
into the drum.
Do not overload the drum. Overload-
ing can cause unnecessary wear and
tear to the laundry and give a disap-
pointing drying result. It can also
cause more creasing.
This can result in damage to the
laundry.
When closing the door, make sure
that laundry does not get trapped in
the door opening.
2 positions for inserting fragrance
flacons
The “Fragrance flacon” chapter de-
scribes how to use the fragrance
flacon.
If you are not using a fragrance flacon:
push the tab down completely (see ar-
row) so that the socket is closed. Oth-
erwise, lint will accumulate here.
Close the door
Shut the door with a gentle swing.
4. Selecting programme settings
34
Programme settings
Selecting the drying level for a drying
level programme
Cottons, Minimum iron, Delicates, Pre-
ironing, Shirts, Express, Denim, Outer-
wear, Sportswear, Bed linen, Automatic
plus
The pre-set drying level for the pro-
gramme can be changed if required.
OK
Normal 0:55
Touch the or sensors to select a
drying level.
Any drying level can be selected for the
Cottons, Express, and Bed linen pro-
grammes. A more limited range is avail-
able when using the other programmes.
Other programmes and timed drying
programmes
Warm air, Cool air, Basket programme,
DryFresh
You can change the duration in 10-
minute increments.
Cool air: 20min – 1:00h
Warm air: 20min – 2:00h
Basket programme: 40min – 2:30h
DryFresh: 1:00–2:00h
OK
2:00
Touch the or sensor controls to
select a duration.
Cottons, Woollens handcare, Pil-
lows, Proofing, Silks handcare
The drying result is preset by the dryer
and cannot be altered.
4. Selecting programme settings
35
Selecting an extra option
Anti-crease
Gentle tumble
Buzzer
Freshen up
Touch a sensor control to select the
desired extra option.
The relevant sensor control will light up
brightly.
Freshen up and Gentle tumble cannot
be combined, see “Extra options” for
other notes.
Delay start/SmartStart
Delay start
With the delay start function, you can
choose when you want the pro-
gramme to start.
This function is active when the
SmartGrid is switched off.
The hours can be set from 00 to 24.
The minutes can be set in 15 minute in-
crements from 00 to 45.
Setting the delay start time
Touch the sensor.
The following will appear in the display:
OK
:0000
Start in h
Set the hours with the  sensors.
Confirm with the OK sensor.
The display will change:
OK
4506:
Start in h
Set the minutes with the  sensors.
Confirm with the OK sensor.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on the or sensor con-
trol.
Altering Delay start
The selected delay start time can be
changed before the programme start.
Touch the sensor.
Change the specified time and con-
firm with the OK sensor.
Cancelling delay start
The selected delay start time can be
cancelled before the programme starts.
Touch the sensor.
The selected delay start time will ap-
pear in the display.
Set a time value of 0:00 h with the
 sensors. Confirm with the OK
sensor.
4. Selecting programme settings
36
The selected delay start time has been
cancelled.
After the programme has started, the
selected delay start time can only be
changed or cancelled by interrupting
the programme.
Adding laundry during ongoing delay
start period
Follow the description in “Changing
the programme sequence – Adding or
removing laundry”.
SmartStart
The SmartStart function lets you
define a time period during which your
tumble dryer will start automatically.
The appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity tariff
is particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
15minutes and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying pro-
gramme.
Setting the timeframe
If you have activated the SmartGrid
function in Settings, SmartStart in in-
stead of Start in will appear in the dis-
play when you touch the sensor
control (see “Settings – SmartGrid”).
The procedure for setting this is the
same as for setting the time for Delay
start.
Use the sensor controls to enter
the hour and confirm your entry with
the OK sensor control.
The hour will be saved and the minute
number block will be highlighted.
Use the sensor controls to enter
the minutes and confirm your entry
with the OK sensor control.
Press the Start/Add laundry sensor
control to start the drying programme
with SmartStart.
The following will appear in the display:
OK
SmartStart
5. Starting a programme
37
Starting the programme
Touch the flashing Start/Add laundry
sensor control.
The Start/Add laundry sensor control
will light up and Drying appears in the
display.
Notes
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the pro-
gramme has started the programme
duration will appear in the time display.
With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
- The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
“Operating the tumble dryer”).
- The dryer measures the residual
moisture of the laundry and calcu-
lates the required programme dura-
tion.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
To prevent laundry wearing out
avoid overdrying it.
The drying level reached for the selec-
ted drying level programme will light up
in the display.
You can view the selected drying level
or time again:
Touch the  or sensor.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10minutes, the indicators dim.
The Start/Add laundry sensor control
flashes slowly.
Touch the Start/Add laundry sensor
control to switch the indicators on
again (this does not have any effect
on a running programme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the
programme has started.
Follow the description in “Changing
the programme sequence – Adding or
removing laundry”.
6. End of programme - unload the drum
38
End of programme
The programme is finished when Finish/
Anti-crease or Finished appears in the
display. The Start/Add laundry control
light goes out.
The tumble dryer will switch off auto-
matically 15minutes after the end of the
Anti-crease phase (with programmes
without an Anti-crease phase it will
switch off 15minutes after the end of
the programme).
Unloading the drum
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Pull the door open at the side with
the orange marker.
Remove the laundry.
Items left in the dryer could be dam-
aged by overdrying when the dryer is
used the next time.
Always remove all items from the
drum.
Turn the programme selector to the
position.
Remove the fluff from the 2 fluff filters
in the door opening: see “Cleaning
and care - Fluff filters”.
Shut the door with a gentle swing.
Empty the condensed water con-
tainer.
We recommend that you drain the con-
densed water externally through the
drain hose when drying a full load using
the Cottons and Cottons pro-
grammes. This will avoid having to
empty the condensed water container
during the programme.
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting switches off automat-
ically (energy saving).
Programme chart
39
All weights marked with * are based on the weight of dry laundry.
Programmes on the control panel
Cottons max.9kg*
Use for Cotton items such as those described under Cottons Normal with
normal residual moisture.
Note - Items are dried to a Normal level only in this programme.
- The Cottons programme is the most energy-efficient for dry-
ing cotton items with normal residual moisture levels.
Note for
test insti-
tutes
- The Cottons programme is the test programme in accord-
ance with Regulation 392/2012/EU for energy labelling, measured
in accordance with EN61121.
- With the Cottons and Cottons programme settings, drain the
condensed water externally through the drain hose.
Cottons max.9kg*
Extra dry, Normal +, Normal, Slightly dry
Use for Single and multi-layered cotton items. For example, T-shirts, under-
wear, baby clothes, workwear, jackets, covers, aprons, overalls,
hand towels, bath towels, bathrobes, and flannelette/bed linen.
Tip - Select Extra dry for multi-layered and very thick fabrics.
- Do not use Extra dry for jersey fabrics (e.g. T-shirts, underwear,
baby clothes) because they can shrink.
Hand iron, Hand iron, Machine iron
Use for All cotton or linen fabrics requiring further processing. For example,
table linen, bed linen, or starched laundry.
Tip To prevent laundry from drying out, it should be rolled up until you
are ready for ironing.
Minimum iron max.4kg*
Normal +, Normal, Slightly dry, Hand iron, Hand iron
Use for For easy care items made of cotton, synthetic, or mixed fibre. For
example, workwear, overalls, pullovers, dresses, trousers and table
linen.
Programme chart
40
Delicates max.2.5kg*
Normal +, Normal, Slightly dry, Hand iron, Hand iron
Use for Delicate items with the symbol on the care label made of syn-
thetic fibre, mixed fibre, rayon, and easy care cotton. For example,
shirts, blouses, lingerie, and appliquéd garments.
Tip The load should be reduced further for a particularly crease-free dry-
ing process.
Woollens handcare max.2kg*
Use for Woollen garments and fabric containing wool blends, e.g. pullovers,
cardigans, tights.
Note - Wool and wool blend items are only fluffed up; they are not dried
completely.
- Remove the garments as soon as the programme has finished.
Shirts max.2kg*
Normal +, Normal, Slightly dry, Hand iron, Hand iron
Use for All shirts and blouses.
MobileStart
The Miele app is used for selecting programmes and operating the appliance.
Denim max.3kg*
Normal +, Normal, Slightly dry, Hand iron, Hand iron
Use for All the denim garments, e.g., jackets, jeans, shirts, and skirts.
Bed linen max.4kg*
Extra dry, Normal +, Normal, Slightly dry, Hand iron , Hand iron , Machine
iron
Use for Bed linen, pillow cases
Programme chart
41
Proofing max.2.5kg*
Use for Microfibre fabrics, skiwear, outdoor wear, fine, close-weave cotton
garments (poplin), and table linen which are suitable for drying in a
tumble dryer.
Note - Items are dried to a Normal level only in this programme.
- This programme includes a proofing agent fixing phase.
- Only use proofing agents which are stated by the manufacturer as
being “suitable for use on membrane textiles”. These agents con-
tain fluorochemical compounds.
- Do not dry items which have been treated with proofing agents
containing paraffin. Fire hazard.
Pre-ironing max.1kg*
Normal, Hand iron
Use for - Cotton and linen fabric.
- For minimum iron items made of cotton, mixed or synthetic fibre.
For example, cotton trousers, anoraks and shirts.
Tip - This programme smoothes out creasing caused during the spin
cycle in the washing machine.
- This programme is also suitable for dry fabrics.
- Please remove the garments as soon as the programme has fin-
ished.
Programme chart
42
Further programmes
Wash2Dry
The programme is selected automatically in conjunction with the programme se-
lection on the connected washing machine.
Warm air max.9kg*
Use for - Multi-layered fabric whose layers have different drying character-
istics, e.g. jackets, pillows, sleeping bags and other voluminous
items.
- For drying individual items, e.g. bath towels, bathing costumes
and tea towels.
Tip Do not select the longest drying time to start with. Check the items
as you are drying them to find the optimum time.
Outerwear max.2.5kg*
Normal, Hand iron
Use for Outerwear which is suitable for tumble drying.
Express max.4kg*
Extra dry, Normal +, Normal, Slightly dry, Hand iron , Hand iron , Machine
iron
Use for Garments that can be dried in the Cottons programme.
Note The programme duration is shorter.
Sportswear max.3kg*
Normal +, Normal, Slightly dry, Hand iron, Hand iron
Use for Sportswear which is suitable for drying in a tumble dryer.
Automatic plus max.5kg*
Normal +, Normal, Slightly dry, Hand iron, Hand iron
Use for Mixed loads of garments suitable for the Cottons and Minimum iron
programmes.
Programme chart
43
Pillows 1-2 pillows 40x80cm or
1 pillow 80x80cm
Use for Pillows suitable for drying in a tumble dryer, with feather, down, or
synthetic fillings.
Tip Items are dried to a Normal level only in this programme.
Note - Feathers have the property of developing a significant odour when
they are warm. Allow bedding to air outside the dryer after tumble
drying.
- Pillows can still feel damp after being dried. You can use this pro-
gramme several times until the pillow feels dry.
Cool air max.9kg*
Use for Any item which only needs airing.
Basket programme max. load for basket 3.5kg
Note - This programme may only be used with the Miele tumble dryer
basket TRK 555 (optional accessory) fitted.
- You must follow the operating instructions for the tumble dryer
basket.
- Make sure that the item (bag, boot, etc.) does not touch the drum:
the tumble dryer drum will rotate, causing damage to the tumble
dryer basket and drum if it is incorrectly loaded.
Fabric
type/Items
Use this programme to dry or air items which are suitable for drying
in a tumble dryer but which are not suitable for drying using mech-
anical action.
Programme chart
44
Silks handcare max.1kg*
Use for Silk garments which are suitable for drying in the tumble dryer, e.g.
blouses and shirts
Note - This programme reduces creasing. Items are not dried completely
by this programme.
- Remove the garments as soon as the programme has finished.
DryFresh max.9kg*
Use for Any item which only needs airing.
Note You can reduce or eliminate unwanted odours in clean, dry textiles.
Use this programme in conjunction with the DryFresh fragrance
flacon (optional accessory1).
1Insert fragrance flacon and set the intensity: see “Fragrance flacon”
Extras
45
The drying programmes can be aug-
mented with various extra options.
However, Freshen up and Gentle
tumble cannot be combined.
Anti-crease
Gentle tumble
Buzzer
Freshen up
Gentle tumble
Delicate fabric (with the symbol on
the care label, e.g. acrylic garments) is
dried at a lower temperature. The pro-
gramme duration is longer.
Freshen up
You can use the Freshen up option to
help remove or reduce odours in clean
(dry or damp) clothing.
The drying air is heated for a specific
length of time. After this, the garments
are aired to the Normal drying level
without any more heat being added.
The drying level cannot be altered.
The option will be more effective if you
dampen the garments a little before-
hand, use a fragrance flacon and re-
duce the load. Please note that odours
will not be removed as effectively from
parts of garments made of synthetic
fibres.
Anti-crease
After the programme has finished, the
drum will continue to rotate in a certain
rhythm. This “Anti-crease rhythm” helps
to prevent creasing, if the laundry is not
removed immediately after the end of a
programme.
Buzzer
A buzzer sounds to let you know the
programme has finished. The buzzer
will always sound when there is a fault,
even if it has been switched off.
Extras
46
Drying programme overview - Extras
Freshen up1Gentle tumble 1Anti-crease Buzzer
Cottons – – X X
Cottons XXXX
Minimum iron XXXX
Delicates –X X
Woollens hand-
care
– – – X
Shirts XXXX
Denim XXXX
Bed linen – – X X
Proofing – – X X
Pre-ironing –X X
Warm air – X X X
Outerwear –X X
Express – – X X
Sportswear – X X X
Automatic plus – X X X
Standard pillows – – X X
Cool air – – X X
Basket pro-
gramme
– – – X
Silks handcare – – X X
DryFresh – – X X
1 = these Extras cannot be combined
X = can be selected
– = cannot be selected
= automatically selected
Changing the programme sequence
47
Changing a programme once it
has started
It is no longer possible to change the
selected programme. This is to prevent
the operation of the machine being
tampered with.
If you adjust the programme selector,
Cannot be changed will light up in the
display. This indicator goes out when
you select the original programme.
Cancelling the current programme
Turn the programme selector to the
position.
The programme is cancelled.
You can now select a new programme.
Adding or removing laundry
You have forgotten something but the
programme is already running.
Touch the Start/Add laundrysensor
control.
The following appears in the display:
Door can be opened. The Start/Add
laundry sensor control flashes slowly.
Open the door.
Add or remove laundry items.
You can still change the programme se-
lection.
Close the door.
Touch the Start/Add laundrysensor
control.
The programme continues.
Exceptions when adding laundry
In some cases, for example, during
the cooling phase or the Proofing pro-
gramme, it is not possible to add laun-
dry items.
In exceptional cases, the door can be
opened while the programme is run-
ning.
Condensed water container
48
Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water container
after every drying programme.
When the maximum level in the con-
densed water container is reached, the
following message will light up in the
display: Empty container. See 
To delete the message:
Open and close the door, with the
tumble dryer switched on.
Damage to the door and the fas-
cia panel when removing the con-
densed water container.
The door and the fascia panel can
sustain damage.
Always close the door completely.
* This does not apply to right-hand
hinged models.
Remove the condensed water con-
tainer.
To prevent water from running out,
keep it in a horizontal position when
carrying it. Hold the condensed water
container by the front panel and at
the back.
Empty the condensed water con-
tainer.
Replace the condensed water con-
tainer in the dryer.
Condensed water can cause health
problems in people and animals.
Do not drink condensed water.
Condensed water can be put to house-
hold use (e.g. used in a steam iron or
humidifier). To ensure that any residual
particles of fluff in the condensed water
are removed before use, pass it through
a fine sieve or paper filter first.
Fragrance flacon
49
FragranceDos
Fragrance flacons (optional accessor-
ies) can be used to give your laundry a
pleasant scent.
This dryer has 2 places for inserting
fragrance flacons. This gives you a
choice of how to use them.
- You can use both positions if you
wish to change from one scent to an-
other. You can close the fragrance
flacon that you are not using.
- Use both positions if you want a more
intense scent of the same fragrance.
Or if you wish to conveniently switch
between a scent for normal laundry
and DryFresh to freshen up your laun-
dry.
- Use one socket only if you only want
to use the one fragrance.
Risk of fire and damage to health
if fragrance flacons are used incor-
rectly.
The leaked fragrance can damage
your health if it comes into contact
with your body. Leaked fragrance
can cause fire.
Before using a fragrance flacon,
please read “Warnings and safety
notes”, “Using the fragrance flacon
(optional accessory)”.
Removing the protective seal
from the fragrance flacon
Only hold the fragrance flacon as il-
lustrated. Do not hold it at an angle
or tip it as the fragrance will leak out
of it.
Hold the fragrance flacon securely so
that you do not open it by mistake.
Pull off the protective seal.
Fragrance flacon
50
Inserting the fragrance flacon
Open the door of the tumble dryer.
The fragrance flacon is inserted in the
upper fluff filter. They can be fitted on
the left and the right hand side next
the opener.
Open the cover using the tab until the
tab is right at the top as shown.
To prevent the accumulation of fluff,
the cover of the unused socket must
remain closed.
Push the tab of the cover to the bot-
tom (see arrow), until you hear it click
into position.
Insert the fragrance flacon into the
socket as far as it will go.
Markers and must line up with
one another.
Fragrance flacon
51
Turn the outer ring clockwise a
little.
The fragrance flacon can slip out.
Turn the outer ring in such a way that
markers and line up.
Opening the fragrance flacon
Before drying, you can select the in-
tensity of the fragrance.
Turn the outer ring clockwise: the fur-
ther you open the fragrance flacon,
the more intense the fragrance.
Damp laundry and longer drying dura-
tions with sufficient heat transfer are
needed for the fragrance to be released
into the laundry effectively. The fra-
grance will also be noticeable in the
room air during the process. The Cool
Air programme will not generally apply
fragrance.
Closing the fragrance flacon
After drying, the fragrance flacon should
be closed to prevent the fragrance from
escaping needlessly.
Turn the outer ring counter-clockwise
until marker b is in position _.
If you wish to dry without the fra-
grance occasionally: remove the fra-
grance flacon and store it in its original
packaging.
Replace the fragrance flacon with a
new one when the intensity of the fra-
grance is no longer sufficient.
Fragrance flacon
52
Removing/replacing the fra-
grance flacon
Turn the outer ring counter-clockwise
until markers a and b line up.
Replace the fragrance flacon with a
new one.
When not in use, you can store the fra-
grance flacon in its original packaging.
Fragrance flacons are available to or-
der from Miele or online at www.miele-
shop.com.
Fragrance can leak.
Do not lay the fragrance flacon
down.
- If you are keeping the fragrance
flacon in its original packaging, do
not store the packaging upright on its
edge or upside down. Otherwise, the
fragrance will leak out.
- Always store in a cool, dry place
away from direct sunlight.
- When purchasing new fragrance flac-
ons, only remove the protective seal
just before use.
Cleaning and care
53
Fluff filters
This tumble dryer has 2 fluff filters in
the door opening: the upper and lower
fluff filters trap fluff produced during
the drying process.
Clean the fluff filters after each drying
programme. This prevents an exten-
sion of the programme duration.
Also clean the fluff filters when Clean
the plinth filter. See  lights up.
To delete the message:
Confirm with OK.
Removing the fragrance flacon
The intensity of the fragrance will be di-
minished if the fluff filters and the plinth
filter are not cleaned.
Remove the fragrance flacon. See
“Fragrance flacon”, “Removing/repla-
cing the fragrance flacon”.
Removing visible fluff
Tip: You can also use a vacuum cleaner
so that you can remove the fluff without
touching it.
Open the door.
Pull the upper fluff filter forwards to
remove it.
Remove the fluff (see arrows).
Cleaning and care
54
Remove the fluff from the filter sur-
face of all the fluff filters and the per-
forated laundry deflector.
Push the upper fluff filter back into
position until it clicks.
Close the door.
Cleaning the fluff filters and air flow
openings thoroughly
If the drying duration has become
longer or the surface of the filters is
visibly compacted with fluff, you
should carry out the following cleaning
procedure.
Remove the fragrance flacon. See
“Fragrance flacon”.
Pull the upper fluff filter forwards to
remove it.
Turn the yellow dial on the lower fluff
filter in the direction of the arrow (until
it reaches the stop position).
Hold the dial and pull the fluff filter
forwards to remove it.
Cleaning and care
55
Use a vacuum cleaner with a long
crevice nozzle attached to remove
any visible fluff from the upper air
flow openings.
Finally, clean the fluff filters with water.
Cleaning the fluff filters with water
Wipe the smooth plastic surfaces of
the fluff filters with a damp cloth to
clean them.
Flush the filters through under warm
running water.
Shake the fluff filters thoroughly and
then dry them carefully.
Ensure the filters are dry before re-
placing them. Wet filters could cause
operational faults.
Push the lower fluff filter in com-
pletely and lock it with the yellow dial.
Push the upper fluff filter in com-
pletely.
Close the door.
Cleaning and care
56
Cleaning the plinth filter
Clean the plinth filter whenever Clean
the plinth filter. See  lights up or when
the programme duration is longer than
usual.
To delete the message:
Confirm with OK.
Removing the plinth filter
Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
Pull the plinth filter out by the handle.
The right-hand guide pin comes out
when the plinth filter is removed. The
guide pin prevents the access panel
from closing without the plinth filter.
Cleaning and care
57
Cleaning the plinth filter
Pull the handle out of the plinth filter.
Clean the plinth filter thoroughly un-
der running water.
Squeeze the plinth filter very carefully
several times as you rinse it.
Rinse the plinth filter until all visible
residues have been removed.
Use a damp cloth to remove any fluff
from the handle.
Damage caused by a damaged
or worn plinth filter.
The heat exchanger will clog up if the
plinth filter is not in good working or-
der. This can cause a fault.
Check the plinth filter following the
instructions provided in “Problem
solving guide – Replacing the plinth
filter”. Replace the plinth filter if ne-
cessary.
Fit the plinth filter back on the handle.
Make sure it is the correct way round.
Push the plinth filter in completely.
This will push in the right-hand guide
pin at the same time.
Cleaning and care
58
Cleaning the plinth filter access panel
Use a damp cloth to remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
Close the heat exchanger access
panel.
Damage or ineffective drying if
drying takes place without a plinth
filter or when the heat exchanger ac-
cess panel is open.
An excessive accumulation of fluff
can damage the tumble dryer. If the
system is not leak-tight, this can
make drying ineffective.
Only operate the tumble dryer with
the plinth filter fitted and the heat ex-
changer access panel closed.
Cleaning the dryer
Disconnect the tumble dryer from the
electrical supply.
Damage due to the use of un-
suitable care products.
Unsuitable care products could dam-
age plastic surfaces and other parts.
Do not use any solvents, abrasive
cleaners, glass cleaners, or all-pur-
pose cleaners.
Clean the tumble dryer and the seal
on the inside of the door with a
slightly damp soft cloth and a mild
solution of washing-up liquid and wa-
ter.
Dry all parts with a soft cloth.
Problem solving guide
59
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Some of the messages in the display are more than one line long. Touch the or
sensor to read them in full.
The display indicates the following messages or faults
Message Cause and remedy
000 lights up after
switching on.
Access via a code has been activated.
Enter the code and confirm the entry. Deactivate
the code if you do not wish this message to ap-
pear in the display the next time the machine is
switched on.
Finish/Cooling down The laundry will be cooled down at the end of the
programme.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
Clean the plinth filter.
See  lights up
at the end of a
programme.
The tumble dryer is not working correctly or econom-
ically. Possible causes could be clogging caused by
fluff or detergent residue.
Please see “Cleaning and care” for notes on clean-
ing.
Clean the fluff filters.
Also check the plinth filter and clean it if neces-
sary.
To switch off the message: confirm OK.
You can influence when the Clean the plinth filter. See
message lights up.
To do this, follow the instructions in “Airways indic-
ator – Settings”.
Problem solving guide
60
Message Cause and remedy
Clean the plinth filter.
See  lights up
after a pro-
gramme has
been cancelled.
The system has been clogged by fluff or detergent
residue.
To switch off the message: confirm OK.
Clean all fluff filters and the plinth filter.
Please see “Cleaning and care” for notes on clean-
ing.
Check that the fluff filters and the plinth filter are
free from damage and in good working order.
If all of the fluff filters are damaged, out of shape or
can no longer be cleaned, they must be replaced.
“Problem solving guide – Replacing the plinth filter”
contains information about when a plinth filter that is
no longer in good working order has to be replaced.
Clean the plinth filter.
See continues
to light up after a
programme has
been cancelled,
despite thorough
cleaning.
The plinth filter looks clean after thorough cleaning.
However, the programme terminates and the error
message appears again. It is likely that there is still
underlying residue that could not be removed.
To switch off the message: confirm OK.
Check for the possible causes described below.
The heat exchanger is clogged.
Check the heat exchanger. Follow the instructions
in “Problem solving guide – Checking the heat ex-
changer”.
The plinth filter is clogged further down.
Check the plinth filter. Follow the instructions de-
scribed in “Problem solving guide – Replacing the
plinth filter”.
If the plinth filter is not out of shape or damaged,
you can reactivate it in a washing machine. Follow
the instructions described in “Problem solving
guide – Reactivating the plinth filter”.
Problem solving guide
61
Message Cause and remedy
Empty container.
See  lights up
after a pro-
gramme has
been cancelled
The condensed water container is full or there is kink
in the drain hose.
Empty the condensed water container.
Check the drain hose.
To switch the fault message off:
Open and close the door while the dryer is
switched on or switch the dryer off and back on
again.
Blockage detected.
See  lights up
after a pro-
gramme has
been cancelled
The laundry is unevenly distributed or has rolled up.
Open the door and loosen the laundry. Remove a
few items if necessary.
Switch the dryer off and then on again.
Start a programme.
 Service Fault F
XXX lights up
after a pro-
gramme has
been cancelled.
There is no obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme terminates again with the same er-
ror message, then there is a fault. Contact Miele.
Problem solving guide
62
Unsatisfactory drying results
Problem Cause and remedy
The laundry is not suffi-
ciently dry.
The load consisted of different types of fabric.
Finish drying using the Warm air programme.
Select a more suitable programme next time.
Tip: You can alter the residual moisture level for some
programmes. See “Settings”.
Laundry or feather filled
pillows smell after dry-
ing
The laundry was washed with insufficient detergent
Feathers are a natural product and this is quite nor-
mal.
Laundry: use sufficient detergent next time.
Pillows: take out of the tumble dryer and air them.
Use a fragrance flacon (available as an optional
accessory) for your favourite fragrance.
Items made of synthetic
fibres are charged with
static electricity after
drying
Synthetic fibres tend to attract static charge.
Static charge can be reduced by adding a fabric
conditioner to the final rinse in the washing pro-
gramme.
There is a build-up of
fluff
Fluff is principally the result of friction when garments
are being worn and to some extent when they are be-
ing washed. Machine drying hardly causes any fluff
to form.
Fluff is collected by the fluff filters and the plinth filter
and can be removed easily.
See “Cleaning and care”.
Problem solving guide
63
The drying cycle duration is very long
Problem Cause and remedy
The drying process
goes on too long or
even switches off.*
The room where the tumble dryer is located is too
warm.
Ventilate the room thoroughly.
Detergent residues, hair and fine fluff can clog the fil-
ters.
Clean the fluff filters and the plinth filter.
Remove visible fluff from the heat exchanger.
The laundry is unevenly distributed or has rolled up.
The drum is too full.
Disentangle the laundry and remove a few items.
Start a programme.
The bottom right grille is blocked.
Move any objects, such as a laundry basket, away
from the dryer.
The laundry is too damp.
Spin using a higher spin speed in the washing ma-
chine.
Metallic components, e.g. zips, have prevented the
tumble dryer from registering the correct laundry
moisture level.
Open any zips next time.
If the problem recurs, dry these items using the
Warm air timed drying programme.
* Switch the tumble dryer off and on again before starting a new programme.
Problem solving guide
64
General problems with the tumble dryer
Problem Cause and remedy
You can hear operating
noises (buzzing/hum-
ming).
This is not a fault.
The compressor (heat pump) is operating.
No action required. These noises are quite normal
and can be heard when the compressor is operat-
ing.
A programme does not
start
No obvious cause.
Connect the tumble dryer to the mains
Turn on the tumble dryer
Close the door
Check whether the mains fuse has tripped
Has there been a power cut? When power is re-
stored any previously running programme will re-
start automatically.
The display is dark and
the Start/Add laundry
sensor control is flash-
ing slowly.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals when the tumble dryer
is in the anti-crease phase.
Press any control. This switches Standby off.
The dryer is switched
off at the end of the
programme.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
The display is in a dif-
ferent language.
A different language has been selected in “Settings,
Language ”.
Set the language you want. The flag symbol serves
as a guide.
The interior drum light-
ing does not come on.
Not a fault. The drum lighting switches off automat-
ically in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.
Problem solving guide
65
Replacing the plinth filter
The heat exchanger can clog up.
Replace the plinth filter immediately
if you see the following signs of wear
before or after cleaning (optional ac-
cessory).
Poor fit
The edges of the plinth filter do not sit
properly and the plinth filter is out of
shape. Fluff will blow into the heat ex-
changer unfiltered through edges that
do not sit properly. This will, in time,
cause a blockage in the heat ex-
changer.
Deformations
Deformations indicate that the filter has
become blocked and worn by continu-
ous use.
Problem solving guide
66
Cracks, tears, indentations
Fluff will blow into the heat exchanger
through cracks and tears. This will, in
time, cause a blockage in the heat ex-
changer.
White residues or residues of other col-
ours
These residues arise from laundry fibres
and traces of detergent components.
They can be found on the front and side
edges of the plinth filter. In extreme
cases, they can form stubborn crust.
Residues are a sign that the plinth filter
no is longer a snug fit at the sides, even
if it appears to be perfect:
fluff is getting in unfiltered at the edges.
Reactivate the plinth filter. If these
residues appear on the plinth filter again
soon after cleaning, the plinth filter must
be replaced.
Problem solving guide
67
Reactivating the plinth filter
You can reactivate one or more soiled
plinth filters in a washing machine. You
will then be able to use the plinth filter
again.
Prior to reactivation, check that the
plinth filter is in good order. Check the
plinth filter following the instructions
provided in “Problem solving guide –
Replacing the plinth filter”. Replace the
plinth filter if it has worn out.
Wash the plinth filter(s) separately,
not with any laundry items. Do not
add any detergent.
Select a short wash programme with
a maximum temperature of 40°C and
a maximum spin speed of 600rpm.
You can re-insert the plinth filter once
the wash and spin cycles are complete.
Checking the heat exchanger
Risk of injury from sharp cooling
fins.
You could cut yourself.
Do not touch the cooling fins with
your hands.
Look to see if fluff has accumulated.
Remove any fluff you can see.
Damage due to incorrect clean-
ing of the heat exchanger.
The tumble dryer will not dry if the
cooling fins are damaged or bent.
Clean using a vacuum cleaner with a
suction brush attached. Only pass
the vacuum cleaner brush over the
heat exchanger cooling fins lightly,
without applying any pressure.
Use a vacuum cleaner to remove fluff
and residues.
Service
68
Contact in the event of a fault
In the event of any faults which you
cannot remedy yourself, please contact
your Miele dealer or the Miele Customer
Service Department.
You can book a Miele Customer Ser-
vice Department call-out online at
www.miele.com/service.
Contact information for the Miele Cus-
tomer Service Department can be
found at the end of this document.
Please quote the model identifier and
serial number of your appliance (Fabr./
SN/Nr.) when contacting the Miele Cus-
tomer Service Department. This inform-
ation can be found on the data plate.
Please note that telephone calls may be
monitored and recorded for training
purposes and that a call-out charge will
be applied to service visits where the
problem could have been resolved as
described in this booklet.
The data plate is visible when the door
is open.
Optional accessories
Optional accessories for this tumble
dryer are available from Miele or from
your Miele dealer.
You also can order these and many
other useful products from the Miele
online shop.
Dryer basket
The dryer basket is enables items which
must not be subjected to mechanical
action to be dried or aired.
Fragrance flacon
A fragrance flacon can be used in your
tumble dryer to add a pleasant fra-
grance to your laundry.
Warranty
For information on the appliance war-
ranty specific to your country please
contact Miele. See back cover for ad-
dress.
In the UK, your appliance warranty is
valid for 2 years from the date of pur-
chase. However, you must activate your
cover by calling 0330 160 6640 or re-
gistering online at www.miele.co.uk.
Installation
*INSTALLATION*
69
Front view
aMains connection cable
bControl panel
cCondensed water container
– empty after every drying cycle
dDoor
– do not open during drying
eHeat exchanger access panel
– do not open during drying
fFour height adjustable screw feet
gCool air intake grille
– do not obstruct with a laundry bas-
ket or other objects
hHose for external drainage of con-
densed water
Installation
*INSTALLATION*
70
Rear view
aProtruding lid for holding when mov-
ing the tumble dryer (see arrows)
bDrain hose for condensed water
cHook for winding the mains cable
around during transport
dMains connection cable
Transporting the tumble dryer
Danger of injury to people and
damage to property caused by mov-
ing the appliance incorrectly.
If the tumble dryer tips up there is a
danger of injury to people and dam-
age to property.
Ensure that the tumble dryer is stable
during transportation.
If the tumble dryer is being transpor-
ted on its side, it must be tipped onto
its left or right side.
If the tumble dryer is being transpor-
ted upright and you are using a hand
truck, you must transport it with its
left or right side resting on the truck.
Transporting the tumble dryer to its
installation site
Make sure the fixings at the back
of the lid are secure.
Otherwise there is a danger of the lid
being pulled off when carrying the
appliance.
Before carrying the appliance check
that the lid is secure where it pro-
trudes at the back of the appliance.
Carry the tumble dryer by the front
feet and by the lid where it protrudes
at the back of the appliance.
Installation
*INSTALLATION*
71
Installation
Levelling the dryer
Ensure that no closeable door, slid-
ing door, or an oppositely hinged
door is installed that would hinder
the door of the dryer being opened in
any way.
The dryer must stand perfectly level to
ensure safe and proper operation.
The screw feet can be adjusted to com-
pensate for unevenness in the floor.
Downtime after installation
Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer wait
for at least one hour before switching
it on.
Ventilation
The cool air intake at the front of the
tumble dryer must not be blocked or
covered. This would hinder a suffi-
cient intake of cool air for the heat
exchanger.
Do not block the gap between the
bottom of the tumble dryer and the
floor with plinth facings, deep pile
carpet etc. This would hinder a suffi-
cient flow of air to the tumble dryer.
The hot air that is blown out from the
heat exchanger warms the room air. En-
sure sufficient ventilation of the room:
e.g., open the window. The drying time
will otherwise take longer (higher energy
requirement).
Before moving the tumble dryer
again (e.g. when moving house)
After each use a small quantity of con-
densed water will collect in the area of
the pump. This water can run out if the
tumble dryer is tipped up when it is be-
ing moved. Recommendation: run the
Warm air programme for approximately
1minute before moving the tumble
dryer. Any remaining condensed water
will then be fed into the condensed wa-
ter container or out through the drain
hose.
Installation
*INSTALLATION*
72
Additional installation require-
ments
Slot-in
This tumble dryer is suitable for pushing
under a worktop.
Appliance defect due to a build-up of
heat.
Make sure there is adequate room
for warm air from the dryer to be dir-
ected away.
- The appliance lid cannot be removed.
- The electrical socket must be located
in an accessible position near the
tumble dryer.
- Drying durations may increase
slightly.
Optional accessories
– Washer-dryer stack
The tumble dryer can be combined with
a Miele washing machine in a washer-
dryer stack. The appropriate Miele
washer-dryer stacking kit is required.
– Plinth
The tumble dryer can be fitted on a
plinth with drawer (please note the
plinth may not be available in all coun-
tries).
Installation
*INSTALLATION*
73
External condensed water out-
let
Note
When drying is in progress, con-
densed water is pumped into the con-
densed water container through the
drain hose which is located at the
back of the dryer.
The condensed water can also be ex-
ternally drained away via the drain hose
at the back of the dryer. This means
that the condensed water container no
longer has to be emptied.
Drain hose length: 1.49m
Max. delivery head: 1.00m
Max. drain hose length: 4.00m
Drainage accessories
- Supplied: Adapter (b), Hose clip (c),
Hose holder (e);
- Available to purchase: “Non-return
valve” kit for connection to an ex-
ternal water connection. Non-return
valve (d), Hose extension (a) and
Hose clips (c) are supplied.
Installation conditions requiring a
non-return valve
Danger of condensed water
back-flow.
Water could flow back into the
tumble dryer or be drawn into it.
Back-flow water could damage the
tumble dryer and also the room in
which it is located.
The non-return valve should be used
if the end of the hose is immersed in
water, or if other water connections
are installed.
Maximum delivery head with non-return
valve fitted: 1.00m
Installation conditions requiring the fit-
ting of a non-return valve:
- Drainage into a sink or floor gully
where the end of the hose is im-
mersed in water.
- Connection to a sink drain outlet.
- Connection to a drainage system
already in use by another appliance,
e.g. a dishwasher or washing ma-
chine.
If the non-return valve is incorrectly
fitted the appliance will not drain.
The non-return valve has to be fitted
with the arrow on it pointing in the
direction of flow.
Installation
*INSTALLATION*
74
Arranging the drain hose
Damage to the drain hose
through incorrect handling.
The drain hose can suffer damage
and leak.
Do not pull on the drain hose and do
not stretch it or allow it to become
kinked.
There will be a small amount of residual
water left in the drain hose. Have a con-
tainer ready to collect this.
Pull the drain hose off its connection
(light arrow).
Pull the hose out of the holders (dark
arrow) and unwind it.
Allow any residual water to run into a
container.
Examples
Drainage into a sink or floor gully
Use the hose holder to secure the drain
hose.
Water damage.
Should the end of the hose come
loose, overflowing water can cause
damage.
Secure the drain hose carefully (e.g.,
by tying it) to make sure it cannot
slip.
The non-return valve can be fitted in the
end of the hose.
Installation
*INSTALLATION*
75
Direct connection to a sink drain outlet
Use the hose holder, the adapter, the
hose clips and the non-return valve
(available to purchase).
1. Adapter
2. Nut
3. Hose clip
4. End of the hose (secured with the
hose holder)
5. Non-return valve
6. Tumble dryer drain hose
Fit adapter 1 to the sink drain outlet
using nut 2.
The nut is usually fitted with a washer
which must be removed.
Attach the end of the hose 4 to ad-
apter 1.
Use the hose holder.
Use a screwdriver to tighten hose clip
3 up close to the nut.
Fit non-return valve 5 to tumble dryer
drain hose 6.
Non-return valve 5 has to be fitted so
that the arrow points in the direction
of flow (i.e. towards the sink).
Secure the non-return valve using
hose clips.
Installation
*INSTALLATION*
76
Changing the door hinging
You can change the door hinging on
this tumble dryer yourself.
For safety reasons the tumble dryer
must be disconnected from the elec-
tricity supply before changing the
door hinging.
You will need:
- a Torx T20 and T30 screwdriver
- a flat head screwdriver or pointed pli-
ers
- the lock catch cover supplied
- the door hinge cover supplied
- a soft surface (e.g. a tablecloth)
Changing the hinging over
1. Remove the door from the dryer
Open the door.
Use a T30 Torx screwdriver to un-
screw the two screws on the base
plate of the door hinge .
The door cannot fall off as it is held in
place by 2 pins.
Hold the door securely and pull it for-
wards: to remove the door you will
need to pull the base plate of the
hinge with its 2 pins out of the dryer.
To avoid scratching the door, place it
outer side downwards on a soft sur-
face (e.g. a tablecloth).
2. Change over the door lock on the
dryer
Use a Torx T30 screwdriver to un-
screw the two screws on the door
lock .
Use the screwdriver to press the door
lock upwards.
The door lock will spring out of its posi-
tion and can then be removed.
Installation
*INSTALLATION*
77
Turn the door lock through 180°.
Press the door lock into openings
on the opposite side of the door
opening.
Adjust the position of the door lock
so that the screw holes line up with
those in the front panel of the dryer
.
Secure the door lock with the two
Torx screws.
3. Remove the lock catch from the
door
First take the rubber seal off the door
and place this to one side.
Use a T20 Torx screwdriver to remove
screw on the lock catch.
Pull off the lock catch together with
lock catch cover .
Remove the lock catch from the
cover.
This lock catch cover is no longer
needed, however, please keep it in a
safe place.
Installation
*INSTALLATION*
78
Insert the lock catch into the new
cover supplied with the dryer.
Place this new cover to one side for
now.
4. Dismantle the door hinge from the
door
The door hinge cover must be un-
clipped from position and then re-
moved.
Use a screwdriver to press down
gently on position on the door
hinge cover.
Using a little force, pull out door
hinge cover .
This door hinge cover is no longer
needed, however, please keep it in a
safe place.
Installation
*INSTALLATION*
79
5. Change over the door hinge on the
door
The door hinge is secured to the door
with 2 angled rods. These rods need
to be removed with a screwdriver or
pointed pliers.
Insert the end of the screwdriver
blade under rod and rotate it so it
is in an upright position. Do the same
to the other rod.
Use the screwdriver or pointed pliers
to guide first one then the other rod
to the middle until each can be re-
moved.
Tip: In some circumstances, the rods
can be difficult to dislodge. Moving the
screwdriver with a levering action while
pulling at the same time may help to
work the rods free.
Remove the door hinge and turn it
through 180°.
Fit the door hinge on the opposite
side of the door.
Secure the door hinge with the two
rods .
Position the tip of the screwdriver un-
der the end of the rod and then push
it into its resting position .
Installation
*INSTALLATION*
80
You now need the new door hinge
cover supplied with the tumble dryer.
Fit new door hinge cover and clip
it into position.
6. Change the lock catch on the door
You now need the new lock
catch cover supplied with the dryer
which you have already fitted with
the lock catch.
Push lock catch cover with its lock
catch into position.
Tighten screw .
Installation
*INSTALLATION*
81
Refitting
7. Refit the door
Press the rubber seal back into the
grove on the door.
Position the door in front of the dryer.
Fit the base of the door hinge with its
2 pins into the openings on the dryer.
The base of the door hinge must be
flush with the front panel of the dryer.
The door cannot fall off in this position.
Screw the door securely to the dryer
at the base of door hinge .
Now that you have changed the
door hinging the door will open from
the opposite side.
Push the orange marker round to the
other side so that you will see at
which side to pull the door open.
Important
Please keep the lock catch and
door hinge covers which were no
longer needed in a safe place. These
will be required if, for example, you
move house and need to change the
door hinging back to its original posi-
tion.
Installation
*INSTALLATION*
82
Electrical connection
The tumble dryer is supplied with a
mains cable with moulded plug ready
for connection to a suitable switched
socket.
The socket must be easily accessible
after the tumble dryer has been in-
stalled. If that is not possible, ensure
that a suitable means of disconnection
is provided on the installation side for
each pole.
Risk of fire from overheating.
Connecting the tumble dryer to a
multi-socket plug adapter or to an
extension lead can overload the
cable.
For safety reasons, do not use an ex-
tension lead or multi-socket plug ad-
apter.
The electrical system must comply with
local and national safety regulations
(BS7671 in the UK). We recommend
the use of a suitable RCD .
If the connection cable is damaged, it
must only be replaced with a specific
connection cable of the same type
(available from the Miele Customer Ser-
vice Department). For safety reasons,
such replacement may only be carried
out by a qualified technician or the
Miele Customer Service Department.
The data plate indicates the nominal
power consumption and the appropri-
ate fuse rating. Compare the specifica-
tions on the data plate with those of the
electricity supply and make sure that
they match.
If in any doubt, consult a qualified elec-
trician.
Do not connect the tumble dryer to a
stand-alone inverter such as those used
with an autonomous energy source, e.g.
solar power. When the tumble dryer is
switched on, power surges could result
in a safety switch-off. This could dam-
age the electronic module.
Technical data
83
Height 850mm
Width 596mm
Depth 643mm
Depth with door open 1077mm
Suitable for pushing under a worktop Yes
Suitable for stacking Yes
Weight approx. 62 kg
Drum volume 120litres
Load size 9.0 kg (weight of dry laundry)
Capacity of condensed water container 4.8l
Hose length 1.49m
Maximum delivery head 1.00m
Maximum drain hose length 4.00m
Length of connection cable 2.00m
Voltage See data plate
Connected load See data plate
Fuse rating See data plate
Test certificates awarded See data plate
Energy consumption See “Consumption data”
LEDs Class 1
Frequency band 2.4000GHz–2.4835GHz
Maximum transmission power <100mW
Technical data
84
Data sheet for household tumble driers
In acc. with delegated regulation (EU) No. 392/2012
MIELE
Model name/identifier TWJ660WP
Rated capacity19,0 kg
Type of tumble drier (Air-vented / condenser) - / ●
Energy efficiency class
A+++ (most efficient) to D (least efficient) A+++
Weighted annual energy consumption (AEc)2193 kWh/year
Tumble drier (Automatic / non-automatic) ● / -
Energy consumption of the standard cotton programme
Energy consumption at full load 1,63 kWh
Energy consumption at partial load 0,86 kWh
Weighted power consumption in off-mode (Po) 0,20 W
Weighted power consumption in the left-on mode (Pl) 0,20 W
Duration of the 'left-on' mode (Tl)315 min
Standard programme to which the information in the label and the fiche
relates4
Cottons with arrow
Programme time of the 'standard cotton programme'
Weighted programme time 160 min
Programme time at full load 208 min
Programme time at partial load 124 min
Condensation efficiency class5
A (most efficient) to G (least efficient) A
Weighted condensation efficiency for the 'standard cotton programme' at
full and partial load
93 %
Average condensation efficiency of the 'standard cotton programme' at full
load
93 %
Average condensation efficiency of the 'standard cotton programme' at par-
tial load
93 %
Sound power level (LWA)664 dB(A) re 1 pW
Built-in -
● Yes, standard feature
1In kg of cotton laundry for the standard cotton programme at full load.
2based on 160 drying cycles of the standard cotton programme at full and partial load, and the con-
sumption of the low-power modes. Actual energy consumption per cycle will depend on how the ap-
pliance is used.
Technical data
85
3If the household tumble drier is equipped with a power management system.
4This programme is suitable for drying normal wet cotton laundry and is the most efficient programme
in terms of energy consumption for cotton.
5If the household tumble drier is a condenser tumble drier.
6For the standard cotton programme at full load.
Technical data
86
Conformity declaration
Miele hereby declares that this heat-pump tumble dryer complies with Directive
2014/53/EU.
The complete text of the EU declaration of conformity is available from one of the
following internet addresses:
- Products, Download from www.miele.co.uk
- For service, information, operating instructions etc: go to www.miele.co.uk/do-
mestic/customer-information-385.htm and enter the name of the product or the
serial number
Consumption data
87
Load size1Final spin speed in
washing machine
Residual
mois-
ture
Energy Duration
kg rpm % kWh min
Cottons 29.0
4.5
1000
1000
60
60
1.63
0.86
208
124
Cottons Normal 9.0
9.0
9.0
1200
1400
1600
53
50
44
1.45
1.40
1.25
189
179
160
Cottons Normal
incl. Gentle tumble
9.0 1000 60 1.70 200
Cottons Hand iron9.0
9.0
9.0
9.0
1000
1200
1400
1600
60
53
50
44
1.25
1.10
1.00
0.85
147
129
120
102
Minimum iron Normal 4.0 1200 40 0.50 70
Minimum iron Normal
incl. Gentle tumble
4.0 1200 40 0.50 72
Delicates Normal 2.5 800 50 0.55 75
Woollens handcare 2.0 1000 50 0.02 5
Shirts Normal 2.0 600 60 0.45 65
Express Normal 4.0 1000 60 0.85 110
Denim Normal 3.0 900 60 1.00 125
Proofing Normal 2.5 800 50 0.90 120
1 Weight of dry laundry
2 Test programme in accordance with Regulation 392/2012/EU for energy labelling, measured in ac-
cordance with EN 61121
All data was calculated using EN 61121 unless otherwise stated.
Consumption data can vary from the nominal values given above depending on the size of the
load, types of textiles, residual moisture levels after spinning and fluctuations in the electricity
supply, or when water hardness levels differ from specified values.
The consumption data shown in the EcoFeedback display can vary from the consumption data quoted
here. The variations arise from the way the data is measured in the dryer. For example, the programme
duration may vary depending on the residual moisture present in the laundry and the type of fabric
which will affect the energy requirement.
Settings
88
Accessing the settings menu
You can alter the tumble dryer's elec-
tronics to suit changing requirements
with the settings.
The settings can be altered at any
time.
Turn the programme selector to Fur-
ther programmes/.
OK
Warm air
Touch the sensor control once.
The following appears in the display:
OK
Settings 
Confirm with the OKsensor control.
OK
Language 
You are now in the Settings submenu.
Selecting settings
Touch the or sensor until the
setting you want appears in the dis-
play.
- The sensor scrolls down the list.
- The sensor scrolls up the list.
Touch the OK sensor to select the
setting displayed.
Changing a setting
Touching the or sensor will call
up the different options for the set-
ting.
For example, you can
- select a value. If the option is marked
with a it is active,
- change a bar chart,
- change numbers.
When the option you want appears in
the display, touch the OK sensor to
activate it.
Closing the settings menu
Turn the programme selector.
Settings
89
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language
(Sprache in German) acts as a guide in
case a language which is not under-
stood has been set.
The language selected is saved.
Drying levels
You can alter the drying levels for the
Cottons, Minimum iron and Automatic
programmes.
Selection
-       (damper)
The programme duration is shorter
-       (factory default setting)
-       (drier)
The programme duration is longer
Cooling down temp.
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all the drying level pro-
grammes. This means that the cooling
phase is extended.
Selection
The value is set in increments of 1°C.
- 55°C (factory default setting)
- ...
- 40°C
Welcome tone
The volume for the welcome tone can
be set to one of 7 different settings.
Selection
-Off
-       (quiet)
-       (factory default setting)
-       (loud)
Settings
90
Keypad tone
Each touch of a sensor is confirmed
with an audible tone.
Selection
-Off (factory default setting)
-       (quiet)
-       (loud)
If a selection is not allowed, a negative
tone sounds.
Buzzer volume
The buzzer sounds to let you know the
programme has finished. The buzzer
can be set to be louder or quieter.
Selection
-       (quiet)
-       (factory default setting)
-       (loud)
Airways indicator
Fluff should be removed after drying.
In addition, this indicator will remind
you to clean the filters when a certain
amount of fluff has collected in them:
Clean the plinth filter. See 
You can decide at what level of fluff
this reminder should be given.
Selection
You will have an idea of how often this
should be done after a few drying pro-
grammes.
-Off
This reminder does not appear. How-
ever, if there is a very severe block-
age in the ducting, the programme
will be cancelled and the error mes-
sage Clean the plinth filter. See 
will appear in the display regardless
of this option.
-Heavy
The reminder only appears when
there is a heavy build-up of fluff.
-Normal (factory default setting)
-Light
The reminder appears when there is
only a small build-up of fluff.
Settings
91
Conductivity
This setting is only relevant for regions
with very soft water.
Very soft water can result in unsatis-
factory drying results.
You should only select this setting if
the water used for washing the laun-
dry is extremely soft with a conduct-
ivity reading (electrical conductivity)
less than 150μS/cm. Contact your
local water authority for the conduct-
ivity level of your mains water supply.
Selection
-Normal (factory default setting)
-Low <150ms (only for regions with
very soft water)
Consumption
You can display the total consump-
tion.
Selection
-Previous programme
Displays energy consumption in the
last programme run
-Total consumption
Displays the total consumption to
date
-Reset function
Deletes the total consumption to date
Settings
92
Code
The code prevents your dryer being
used without your knowledge.
Selection
-Activate
The code is 250 and can be activ-
ated.
If the code has been activated, you
have to enter the code after switching
the dryer on. Otherwise the dryer
cannot be operated.
-Deactivate
For using the dryer without entering
the code. This only appears if the
code had been activated previously.
-Change
You can enter a code of your own.
Make a note of your new code. If
you forget the code, the dryer will
need to be unlocked by Miele Tech-
nical Service.
Brightness
You can set the brightness of the dis-
play, the sensor controls, and the
dimmed sensor controls.
Selection
Display
Controls the brightness of the display.
-       (dark)
-       (factory default setting)
-       (light)
Buttons active
Controls the brightness of the activated
sensor controls.
-       (dark)
-       (light)
Buttons inactive
Controls the brightness of the sensor
controls that can be activated.
-       (dark)
-       (light)
Tip: Ensure that there is a discernible
difference in brightness between the
activated and dimmed sensor controls.
This makes it easier to operate the ap-
pliance.
Settings
93
Disp. switch-off stat.
To save energy, the display and
sensor controls will go out after
10minutes. The Start/Add laundry
button flashes slowly. You can change
this setting.
Selection
-On (default setting)
The display will go out (after
10minutes):
– if a programme is not selected
after the dryer has been switched
on
– during the current programme
– after the end of a programme.
-On (not current pr.)
The display will go out (as described
above) but will remain on while the
programme is running.
-Off
The display will remain on (i.e. it will
never go out).
You can switch the display back on by
touching any sensor control.
Memory
The dryer saves the settings that were
selected last for a drying programme
(drying stage and/or extra option, or
the duration for some programmes).
When the programme is chosen again,
the saved settings will appear in the
display.
Selection
-Off (factory default setting)
-On
The activation of delay start, the buzzer,
or ECO feedback data are not saved.
Anti-crease
The duration of the anti-crease phase
can be altered.
Selection
-1 h
-2 h (factory default setting)
Settings
94
Programme info
The programme names and load size,
which are lit in the display when the
programme is selected with the pro-
gramme selector, can be switched off.
Selection
-Off (programme name and load size
are not displayed)
-Programme name The load size does
not appear in the display.
-Prog. & max load (both are displayed,
factory setting)
Miele@home
Control the networking of your tumble
dryer with your home WiFi network.
The following points may appear in the
submenu:
– Set up
This message only appears if the
tumble dryer has not yet been connec-
ted to a WiFi network.
Please refer to “Before using for the first
time” for instructions on how to set up
the connection.
– Deactivate (Visible if Miele@home is
activated)
Miele@home remains set up, the WiFi
function is switched off.
– Activate (Visible if Miele@home is de-
activated)
The WiFi function is reactivated.
– Connection status (Visible if
Miele@home is activated)
The following values are displayed:
- the quality of WiFi reception
- the network name
- the IP address
– Set up again (Visible if set up)
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.
– Reset (Visible if set up)
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be re-
set whenever a tumble dryer is being
disposed of or sold, or if a used tumble
dryer is being put into operation. This is
the only way to ensure that all personal
data has been removed and the previ-
ous owner will no longer be able to ac-
cess the tumble dryer.
A new connection has to be established
in order to use Miele@home again.
Settings
95
Remote control
The Remote control setting is only vis-
ible if the Miele@home setting is set up
and activated.
Once the Miele@mobile app has been
installed on your mobile device, you
can check the status of your tumble
dryer from anywhere and start it re-
motely. You can also control it re-
motely via the MobileStart pro-
gramme.
You can switch off the Remote control
setting if you do not want to operate the
tumble dryer with your mobile device.
If Remote control is not switched on, the
app can cause the programme to be
cancelled.
Use the “Delay start” button to set a
time at which you wish to start the
tumble dryer and start the delay start
(see “Delay start/SmartStart”).
The tumble dryer will then start within
the timeframe specified when it receives
your signal.
If it has not received a start signal by
the latest start time set, the tumble
dryer will start automatically.
Remote control is activated by default.
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
This function can be used for starting
your tumble dryer automatically at a
time when your energy costs are most
economical.
Activating SmartGrid gives the Delay
start sensor a new function. Use the
“Delay start” control to set the
SmartGrid. The tumble dryer will then
start within the timeframe specified
when it receives a signal from the en-
ergy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the tumble dryer will start automat-
ically (see “Delay start”).
SmartGrid is deactivated as standard.
Settings
96
Wash2Dry
You can select the Wash2Dry function
under Further programmes.
Options
-Off
-On
Wash2Dry is enabled and you will
find this function under Further pro-
grammes.
RemoteUpdate
The RemoteUpdate function is used for
updating the software in your tumble
dryer.
RemoteUpdate is activated by default.
If you do not install a RemoteUpdate,
you can continue to use your tumble
dryer in the usual way. However, Miele
recommends installing RemoteUpdates.
Activation
The RemoteUpdate menu option is
only displayed and can only be selec-
ted if you have added your tumble
dryer to your WiFi network (see
“Miele@home” in the “Settings”
chapter).
Miele’s RemoteUpdate function can
only be used if the tumble dryer is con-
nected to a WiFi network and you have
an account in the Miele@mobile app.
The tumble dryer must be registered in
it.
See the Miele@mobile app for terms
and conditions of use.
Some software updates can only be
carried out by Miele Service.
Running a RemoteUpdate
If a RemoteUpdate is available for your
tumble dryer, it will be displayed auto-
matically for you.
You can choose to start the RemoteUp-
date immediately or wait until later. If
you select “Start later”, the prompt to
run the RemoteUpdate will be displayed
again the next time you switch on your
tumble dryer.
The RemoteUpdate can take a few
minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
a RemoteUpdate is available.
- Once a RemoteUpdate has been in-
stalled, it cannot be undone.
- Do not switch off the tumble dryer
during a RemoteUpdate. Otherwise,
the RemoteUpdate will be aborted
and will not be installed.
United Kingdom
Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW
Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive
Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
Miele Electrical Appliances Co., Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500
Fax: +86 21 6157 3511
E-mail: info@miele.cn,
Internet: www.miele.cn
China Mainland
Miele (Hong Kong) Ltd.
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025
Fax: (852) 3579 1404
Email:
customerservices@miele.com.hk
Website: www.miele.hk
Hong Kong, China
Miele India Pvt. Ltd.
1st Floor, Copia Corporate Suites,
Commercial Plot 9,
Mathura Road, Jasola,
New Delhi - 110025
E-mail: customercare@miele.in
Website: www.miele.in
India
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel: (01) 461 07 10
Fax: (01) 461 07 97
E-Mail: info@miele.ie
Internet: www.miele.ie
Ireland
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana
Petroleum
Solaris Dutamas No. 1
Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Miele New Zealand Limited
IRD 98 463 631
8 College Hill
Freemans Bay, Auckland 1011
New Zealand
Tel: 0800 464 353
Internet: www.miele.co.nz
New Zealand
Miele Pte. Ltd.
29 Media Circle
#11-04 ALICE@Mediapolis
Singapore 138565
sTel: +65 6735 1191
Fax: +65 6735 1161
E-Mail: info@miele.com.sg
Internet: www.miele.sg
Singapore
Miele (Pty) Ltd.
63 Peter Place
Bryanston 2194
P.O. Box 69434
Bryanston 2021
Tel: (011) 875 9000
Fax: (011) 875 9035
E-mail: info@miele.co.za
Internet: www.miele.co.za
South Africa
Miele Appliances Ltd.
Showroom 1
Eiffel 1 Building
P.O. Box 114782 - Dubai
Tel. +971 4 3044 999
Fax. +971 4 3418 852
800-MIELE (64353)
E-Mail: info@miele.ae
Website: www.miele.ae
United Arab Emirates
Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Thailand
Miele Appliances Ltd.
BHIRAJ TOWER at EmQuartier
43rd Floor Unit 4301-4303
689 Sukhumvit Road
North Klongton Sub-District
Vadhana District
Bangkok 10110, Thailand
Sheikh Zayed Road, Umm Al Sheif
M.-Nr. 11 663 310 / 01en-GB
TSJ 663 WP
… 67 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Miele-TSJ-663-WP-Eco

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Miele TSJ 663 WP Eco bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Miele TSJ 663 WP Eco in de taal/talen: Engels als bijlage per email.

De handleiding is 4.81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Miele TSJ 663 WP Eco

Miele TSJ 663 WP Eco Gebruiksaanwijzing - Nederlands - 92 pagina's

Miele TSJ 663 WP Eco Gebruiksaanwijzing - Deutsch - 100 pagina's

Miele TSJ 663 WP Eco Gebruiksaanwijzing - Français - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info