Handleiding Miele G 2383 SCVi XXL (pagina 12 van 72) (Engels)

105526

Verklein

Vergroot

Pagina terug

1/72

Pagina verder

Operating instructions

for dishwashers

To avoid the risk of accidents or

damage to the appliance, it is

essential to read these instructions

as well as the installation plan before

it is installed and used for the

first time.

M.-Nr. 07 502 340

en-GB

Guide to the appliance .............................................5

Appliance overview .................................................5

Control panel ......................................................6

Warning and Safety instructions .....................................7

Caring for the environment.........................................12

Disposal of the packing material ......................................12

Disposal of your old appliance .......................................12

Energy saving washing .............................................13

Before using for the first time.......................................14

To open the door ..................................................14

To close the door ..................................................14

Water softener ....................................................15

To programme the water hardness level .............................16

To call up the water hardness level in the display.........................17

Before using the appliance for the first time you require: ...................18

Filling the salt reservoir .............................................18

Salt indicator .....................................................20

Rinse aid ........................................................21

Adding rinse aid ..................................................21

Rinse aid indicator .................................................22

Setting the rinse aid dosage .........................................23

Loading the dishwasher ...........................................24

Items not suitable for dishwashers: ....................................25

Upper basket .....................................................26

Hinged cup rack ................................................26

Positioning rail (depending on model) ...............................26

Support rail (depending on model) ..................................27

Adjusting the upper basket .......................................28

Lower basket .....................................................29

Hinged spikes..................................................29

Removable spiked insert .........................................30

Removable vario insert

(depending on model) ...........................................30

Bottle holder (depending on model).................................31

Cutlery ..........................................................32

Cutlery tray (depending on model)..................................32

Cutlery basket (depending on model) ...............................33

Contents

Operation .......................................................34

Detergent ........................................................34

Adding detergent..................................................35

Switching on .....................................................36

Selecting a programme .............................................36

Starting a programme ..............................................36

Time display......................................................37

At the end of a programme ..........................................37

Switching off .....................................................38

Unloading the dishwasher ...........................................38

Interrupting a programme ...........................................39

Changing a programme ............................................39

Additional functions ..............................................40

Turbo/Combi tabs .................................................40

Delay start .......................................................41

Buzzer ..........................................................43

Factory default setting ..............................................44

Adjust Sensor wash ................................................45

Cleaning and care ................................................46

Cleaning the wash cabinet ..........................................46

Cleaning the door and the door seal ...................................46

Cleaning the reflector panel .........................................46

Cleaning the control panel and door front...............................47

Cleaning the filters in the wash cabinet.................................48

Cleaning the spray arms ............................................50

Problem solving guide ............................................51

Technical problems ................................................51

The dishwasher does not fill/drain .....................................53

General problems .................................................54

Noises ..........................................................56

Unsatisfactory washing result ........................................57

Maintenance .....................................................60

Cleaning the water inlet filter .........................................60

Cleaning the drain pump and non-return valve...........................61

Programme chart .................................................62

Contents

After sales service ................................................66

Repairs .......................................................66

Future updates .................................................66

For testing institutes................................................66

Optional accessories..............................................67

Electrical connection..............................................68

Plumbing........................................................69

The Miele waterproof anti-leak system .................................69

Connection to the water supply .......................................69

Drainage ........................................................70

Technical data ...................................................71

Contents

Appliance overview

a Upper spray arm (not visible)

b Cutlery tray (depending on model)

c Upper basket

d Middle spray arm

e Air inlet for drying

(depending on model)

f Lower spray arm

g Filter combination

h Data plate

i In-operation indicator light

j Rinse aid reservoir

k Dual compartment detergent

dispenser

l Salt reservoir

Guide to the appliance

Control panel

a Time display

b Delay start button ,

with indicator light

c "Turbo/Combi tabs" button

d Check/Refill indicators

e Programmes

f Programme selector button

g On button U with indicator light

h Off button V

i In-operation indicator light

This instruction book applies to several different dishwasher models.

The specific dishwasher models below are referred to as follows:

G 1383 etc. = G 1XXX

G 2383 etc. = G 2XXX

The model numbers G 1XXX and G 2XXX used in this book refer to the model

designation specified on the data plate of the appliance (and not the

description on the control panel).

The data plate is located at the top right hand side of the door.

Guide to the appliance

This appliance conforms to current

safety requirements. Inappropriate

use can, however, lead to personal

injury and damage to property.

To avoid the risk of accidents and

damage to the appliance, please

read these instructions carefully

before using it for the first time. They

contain important information on its

safety, use and maintenance.

Keep these instructions in a safe

place and pass them on to any

future owner.

Correct application

This dishwasher is intended

exclusively for cleaning domestic

crockery and cutlery in a domestic

household. Using it for purposes other

than those for which it was designed,

as well as any alterations or

conversions to the appliance, would be

unauthorised and could be dangerous.

The manufacturer cannot be held liable

for damage resulting from improper or

incorrect use of the appliance.

This dishwasher is not intended for

use by persons (including children)

with reduced physical, sensory or

mental capabilities, or lack of

experience and knowledge, unless they

are supervised whilst using it or they

have been shown how to use it

correctly by a person responsible for

their safety.

Safety with children

This appliance is not a toy! To avoid

the risk of injury, keep children well

away and do not allow them to play in

or around the dishwasher, or to use the

controls. They will not understand the

potential dangers posed by it. They

should be supervised whenever you

are working in the kitchen. There is a

danger that children playing might shut

themselves in the dishwasher.

Older children may only use the

dishwasher when its operation has

been clearly explained to them and

they are able to use it safely,

recognising the dangers of misuse.

Keep children away from

detergents. Dishwasher detergents

contain irritant and corrosive

ingredients which can cause burning in

the mouth, nose and throat if

swallowed, or inhibit breathing. Keep

children away from the dishwasher

when the door is open. There could still

be detergent residues in the cabinet.

Consult a doctor immediately if your

child has swallowed or inhaled

detergent.

Warning and Safety instructions

Technical safety

Before setting up the appliance,

check it for any externally visible

damage. Under no circumstances

should you use a damaged appliance.

A damaged appliance could be

dangerous.

The dishwasher must only be

plugged into the electricity supply via a

suitable switched socket. The electrical

socket must be easily accessible after

the dishwasher has been installed so

that it can be disconnected from the

electricity supply at any time. (See

"Electrical connection").

There must be no electrical sockets

behind the dishwasher. Danger of

overheating and fire risk if the

dishwasher were to be pushed up

against a plug.

The dishwasher must not be

installed under a hob. The high radiant

temperatures which are sometimes

generated by a hob could damage the

dishwasher. For the same reason it

should not be installed next to open

fires or other appliances which give off

heat, such as heaters etc.

Do not connect the dishwasher to

the mains supply until it has been fully

installed.

Before connecting the appliance,

check that the connection data on the

data plate (voltage and connected

load) match the mains electricity

supply. If in any doubt, consult a

qualified electrician.

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system. It is

most important that this basic safety

requirement is present and regularly

tested and where there is any doubt the

electrical system in the house should

be checked by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

Do not connect the appliance to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).

Warning and Safety instructions

This appliance may only be installed

in mobile installations such as ships if a

risk assessment of the installation has

been carried out by a suitably qualified

engineer.

The plastic housing of the water

connection contains an electrical

component. The housing must not be

dipped in water.

There are live wires in the water inlet

hose. Never cut the water inlet hose,

even if it is too long.

The integrated Waterproof System

offers protection from water damage,

provided the following conditions are

met:

– The dishwasher is correctly installed

and plumbed in.

– The dishwasher is properly

maintained and parts are replaced

where necessary.

– The stopcock has been turned off

when the appliance is not used for a

longer period of time (e.g. during

holidays).

The Waterproof system will work even if

the appliance is switched off. However,

the appliance must remain connected

to the electricity supply.

A damaged appliance could be

dangerous. If the dishwasher gets

damaged, switch it off at the mains and

call your Miele Dealer or the Miele

Service Department.

Unauthorised repairs could result in

unforeseen dangers for the user, for

which Miele cannot accept liability.

Repairs should only be undertaken by a

Miele approved service technician.

Faulty components must only be

replaced by genuine Miele original

spare parts. The manufacturer can only

guarantee the safety of the appliance

when Miele replacement parts are

used.

Always disconnect the dishwasher

from the electrical supply for

maintenance work (switch off at the wall

socket and remove the plug).

If the connection cable is damaged

it must be replaced with a Miele cable

by a Miele approved service technician

only.

In countries where there are areas

which may be subject to infestation by

cockroaches or other vermin, pay

particular attention to keeping the

appliance and its surroundings in a

clean condition at all times. Any

damage which may be caused by

cockroaches or other vermin will not be

covered by the guarantee.

Warning and Safety instructions

Installation

The dishwasher must be installed

and connected in compliance with the

installation diagram supplied.

The dishwasher must be correctly

aligned to ensure problem-free

operation.

In order to ensure stability,

built-under and integrated dishwashers

must only be installed under a

continuous worktop which is secured to

adjacent cabinetry.

If you want to convert your

freestanding dishwasher to a

built-under ("U") model, you will need to

order the appropriate conversion kit. If

you remove the existing plinth, you

must replace it with a U-model plinth.

This is necessary to avoid the risk of

injury caused by protruding metal

parts.

Correct use

Do not use solvents in the

dishwasher. Danger of explosion.

Do not inhale or ingest dishwasher

detergent. Dishwasher detergents

contain irritant or corrosive ingredients

which can cause burning in the nose,

mouth and throat if swallowed, or inhibit

breathing. Consult a doctor immediate

ly if detergent has been swallowed or

inhaled.

Avoid leaving the door open

unnecessarily, as you could trip over it.

Do not sit or lean on the opened

door. This could cause the dishwasher

to tip and be damaged, and you could

get injured.

Only use detergent and rinse aid

formulated for domestic dishwashers.

Do not use washing-up liquid.

Do not use commercial or industrial

detergents as these may cause

damage, and there is a risk of severe

chemical reaction.

Do not fill the rinse aid reservoir with

powder or liquid detergent. This will

cause serious damage to the reservoir.

Warning and Safety instructions

Inadvertently filling the salt reservoir

with powder or liquid dishwasher

detergent will damage the water

softener. Make sure you have picked

up the correct packet of dishwasher

salt before filling the salt reservoir!

Please only use special coarse

grained dishwasher salt for reactivation,

as other salts may contain insoluble

additives which can impair the

functioning of the softener.

In an appliance with a cutlery basket

(depending on model) cutlery is

cleaned and dried more efficiently if

placed in the basket with the handles

downwards. However, to avoid the risk

of injury, place knives and forks etc.

with the handles upwards.

Plastic items which cannot withstand

being washed in hot water, such as

disposable plastic containers, or plastic

cutlery and crockery should not be

cleaned in the dishwasher. The high

temperatures in the dishwasher may

cause them to melt or lose shape.

On models with "Delay start", make

sure that the dispenser is dry before

adding detergent. Wipe dry if

necessary. Detergent will clog if poured

into a damp dispenser and may not be

thoroughly dispersed.

Accessories

Only use genuine Miele spare parts

and accessories with this appliance. If

spare parts or accessories from other

manufacturers are used, this will

invalidate the guarantee, and Miele

cannot accept liability.

Disposal of your old

dishwasher

Make the door lock inoperative so

that children cannot accidentally shut

themselves in. Make appropriate

arrangements for the disposal of the

appliance.

The manufacturer cannot be held

liable for damage caused by

non-compliance with these Warning

and Safety instructions.

Warning and Safety instructions

Disposal of the packing

material

The transport and protective packing

has been selected from materials which

are environmentally friendly for disposal

and can normally be recycled.

Ensure that any plastic wrappings,

bags, etc. are disposed of safely and

kept out of the reach of babies and

young children. Danger of suffocation.

The packaging consists of the following

materials:

Outer packaging:

– Corrugated cardboard made from up

to 100% recyclable material,

or: Polyethylene (PE) shrink wrap

– Polyproplylene (PP) strapping

Inner packaging:

– Chlorine and fluorine free expanded

polystyrene (EPS)

–

Base, lid frame and support battens

made from untreated natural wood

from renewable forests.

–

Polyethylene (PE) protective wrap

Rather than just throwing these

materials away, please ensure they are

recycled.

Disposal of your old appliance

Electrical and electronic appliances

often contain materials which, if

handled or disposed of incorrectly,

could be potentially hazardous to

human health and to the environment.

They are, however, essential for the

correct functioning of your appliance.

Please do not therefore dispose of it

with your household waste.

Please dispose of it at your local

community waste collection/recycling

centre or contact your Dealer for

advice. Ensure that it presents no

danger to children while being stored

for disposal.

To enable sorting by type of plastic for

recycling, all plastic parts of the

appliance are labelled with international

standard symbols.

Caring for the environment

Energy saving washing

This dishwasher is exceptionally

economical in its use of water and

electricity. You can make the most of

your appliance by following these tips:

If your household water system is

suitable, this dishwasher can be

connected to a hot water supply for

further economies. If the water is

heated by solar panels, for example,

this would be energy efficient.

However, if your water is heated by

electricity we would recommend

connection to cold water.

^ For most economical dishwashing,

make full use of the baskets without

overloading the dishwasher.

^ Choose the programme to suit the

type of crockery being washed and

the degree of soiling.

^ Select the Energy save programme

for energy-saving dishwashing.

Follow the detergent manufacturer's

recommendations on detergent

dosage.

When using powder or liquid

detergent, you can use

less

detergent if baskets are only half full.

Caring for the environment

To open the door

^ Pull the handle.

If the door is opened during operation

all functions are automatically

interrupted.

To close the door

Push the baskets right in.

Then lift the door upwards and push

until it clicks into position.

Before using for the first time

Water softener

In order to achieve good cleaning

results, the dishwasher needs to

operate with soft water. Hard water

results in the build-up of calcium

deposits on crockery and in the

dishwasher.

Mains water with a hardness level

higher than 0.7 mmol/l (4 °d – German

scale) needs to be softened. This takes

place automatically in the integrated

water softener.

–

The water softener requires

dishwasher salt.

– The dishwasher must be

programmed for the water hardness

in your area.

– Your local water authority will be able

to advise you of the water hardness

level in your area.

Where the water hardness fluctuates

e.g. between 6.7 - 9.0 mmol/l (37 -

50 °d German scale) always

programme the dishwasher to the

higher value (9.0 mmol/l in this

example).

In the event of a fault, it will help the

service technician if you know the

hardness of your local water supply.

Enter the water hardness below:

mmol/l or °d

The dishwasher is programmed at

the factory for a water hardness level

of 2.7 mmol/l (15 °d).

If this setting corresponds to the

hardness of your water you do not need

to do anything more.

If your water is harder or softer, you will

need to programme the water hardness

level. See following section.

Before using for the first time

To programme the water hardness

level

Each time a button is pressed, one of

the indicator lights will flash and light

up in the control panel. However, only

the indicator lights mentioned in the

following programming process stages

are significant.

The programming procedure can be

cancelled at any time by pressing the

Off button V. The procedure can

then be re-started from the beginning

again.

^ Switch the dishwasher off using the

Off button V.

^ Press the programme selector button

in, and whilst holding it in switch

the dishwasher on using the On

button U.

Keep the programme selector button

pressed in until the lower right hand

programme indicator comes on.

If this does not happen, start the

procedure from the beginning again.

Press the Turbo/Combi tabs button

twice.

The Combi tabs indicator light will flash

briefly twice at intervals.

The characters "p15" will flash one

after the other in the display.

This means that the water hardness

level has been set at 15 °d (2.7 mmol/l)

(factory setting).

The value which has been set for the

water hardness is shown as a figure

after the "p" in the display (see the

following chart).

Use the programme selector button to

select the value which corresponds to

your water hardness level.

Each press on the button moves you up

a level. When the highest water

hardness level is reached, the setting

starts from the beginning again.

^ Switch the dishwasher off with the Off

button V.

Before using for the first time

°d

German

scale

mmol/l °f Value

displayed

37-45

46-60

61-70

0.2

0.4

0.5

0.7

0.9

1.1

1.3

1.4

1.6

1.8

2.0

2.2

2.3

2.5

2.7

2.9

3.1

3.2

3.4

3.6

3.8

4.0

4.1

4.3

4.5

4.7

4.9

5.0

5.2

5.4

5.6

5.8

5.9

6.1

6.3

6.5

6.7-8.1

8.3-10.8

11.0-12.6

67-81

83-108

110-126

To call up the water hardness

level in the display

Switch the dishwasher off with the Off

button V.

Press the programme selector button

in, and whilst holding it in switch

the dishwasher on using the On

button U.

Keep the programme selector button

pressed in until the lower right hand

programme indicator comes on.

Press the Turbo/Combi tabs button

twice.

The Combi tabs indicator light will flash

briefly twice at intervals.

Characters will flash in sequence in the

display.

The figure(s) after the "p" is the value for

the water hardness level which has

been set (see chart).

^ Switch the dishwasher off with the Off

button V.

Before using for the first time

Miele branded products are available

from the Miele Spare Parts

Department or via the internet at

www.miele-shop.com.

Before using the appliance for

the first time you require:

–

Approx. 1 kg dishwasher salt,

–

Domestic dishwasher detergent,

–

Rinse aid formulated for domestic

dishwashers.

Every dishwasher is tested at the

factory.

There will be residual water in the

appliance from this test. It is not an

indication that it has been used

previously.

Filling the salt reservoir

If you use combination products

which have salt in them in your

dishwasher, such as "3 in 1" or

"4 in 1" products, you should still

add salt in order to achieve optimum

results and to ensure that the water

softener continues to function.

Selecting the Combi tabs option

reduces salt consumption to

between

and

of the normal

amount.

If the water in your area is very soft

and constantly lower than

0.7 mmol/l (4 °d - German scale)

you do not need to add dishwasher

salt. However, the water softener

must still be programmed to

correspond to the water hardness

level in your area.

Inadvertently filling the salt

reservoir with powder or liquid

dishwasher detergent will damage

the water softener. Make sure you

have picked up the correct packet

of dishwasher salt before filling the

salt reservoir!

Only use special coarse grained

dishwasher salt for reactivation. Do

not use other salts such as cooking

salt, agricultural grade or gritting

salt. These may contain insoluble

additives which can impair the

functioning of the water softener.

Before using for the first time

When filling the salt reservoir only

open the door halfway to ensure

that all the salt gets into the reservoir.

^ Press the button on the lid of the salt

reservoir in the direction of the arrow

until the flap springs open.

Lift up the funnel.

Do not fill the salt reservoir with

water.

^ Add salt only until the reservoir is full

or until water runs out of the opening.

The salt reservoir holds approx. 1 kg

of salt, depending on the brand

used.

Do not add any more than 1 kg of

salt.

As the salt reservoir is filled, displaced

water may overflow.

Clean any excess salt from around

the reservoir opening, and then close

the flap.

Run the Quick wash programme im

mediately (without any crockery in

the dishwasher, and without selecting

the Turbo extra option) to remove any

traces of salt from the cabinet.

Before using for the first time

Salt indicator

Fill the salt reservoir with dishwasher

salt when the salt indicator light

comes on. (If it comes on during a

programme, wait until the end of the

programme).

After the reservoir has been filled, the

water softener is automatically

reactivated the next time the

dishwasher is run. The salt refill

indicator may still be illuminated during

this process. It will go out once the salt

concentration has reached the correct

level.

The salt indicator light will not come on

if the dishwasher is programmed for a

water hardness level of below

0.7 mmol/l (4 °d German scale).

After filling the salt reservoir, run

the Quick wash programme immedi-

ately (without any crockery in the

dishwasher, and without selecting

the Turbo extra option) to remove

any traces of salt from the cabinet.

Before using for the first time

Rinse aid

Rinse aid is necessary to ensure water

does not cling and leave marks on

crockery during the drying phase and

helps crockery dry faster after it has

been washed.

Rinse aid is poured into the storage

reservoir and the amount set is

dispensed automatically.

Inadvertently filling the rinse aid

reservoir with powder or liquid

detergent always causes serious

damage to the reservoir. Only pour

rinse aid formulated for domestic

dishwashers into the reservoir.

Alternatively, it is possible to use

– Household vinegar with a max. 5%

acid content

– Liquid citric acid up to 10% acid

content.

The resulting rinsing and drying quality

will not, however, be as good as when

rinse aid is used.

Do not use vinegar with a higher

acid content (e.g. vinegar essence

25% acid). This would damage the

dishwasher.

If you only ever use combination

products containing rinse aid in your

dishwasher, you do not need to add

rinse aid.

Adding rinse aid

^ Press the button on the lid of the

rinse aid reservoir in the direction of

the arrow until the flap springs open.

Before using for the first time

Add rinse aid only until it is visible in

the opening.

The rinse aid reservoir holds approx.

110 ml.

^ Close the flap firmly so that it clicks

into place. Otherwise water can enter

the rinse aid reservoir during a

programme.

^ Wipe up any spilled rinse aid. This

prevents over-foaming occurring

during the next programme.

Rinse aid indicator

When the light comes on the reservoir

contains sufficient rinse aid for2-3

programmes only.

Add rinse aid in plenty of time.

If the Combi tabs function has been

selected, the rinse aid indicator light

will not come on (see "Additional

functions, Turbo/Combi tabs").

Before using for the first time

Setting the rinse aid dosage

The rinse aid dosage can be set from

approx. 0-6 ml. It is set to a

recommended setting of approx. 3 ml

at the factory.

If the Adjust sensor wash function has

been activated, the amount of rinse aid

dispensed could be higher than that set

in the Sensor wash programme.

If spots appear on crockery and

glassware:

Increase the rinse aid dosage.

If clouding or smearing appears on

crockery and glassware:

^ Decrease the rinse aid dosage.

^ Switch the dishwasher off with the Off

button V.

^ Press the programme selector button

in, and whilst holding it in switch

the dishwasher on using the On

button U.

Keep the programme selector button

pressed in until the lower right hand

programme indicator comes on.

If this does not happen, start the

procedure from the beginning again.

Press the Turbo/Combi tabs button

three times.

The Combi tabs indicator light will flash

briefly three times at intervals.

p3will flash in the Time display.

This means that the rinse aid dosage

has been set to 3 ml at the factory.

The dosage set will show in the Time

display after the p.

Use the programme selector button

to select the rinse aid dosage you

want.

The dosage amount alters each time

you press the button.

The programmed rinse aid dosage is

now stored in memory.

Switch the dishwasher off with the Off

button V.

Before using for the first time

Note

Remove coarse food residues from

crockery.

There is no need to rinse items under

running water.

Do not wash items soiled with

ash, sand, wax, lubricating grease

or paint in the dishwasher.

These substances will damage the

dishwasher.

Crockery can be loaded anywhere in

the baskets, but the following notes

should be observed:

– Do not place crockery and cutlery

inside other pieces where they may

be concealed.

– Load the crockery so that water can

access all surfaces. This ensures

that they get properly cleaned.

– Make sure that all items are securely

positioned.

–

Hollow items such as cups, glasses,

pans, etc. must be inverted in the

basket.

–

Tall, narrow, hollow items, e.g.

champagne glasses, should be

placed in the centre of the basket to

ensure better water coverage.

–

Wide based items should be placed

at an angle so that water can run off

them freely.

–

The spray arms must not be blocked

by items which are too tall or hang

through the baskets.

If in doubt, test for free movement by

manually rotating the spray arms.

–

Make sure that small items cannot

fall through the holders in the

baskets. Small items, e.g. lids,

should therefore be placed in the

cutlery tray or cutlery basket

(depending on model).

Some foodstuffs may contain natural

dyes, e.g. carrots, tomatoes or

ketchup. Plastic items in the

dishwasher may discolour if large

quantities of these foodstuffs find

their way into the appliance on the

crockery. The stability of plastic

items is not affected by this

discolouration.

Loading the dishwasher

Items not suitable for

dishwashers:

–

Wooden cutlery and crockery or

items with wooden parts: these may

discolour and fade. The glue used in

these items is not dishwasher-proof

and wooden handles may come

loose after being washed in a

dishwasher.

–

Craft items, antiques, valuable vases

and decorative glassware are also

not suitable for dishwashers.

–

Plastic items which are not heat

resistant: the high temperatures in

the dishwasher may cause them to

melt or lose shape.

– Copper, brass, tin and aluminium

items may discolour or become matt.

– Colours painted over a glaze may

fade after a number of washes.

– Clouding may occur on glasses after

frequent washing. Do not wash

delicate glassware, or glassware

containing lead crystal in a

dishwasher.

We recommend:

–

When purchasing new crockery and

cutlery, make sure they are

dishwasher-proof.

–

If delicate glassware is washed in the

dishwasher ensure that only very low

temperatures are used (see

programme chart), or a special

glass-care programme is used

(depending on model). This will

reduce the risk of clouding.

–

If in doubt, wash delicate glassware

by hand.

Please note

Silverware previously cleaned with a

silver polish may still be damp or

spotted at the end of a programme,

where water has not run off smoothly. It

may need to be rubbed dry with a soft

cloth.

Silver which has been in contact with

foods containing sulphur can discolour.

These include egg yolk, onions,

mayonnaise, mustard, pulses, fish, fish

brine and marinades.

Aluminium components (e.g.

grease filters) must not be cleaned

with caustic alkaline commercial or

industrial cleaning agents. These

may damage the material, or in

extreme cases, cause a severe

chemical reaction. See section

"Adding detergent" for information

on suitable detergents.

Loading the dishwasher

Upper basket

For safety reasons, do not

operate the dishwasher without the

upper and lower baskets in place.

^ Use the upper basket for small,

lightweight and delicate items such

as cups, saucers, glasses, dessert

bowls, etc. Shallow pans or casserole

dishes can also be placed in the

upper basket.

Long items such as soup ladles,

mixing spoons and long knives

should be placed lying down across

the front of the upper basket.

Hinged cup rack

To make room for tall items, raise the

rack upwards.

Positioning rail (depending on model)

Glasses can be arranged along the

positioning rail to give them some

support during the programme.

^ Raise the rail, and lean the glasses

against it.

The positioning rail can be flipped over

to the middle of the basket for easy

sorting and removing of crockery.

Loading the dishwasher

Support rail (depending on model)

This support is designed to hold tall

glasses and glasses with stems

securely.

^ Lower the support and lean tall

glasses against it.

^ You can also remove a section of the

cutlery tray to make more room for

tall glasses.

Loading the dishwasher

Adjusting the upper basket

In order to gain more space for taller

pieces of crockery in the bottom or

upper basket, the upper basket can be

adjusted on three levels with 2 cm

between each level.

The upper basket can also be set at an

angle with one side high and the other

side low. This can be useful to help

prevent water collecting in deep dishes

etc. Ensure, however, that the basket

can be inserted smoothly into the

cabinet. It is better to adjust the basket

before loading it.

^ Pull out the upper basket.

To raise the upper basket:

Pull the basket up until it clicks into

place.

To lower the upper basket:

Pull upwards on the levers at either

side of the upper basket.

Adjust the basket to the desired

height and then push the levers

securely back down into position.

Depending on the setting of the upper

basket, the following plate dimensions

can be accommodated.

Dishwasher with cutlery tray

(see data plate for model number)

Upper

basket

level

Plate C in cm

Upper basket Lower

basket

G1XXX G2XXX

Top 15 19 31

Middle 17 21 29

Bottom 19 23 27

Dishwasher with cutlery basket

(see data plate for model number)

Upper

basket

level

Plate C in cm

Upper basket Lower

basket

G1XXX G2XXX

Top 20 24 31

Middle 22 26 29

Bottom 24 28 27

Loading the dishwasher

Lower basket

For larger and heavier items such as

plates, serving platters, saucepans,

bowls, etc.

Small items such as saucers can also

be placed in the lower basket.

Do not place delicate glassware in

the lower basket.

Dishwashers with cutlery tray

Dishwashers with cutlery basket

Hinged spikes

The spikes are used for washing plates

and saucers.

Both rows of spikes at the back can be

lowered to make more room for large

items, e.g. pots, pans and dishes.

Press the yellow lever downwards a,

and then lower the spikes b.

Loading the dishwasher

Removable spiked insert

You can remove the spiked insert to

make more room for larger items of

crockery, e.g. a large, flat pot, or

another type of insert.

To remove the insert a

^ Pull it upwards by the handle as

shown.

To replace the insert b

Fit the insert into the lower basket

with the hooks going under the long

cross-piece as illustrated.

Press down on the handle until the

insert is held securely in position.

Removable vario insert

(depending on model)

The vario insert is used for washing

cups, glasses, plates, saucers, pots

and pans.

^ The cup rack can be raised to make

more room for tall items.

^ Stem glassware e.g. wine glasses or

champagne flutes can be leaned

against the cup rack or suspended

from it.

Loading the dishwasher

To remove the insert a:

^ Pull upwards by the handle to

remove.

To replace the insert b:

^ Position the vario insert in the left

hand side of the lower basket.

^ Fit the insert into the lower basket

with the hooks going under the long

cross-piece as illustrated.

Press down on the insert until it clicks

into position

Bottle holder (depending on model)

The bottle holder can be used to wash

narrow items, e.g. milk and baby

bottles.

^ It can be inserted into the bottom

basket in more than one place. See

the areas marked in white in the

illustration.

Do not place a bottle holder in the

corners. Water will not be able to

access the bottles properly, and they

will not get clean.

Loading the dishwasher

Cutlery

Cutlery tray (depending on model)

^ Arrange the cutlery in the tray as

shown.

To make unloading much easier,

cutlery should be grouped in zones,

one for knives, one for forks, one for

spoons, etc.

Spoon heads should be placed in

contact with at least one of the serrated

retainers on the base of the cutlery tray

to ensure that water runs off them

freely.

The upper spray arm must not be

blocked by items which are too big

(e.g. cake slices).

The cutlery tray inserts are removable.

For example, you can remove one

insert to make room for larger items of

crockery in the upper basket.

If spoon handles do not fit between the

holders, then lay them the other way

round.

Loading the dishwasher

Cutlery basket (depending on model)

^ To avoid the risk of injury, knives and

forks should be placed with the

handles upwards in the basket.

However, cutlery placed handle

down in the basket will come out

cleaner and drier.

^ Place small spoons in the individual

slots to either side of the cutlery

basket.

Cutlery insert for the cutlery basket

Use the insert supplied for heavily

soiled spoons.

The insert separates the items so that

they can be more easily accessed by

water.

Fit it into the cutlery basket if

required.

Insert cutlery with the handles facing

downwards, and distribute them

evenly along the insert.

Loading the dishwasher

Detergent

Only use detergents formulated

for domestic dishwashers. Do not

use washing-up liquid.

Miele branded dishwasher cleaning

products are available from the Miele

Spare Parts Department or via the

Internet at www.miele-shop.com.

Active ingredients

Modern detergents contain various

active ingredients, the most important

of which are:

– Phosphates to prevent calcification.

– Alkalis to aid removal of dried on

soiling.

– Enzymes to break down starch and

dissolve protein.

– Oxygen based bleaching agents to

remove coloured stains (e.g. tea,

coffee, tomato sauce).

Most dishwasher detergents contain

phosphates and are mildly alkaline with

enzymes and oxygen based bleaching

agents. Phosphate free products are

rare.

Types of detergent:

–

Powder and liquid gel detergents.

These detergents allow you to adjust

the amount dispensed according to

the size of load and level of soiling.

–

Tab detergents. These are suitable

for most levels of soiling.

A variety of combination products is also

available (see section "Additional

functions, Combi-tab", depending on

model).

In addition to detergent, combi tabs

contain rinse aid and salt substitutes.

Combi tabs are available as "3 in 1" or,

when they also contain other components

such as glass and stainless steel

protective additives and enhanced

cleaning power, as "4 in 1", "5 in 1" etc.

Refer to the manufacturer's packaging as

to whether the combi tabs are suitable for

the water hardness level in your area.

Please note that the cleaning and drying

results of tab detergents can vary greatly.

For optimum cleaning and drying

results use Miele dishwasher

detergent and add Miele salt and

Miele rinse aid separately.

Dispensing

^ Follow the dosage recommended on

the packaging.

Unless directed otherwise, use one

detergent tab or add 20 to 30 ml

detergent in compartment II,

depending on the level of soiling.

With very heavy soiling you can also

add a small amount of detergent to

compartment l (see "Programme

chart").

Do not use tabs with the "Quick wash"

programme, as they will not dissolve

properly.

Failure to dispense the

recommended amount of detergent

may impair cleaning results.

Operation

Avoid inhalation of powder

detergents and do not ingest

dishwasher detergent. Dishwasher

detergents contain irritant or corrosive

ingredients which can cause burning

in the nose, mouth and throat if

swallowed, or inhibit breathing.

Consult a doctor immediately if

detergent has been swallowed or

inhaled.

Keep detergent and other household

agents out of the reach of children at

all times. Keep children away from the

dishwasher when the door is open.

There could still be detergent residues

in the cabinet. To avoid the danger of

children coming into contact with the

dishwasher detergent, only add

detergent just before starting the

programme and close the door,

activating the child safety lock (if your

dishwasher is fitted with one).

Adding detergent

Press the opening catch on the

detergent dispenser. The flap will

spring open.

The flap is always open at the end of a

programme.

^ Add the required amount of

detergent and close the flap.

^ Make sure that the detergent

packaging is properly closed after

use to avoid it getting damp and

becoming lumpy.

For information

Compartment I holds max. 10 ml,

Compartment II holds max. 50 ml.

There are markings in compartment II

to assist with dispensing: 20, 30. The

marks indicate a level of approx. 20 or

30 ml when the door is open in a

horizontal position.

Operation

Switching on

Open the stopcock, if it is closed.

Open the door.

Make sure the spray arms are not

obstructed.

Switch the dishwasher on with the On

button U.

The On indiciator light U and the

indicator for the last used programme

light up.

Selecting a programme

Choose your programme according to

the type of load and how dirty it is.

The different programmes and their

uses are described in the Programme

chart later on in this booklet.

Starting a programme

Select the programme required with

the programme selector button.

The indicator light for the programme

selected lights up.

The programme duration will appear in

hours and minutes in the display.

If the Turbo and/or Combi tabs

functions have been selected, the

corresponding indicator(s) will also light

up.

You can now select an additional

function (see "Additional functions").

^ Start the programme by closing the

door.

The In-operation indicator light comes

on to show that a programme has been

started.

A programme can only be cancelled

in the first few minutes. Otherwise

the programme must continue to the

end so that important programme

stages (e.g. reactivating the water

softener) are not omitted.

Operation

Time display

The duration of the programme

selected appears in hours and minutes

in the Time display before the

programme begins. During the

programme, the time left until the end of

the programme is displayed.

The time displayed may vary with the

same programme. This can be due to

the water temperature at each intake,

the reactivation cycle, the amount of

crockery and how dirty it is.

When a programme is selected for the

first time, the display shows an average

time for a cold water intake.

The times shown in the Programme

chart refer to standard test loads and

temperatures.

Each time a programme is run, the

electronic unit adjusts the programme

duration according to the amount of

crockery and the temperature of the

incoming water.

To save energy, the time display goes

out after a few minutes if you do not

press any buttons during this time.

Press any button (apart from the Off

button V) to switch the time display

back on again.

At the end of a programme

At the end of a programme, the

In-operation indicator light will be

visible flashing slowly with the door

shut.

When the door is opened a "0" will

appear in the Time display.

You can now empty the dishwasher.

The In-operation indicator light will go

out one hour after the end of the

programme.

To prevent the risk of steam

damage to the worktop edging

above the dishwasher, it is

advisable to leave the door closed

until you are ready to unload the

crockery. Alternatively you can open

the door fully until the crockery is

cool enough to unload. Do not leave

the door only partially open.

Operation

Switching off

At the end of a programme:

Open the door.

Switch the dishwasher off with the Off

button V.

The dishwasher will continue to use

electricity until it is switched off with

the Off button V.

If the dishwasher is not going to be

used for a longer period of time, e. g.

whilst on holiday, the stopcock should

be turned off.

Unloading the dishwasher

Dishes tend to break and chip more

easily when they are hot.

Allow the dishes to cool until they are

comfortable enough to handle before

unloading them.

If you open the door fully after switching

off, the dishes will cool much faster.

First unload the lower basket, then the

upper basket and finally the cutlery tray

(depending on model).

This will prevent water drops from the

upper basket and cutlery tray from

falling onto the dishes in the lower

basket.

Operation

Interrupting a programme

A programme is interrupted as soon as

the door is opened.

When the door is closed again, the

programme will continue from the point

it was at before the door was opened.

Water in the dishwasher may be

hot. Danger of scalding.

Only open the door if absolutely

necessary and exercise extreme

caution when doing so. Before

closing the door again, leave it ajar

for approx. 20 seconds. This will

enable the temperature in the wash

cabinet to settle. Then close the

door firmly, making sure that it clicks

into place.

Changing a programme

If the detergent dispenser flap has

already opened, do not change the

programme.

If a programme has already started and

you wish to change it, proceed as

follows:

Open the door.

Press the Off button V.

Press the On button U.

Select the programme required with

the programme selector button.

^ Start the programme by closing the

door.

The In-operation indicator light comes

on to show that a programme has been

started.

Operation

Turbo/Combi tabs

The Turbo/Combi tabs button is used

for selecting the Turbo and Combi tabs

options.

Open the door.

Switch the dishwasher on with the On

button U.

The On indicator light U comes on.

Press the Turbo/Combi tabs button

repeatedly until the indicator light for

the option you want comes on.

The option selected is active on all

programmes until the setting is

changed.

^ You can now start the programme.

Turbo

The Turbo function is used to reduce

the duration of programmes in which

this function is available.

In order to achieve optimum cleaning

results, consumption rates are

increased with this option.

If a full programme is not yet required,

the Turbo function can be used in

conjunction with the Quick wash

programme to rinse off dirty crockery.

Combi tabs

To ensure excellent results you can

programme your dishwasher for the

type of detergent you are using.

The Turbo/Combi tabs button is used

here for selecting between standard

detergents (powder, liquid and 2 in 1

tabs) and combination detergents

(3in1/4in1tabs etc.).

The programme sequence is then

adapted to suit the type of detergent

selected. Depending on the

programme, the duration can be

considerably longer.

If the Combi tabs indicator does not

light up, the dishwasher is set for stan-

dard detergent.

If the Combi tabs indicator lights up,

the programme sequence will be

adapted to suit detergents that contain

rinse aid and salt as well as other

components where applicable.

The rinse aid dispenser and the rinse

aid indicator light are deactivated.

Salt consumption for reactivating the

water softener is reduced to

the normal amount.

Do not select the Combi tabs option if

your water hardness level is above

3.8 mmol/l or 21°d.

Follow the detergent manufacturer's

instructions.

The cleaning and drying

performance of these types of

detergent can vary enormously.

Additional functions

Delay start

The start time of a programme can be

delayed, e.g. to benefit from economy

rates of electricity. A delay start time of

between 30 minutes and 24 hours can

be selected.

With a delay start time of between 30

minutes and 9 hours 30 minutes, the

delay is set in 30 minute stages. For 10

hours or more, it is set in one hour

stages.

When using the Delay start function,

make sure that the detergent

compartment is dry before adding

detergent. Wipe dry with a cloth if

necessary. If the compartment is

wet, powder detergent can become

lumpy and stick to the dispenser,

with the result that it is not fully

dispensed.

Do not use liquid detergent when

selecting Delay start, as it can run

into the dishwasher before it is

required.

Open the door.

Switch the dishwasher on with the On

button U.

The On indicator light U comes on.

Select the programme required with

the programme selector button.

Press the , button.

The last Delay start time used will

appear in the Time display. The Delay

start indicator light , comes on.

Set the required time using the ,

button.

If you keep the , button pressed in the

time will count up to 24^ automatically.

To start again with 30 minutes, press

the Delay start button twice.

^ Close the door.

Additional functions

The time starts counting down until the

programme start time: in 1 hour steps

for delay start periods of over 10 hours,

and in minutes for delay start periods of

under 10 hours.

At the end of the delay period, the

programme selected begins

automatically. The time left for a

programme to run then shows in the

display, the Delay start indicator light

, goes out, and the indicator light for

the programme selected comes on.

How the Delay start time is shown in

the Time display:

up to 59 minutes:

e.g. 30 minutes = 30

between 1 hour and 9 hours 30

minutes:

e.g. 5 hours = 5.00

10 hours and over:

e.g. 15 hours = 15^

Starting a programme before the

Delay start period has elapsed:

A programme can be started before the

Delay start period has elapsed.

Proceed as follows:

Open the door.

Press the Off button V.

Press the On button U.

Select the programme required with

the programme selector button.

Close the door.

The In-operation indicator lights up.

The programme starts.

Additional functions

Buzzer

An audible tone sounds at the end of

the programme or if there is a fault.

You will hear the buzzer at the end of a

programme in bursts of five with a short

pause in between. The buzzer will

continue to sound for up to an hour if

you do not switch the dishwasher off.

In the event of a fault, the buzzer will

sound continuously for up to two

minutes if you do not switch the

dishwasher off or correct the fault.

The buzzer is activated as standard at

the factory.

You can deactivate the buzzer at the

end of a programme if you wish. The

buzzer will still sound if there is a fault,

even if it has been deactivated.

^ Open the door.

^ Switch the dishwasher off with the Off

button V.

^ Press the programme selector button

in, and whilst holding it in switch

the dishwasher on using the On

button U.

Keep the programme selector button

pressed in until the lower right hand

programme indicator comes on.

If this does not happen, start the

procedure from the beginning again.

Press the Turbo/Combi tabs button

four times.

The Combi tabs indicator light will flash

briefly four times at intervals.

The message flashing in the Time left

display shows whether the buzzer at

the end of the programme is activated

or deactivated.

–

"p 1": the buzzer is activated

–

"p0": the buzzer is deactivated

To change the setting, press the

programme selector button.

The setting is now stored in memory.

^ Switch the dishwasher off with the Off

button V.

Additional functions

Factory default setting

If you have altered any settings from

the factory default, you can re-set them

back to the factory default settings as

follows:

Open the door.

Switch the dishwasher off with the Off

button V.

Press the programme selector button

in, and whilst holding it in switch

the dishwasher on using the On

button U.

Keep the programme selector button

pressed in until the lower right hand

programme indicator comes on.

If this does not happen, start the

procedure from the beginning again.

^ Press the Turbo/Combi tabs button

twelve times.

The Combi tabs indicator light will give

one long flash and two brief flashes at

intervals.

The flashing sequence in the Time

display shows whether a setting other

than the factory default setting has

been set.

–

"p1": All settings are set to factory

default settings.

–

"p0": At least one setting has been

changed.

To reset to the factory default

settings, press the programme

selector button.

The setting is now stored in memory.

^ Switch the dishwasher off with the Off

button V.

Additional functions

Adjust Sensor wash

You can adjust the Sensor wash

programme so that it will remove

stubborn soiling in a lightly soiled load.

Open the door.

Switch the dishwasher off with the Off

button V.

Press the programme selector button

in, and whilst holding it in switch

the dishwasher on using the On

button U.

Keep the programme selector button

pressed in until the lower right hand

programme indicator comes on.

If this does not happen, start the

procedure from the beginning again.

^ Press the Turbo/Combi tabs button

five times.

The Combi tabs indicator light will flash

briefly five times at intervals.

The message flashing in the Time

display shows whether the Adjust

Sensor wash function is activated or

deactivated.

–

"p1": The Adjust Sensor wash

function is activated.

–

"p0": The Adjust Sensor wash

function is deactivated.

To change the setting, press the

programme selector button.

Switch the dishwasher off with the Off

button V.

Additional functions

Check your dishwasher regularly

(approx. every4-6months). This

way faults and problems can be

avoided.

Miele branded cleaning and

conditioning products are available

from the Miele Spare Parts

Department or via the internet at

www.miele-shop.com.

External surfaces of the

dishwasher are susceptible to

scratching.

Contact with unsuitable cleaning

agents can alter or discolour the

outer surfaces.

Cleaning the wash cabinet

The wash cabinet is largely

self-cleaning, provided that the correct

amount of detergent is always used.

If, however, there are limescale or

grease deposits in the cabinet, these

can be removed with a proprietary

dishwasher cleaner or conditioner.

Cleaning the door and the door

seal

Wipe the door seals regularly with a

damp cloth to remove food deposits.

When the dishwasher is being

loaded, food and drink residues may

drip onto the sides of the dishwasher

door.

These surfaces are outside the wash

cabinet and are not accessed by

water from the spray arms. Any

soiling should be wiped off these

surfaces before the door is closed.

Cleaning the reflector panel

The reflector panel for the In-operation

indicator light is situated in the

coverplate underneath the worktop.

^ The reflector panel should only be

wiped with a damp cloth or a suitable

cleaning agent designed for use on

plastic.

Cleaning and care

Cleaning the control panel and

door front

Remove any soiling immediately.

If not, it might become impossible to

remove and could cause the outer

surface to alter or discolour.

The control panel should only be

wiped with a damp cloth.

Clean the front using a damp Miele

microfibre E-cloth or with a sponge

and a solution of hot water and

washing-up liquid. Then dry with a

soft cloth.

To avoid damaging external

surfaces, do not use:

–

cleaning agents containing soda,

ammonia, acids or chlorides,

–

cleaning agents containing

descaling agents,

–

abrasive cleaning agents, e.g.

powder cleaners and cream

cleaners.

–

solvent-based cleaning agents,

–

stainless steel cleaning agents,

–

dishwasher cleaner,

– oven sprays,

– glass cleaning agents,

– hard, abrasive sponges and

brushes, e.g. pot scourers,

– sharp metal scrapers.

Cleaning and care

Cleaning the filters in the wash

cabinet

The filter combination in the base of the

wash cabinet retains coarse soil from

the suds solution, preventing it

accessing the circulation system and

re-entering the cabinet through the

spray arms.

The dishwasher must not be

used without all the filters in place.

Collection of coarse soil may cause the

filters to clog. The level of soiling and

time it takes before the filters need

cleaning will vary depending on use.

Check the condition of the filters

regularly and clean them if necessary.

^ Switch the dishwasher off.

Turn the handle anti-clockwise to

release the filter combination a.

^ Lift the filter combination out of the

dishwasher b. Remove any coarse

particles and rinse the filter well

under running water. Use a nylon

brush if necessary.

Cleaning and care

To clean the inside of the filter, the flap

must be opened:

^ Press catches a together in the

direction of the arrows as shown,

and open the filter b.

^ Rinse all the filters under running

water.

^ Then close the flap so that the catch

engages.

Replace the filter combination so that

it lies flat in the base of the wash

cabinet.

^ Then turn the handle clockwise, until

the arrows line up, to lock the filter

combination in place.

Take care when you are fitting

the filter combination that it is

secured in position correctly.

Otherwise coarse soil could get into

the circulation system and cause a

blockage.

Cleaning and care

Cleaning the spray arms

Particles of food can get stuck in the

spray arm jets and bearings. The spray

arms should therefore be inspected

and cleaned regularly (approx. every

4 - 6 months).

Switch the dishwasher off.

Remove the spray arms as follows:

Take out the cutlery tray (if your

dishwasher is fitted with one).

Push the top spray arm upwards to

engage the inner ratchet. Then

unscrew the spray arm.

Push the middle spray arms upwards

a to engage the ratchet. Then

unscrew the spray arm b.

Remove the lower basket.

^ Pull the lower spray arm firmly

upwards to remove it.

Use a pointed object to push food

particles into the spray arm jets.

Rinse thoroughly under running

water.

Replace the spray arms and check

that they rotate freely.

Cleaning and care

With the aid of the following guide, faults in the performance of the appliance,

some of which may result from incorrect operation can be put right without

contacting the Service Department.

Repairs should only be carried out by a suitably qualified and trained

person in strict accordance with current local and national safety regulations.

Unauthorised or incorrect repairs could cause personal injury or damage to the

appliance.

Technical problems

Problem Possible cause Remedy

The dishwasher does

not start.

The door is not properly

closed.

Push the door firmly shut.

The appliance is not

plugged in.

Insert the plug and switch on

at the socket.

The fuse has tripped. Reset or replace the fuse.

(Minimum fuse rating - see

data plate).

The appliance is not

switched on.

Press the On button U and

select a programme.

The dishwasher

stops during a

programme.

The fuse has tripped. Reset or replace the fuse.

After the programme

has started, the

In-operation indicator

light is not visible.

The reflector panel was

not correctly fitted.

Re-fit the reflector panel

correctly (see Installation

diagram).

Problem solving guide

Problem Possible cause Remedy

The In-operation

indicator is flashing

quickly.

The buzzer is sounding.

All the programme

indicators flash when

the door is open.

Fault code FXX shows

in the display.

There may be a

technical fault.

–

Clean the water inlet filter

and clean the drain pump

and non-return valve as

described in "Maintenance".

If this does not resolve the

problem,

–

switch the dishwasher off

with the Off button V.

After a few seconds:

–

Switch the dishwasher on.

–

Select the programme

required with the

programme selector button.

– Close the door.

If the indicator lights flash

again, there is a technical

fault.

– Call the Service

Department.

The drain pump works

even when the door is

open.

Fault F70:

The Waterproof

System has reacted.

– Close the stopcock.

– Call the Service

Department.

Problem solving guide

The dishwasher does not fill/drain

Problem Possible cause Remedy

The In-operation

indicator is flashing

quickly.

The buzzer is

sounding.

The Inlet/Drain

indicator flashes

when the door is

open.

The stopcock is

closed.

–

Open the stopcock fully.

The dishwasher

stops during a

programme.

The In-operation

indicator is flashing

quickly.

The buzzer sounds.

The Inlet/Drain

indicator flashes

when the door is

open.

Fault code FXX

shows in the

display.

Before rectifying the problem you

must:

– Switch the dishwasher off with the

Off button V.

Fault F12/F13:

Water intake is

restricted.

– Open the stopcock fully.

– Clean the water inlet filter (see

Maintenance).

– The water pressure at the intake is

lower than 30 kPa (0.3 bar).

Seek professional advice.

Fault F11:

Water outlet is

restricted, water

remains in the

wash cabinet at

the end of a

programme.

– Clean the filter combination. See

Cleaning and care.

–

Clean the drain pump. See

Maintenance.

–

Clean the non-return valve. See

Maintenance.

–

Remove any kink in the drain hose.

Problem solving guide

General problems

Problem Possible cause Remedy

The time display is

dark.

The time display has

switched off automatically

to save energy (Standby

mode).

Press any button (apart from

the Off button V).

The time display will light up.

The Salt indicator

light starts flashing

The salt reservoir has not

been closed properly.

Close the flap to the salt

reservoir properly.

The dishwasher

stops during a

programme.

The In-operation

indicator is flashing

quickly.

The buzzer sounds.

The Salt indicator

flashes when the

door is open.

Fault code F86

shows in the display.

The salt reservoir has not

been closed properly.

–

Switch the dishwasher off

with the Off button V.

–

Close the flap to the salt

reservoir properly.

– Start the programme

again.

Problem solving guide

Problem Possible cause Remedy

Detergent residue is left

in the dispenser at the

end of a programme.

The dispenser was still

damp when detergent

was added.

Make sure the dispenser is

dry before adding

detergent.

The detergent

dispenser lid cannot be

closed properly.

Clogged detergent

residue is blocking the

catch.

Clean the detergent from the

catch.

At the end of a

programme there is a

film of moisture on the

inside of the door and

the interior walls.

This is caused by the

drying system and does

not indicate a fault.

The moisture will dissipate

after a short while.

Water remains in the

wash cabinet at the end

of a programme.

Before rectifying the

problem you must:

– Switch the dishwasher off

with the Off button V.

The filter combination in

the wash cabinet is

clogged.

Clean the filter combination.

See Cleaning and care.

The drain pump or

non-return valve may be

blocked.

Clean the drain pump or the

non-return valve. See

Maintenance.

The drain hose is

kinked.

Remove any kink from the

drain hose.

Problem solving guide

Noises

Problem Possible cause Remedy

Knocking noise in the

wash cabinet.

A spray arm is knocking

against an item in a

basket.

Interrupt the programme,

and rearrange the items

which are obstructing the

spray arm.

Rattling noise in the

wash cabinet.

Items of crockery are

insecure in the wash

cabinet.

Interrupt the programme,

and rearrange the items of

crockery.

Knocking noise in the

water pipes.

This may be caused by

the on-site installation or

the cross-section of the

piping.

This has no influence on

dishwasher function. If in

doubt, contact a suitably

qualified plumber.

Problem solving guide

Unsatisfactory washing result

Problem Possible cause Remedy

The dishes are not

clean.

The dishes were not loaded

correctly.

See notes in Loading the

dishwasher

The programme was not

powerful enough.

Select a more intensive

programme. See Programme

chart.

There is some stubborn

soiling although most of the

crockery is only lightly soiled

(e.g. with tea stains).

Use the Adjust Sensor wash

function (see Additional

functions).

Not enough detergent was

dispensed.

Use more detergent, or

change your detergent.

Items are blocking the path

of the spray arms.

Rearrange the items so that

the spray arms can rotate

freely.

The filter combination in the

base of the wash cabinet is

not clean or is not correctly

fitted. This may cause the

spray arm jets to get

blocked.

Clean and/or fit the filter

combination correctly. Clean

the spray arm jets. See

Cleaning and care.

The non-return valve is open

and blocked. Dirty water has

flowed back into the wash

cabinet.

Clean the drain pump and

the non-return valve. See

Maintenance - Cleaning the

drain pump and non-return

valve.

Smearing appears

on glassware and

cutlery, there is a

bluish sheen on

the surface of

glassware; film can

be wiped off.

The rinse aid dosage is set

too high.

Reduce the dosage. See

Before using for the first time

- Rinse aid.

Problem solving guide

Problem Possible cause Remedy

Dishes, cutlery

and glasses are

not dry or are

flecked.

The amount of rinse aid

may be insufficient, or the

rinse aid reservoir empty.

Replenish the reservoir,

increase the dosage or

change the brand of rinse aid.

See Before using for the first

time.

Crockery was taken out of

the cabinet too soon.

Leave it in for longer. See

Operation.

Combi tabs have been

used which have impaired

drying performance.

Set the Combi tab function to

Normal, and fill the rinse aid

reservoir with rinse aid. See

Additional functions.

The Combi tab function has

been selected, but the

wrong type of detergent

was used.

Set the Combi tab function to

the detergent product being

used (see Additional

functions).

White residue is

visible on cutlery

and crockery,

clouding occurs

on glassware; film

can be wiped off.

Not enough rinse aid was

used.

Increase the dosage. See

Before using for the first time -

Rinse aid.

There is no salt in the salt

reservoir.

Fill the salt reservoir. See

Before using for the first time -

Filling the salt reservoir.

An unsuitable combination

detergent has been used.

Change your detergent. Use a

standard liquid, tablet or

powder detergent.

The water softener is

programmed to a setting

which is too low.

Select a higher water softener

setting. See "Before using for

the first time".

Problem solving guide

Problem Possible cause Remedy

Glassware has a

brown or blue tinge,

and film cannot be

wiped off.

This may be caused by the

detergent.

Change your detergent.

Glassware is dull and

discoloured; film

cannot be wiped off.

The glassware is not

dishwasher-proof. The

surfaces are affected.

There is no remedy.

Purchase glassware which

is dishwasher-proof.

Tea or lipstick stains

have not been

completely removed.

The wash temperature of

the selected programme

was too low.

Select a programme with a

higher wash temperature.

The bleaching effect of the

detergent used is too low.

Change your detergent.

Plastic items are

discoloured.

Natural dyes e.g. from

carrots, tomatoes or

ketchup may be the cause.

The amount of detergent

used or its bleaching effect

was not sufficient to deal

with natural dyes.

Use more detergent. See

Operation.

Discolouration is

irreversible.

There are rust stains

on cutlery.

The affected items are not

corrosion resistant.

There is no remedy.

Purchase cutlery which is

dishwasher-proof.

A programme was not run

after dishwasher salt was

added. Traces of salt have

got into the wash cycle.

Always run the "Quick

wash" programme, without

any crockery in the

dishwasher and without

selecting the "Turbo"

function, after adding

dishwasher salt.

Problem solving guide

Cleaning the water inlet filter

A filter is incorporated in the screw

connection of the valve on the water

inlet hose. The filter must be cleaned

when dirty, otherwise insufficient water

flows into the wash cabinet.

The plastic housing of the water

connection contains an electrical

component. It must not be dipped in

water.

Recommendation

If the mains water contains a large

amount of insoluble substances, we

recommend fitting a large-area filter in

the connection between the stopcock

and the water inlet hose threaded

union. This filter is available from the

Miele Spares Parts dept.

Cleaning the filter:

^ Disconnect the dishwasher from the

mains supply. Switch off at the mains

socket and withdraw the plug.

Close the stopcock.

Unscrew the inlet hose.

Carefully remove the seal.

^ Withdraw the filter using pointed

pliers and rinse clean under running

water.

^ Replace the filter and seal, making

sure they are sitting correctly.

^ Reconnect the inlet hose to the

stopcock, making sure it goes on

correctly and is not cross-threaded.

Turn on the stopcock gradually to

test for leaks. If there is a leak, the

inlet hose might not be on securely,

or it may have been screwed on at an

angle. Unscrew and reconnect the

water inlet valve correctly.

Maintenance

Cleaning the drain pump and

non-return valve

If the water has not been pumped away

at the end of a programme the drain

pump or the non-return valve might be

blocked. They are, however, easy to

clean.

Disconnect the dishwasher from the

mains supply. Switch off at the mains

socket and withdraw the plug.

Take the filter combination out of the

wash cabinet (see "Cleaning and

care - Cleaning the filters in the wash

cabinet").

^ Scoop the water out of the cabinet

using a suitable container or utensil.

Press the catch for the non-return

valve inwards a.

Lift out the non-return valve b, and

rinse well under running water.

Remove all foreign objects from the

non-return valve.

The drain pump is situated under the

non-return valve (see arrow).

^ Remove all foreign objects from the

drain pump (watch out for glass or

bone splinters which are particularly

difficult to detect and could cause

injury). Turn the drain pump impeller

by hand to check that there are no

more obstructions. You will feel a little

resistance when you turn the

impeller.

Carefully replace the non-return valve

and secure it with the catch.

Ensure that the catch engages

correctly.

Maintenance

Crockery Food deposits Action required

Mixed,

everyday crockery

All normal

food deposits

This needs an

adaptable programme...

Shorter duration...

Heat-sensitive glasses

and plastic

Fresh,

easily removed

food deposits

This needs a short

programme...

Mixed crockery

This needs a gentle

programme with

glass care...

Normal food deposits

which have begun to dry

This needs a standard

programme...

Shorter duration...

Pots, pans, everyday

porcelain and cutlery

To save water and

energy...

Burnt-on, stubborn,

dried-on food

deposits containing

starch or protein

This needs a powerful

programme...

Shorter duration...

All types

of crockery

Food deposits with a

strong smell

This needs rinsing before

running a programme...

Food such as potatoes, pasta, rice or casseroles can leave starchy deposits. Deposits containing

protein can be left by food such as fried meat, fish or eggs and bakes.

Programme chart

Programme Detergent

Compartment I

Compartment II

Sensor wash

–

25 ml

1 tab

+ Turbo option

Quick wash 40°C

–

25 ml

1 tab

Sensor wash gentle

–

25 ml

1 tab

Light soiling 50°C

–

25 ml

1 tab

+ Turbo option

Energy save

–

25 ml

1 tab

Pots & pans 75°C

10 ml

25 ml

1 tab

+ Turbo option

Quick wash 40°C

+ Turbo option

––

see "Detergent"

In some cases, tabs may not dissolve completely.

Programme chart

Programme Programme sequence

Pre-wash Main wash

°C

Interim rinse Final rinse

°C

Drying

Sensor wash Variable programme sequence,

sensor controlled adjustment according to the amount of crockery

and level of food deposits

If required 45-65 If required 60-70 X

Quick wash 40 °C 40 X 45 X

Sensor wash

gentle #

Variable programme sequence with glass care,

sensor controlled adjustment according to the amount of crockery

and level of food deposits

If required 40-48 If required 55 X

Light soiling 50 °C 50 X 65 X

Energy save 45 X 60 X

Pots & pans 75 °C X 75 X 65 X

Programme chart

Consumption

Duration

Energy Water

Cold

water

connection

(15 °C)

kWh

Hot

water

connection

(55 °C)

kWh

Litres Cold

water

connection

(15 °C)

h:min

Hot

water

connection

(55 °C)

h:min

0.95-1.35 0.70-1.00 8-17 1:36-2:38 1:23-2:21

0.55 0.20 10 0:38 0:27

0.70-0.95 0.40-0.50 10-17 1:26-2:02 1:17-1:43

1.05 0.75 10 1:36 1:23

1.05 0.70 10 2:49 2:40

1.50 1.10 13 2:38 2:27

1) Values quoted are in accordance with EN 50242. The durations given will vary depending on

individual conditions and the effect the sensors have on the load.

Selecting the "Turbo" function can reduce the programme duration by up to 50 minutes with an

increase in energy consumption of up to 0.2 kWh.

When the Combi tabs function is selected, energy consumption may increase by up to 0.2 kWh, and

the programme duration by up to 15 minutes.

On G 2XXX models (see data plate), the max. energy consumption is 0.1 kWh higher and the water

consumption is up to 1 litre higher than shown above.

Programme chart

Repairs

In the event of any faults that you

cannot remedy yourself, please

contact:

–

Your Miele dealer, or

–

the Miele Service Department (see

back cover for address).

Please note that telephone calls may

be monitored and recorded to

improve our service.

When contacting your Dealer or the

Service Department, please quote

the model type and number of your

appliance, both of which are shown

on the data plate on the right hand

side of the door.

N.B. A call-out charge will be

applied for service visits where the

problem could have been rectified

as described in these instructions.

Future updates

The programme update function is

designed to enable a service

technician to update your appliance's

electronics in keeping with advances in

technology.

Information regarding programme

updates will be made known by the

Miele Company as and when such

developments become available.

For testing institutes

All information required regarding

comparison testing and measuring

noise levels is given in the

"Comparison tests" leaflet.

The latest version of this leaflet can be

ordered on-line from:

– testinfo|miele.de

^ Please give your postal address, as

well as the model type and number of

your dishwasher (see data plate).

After sales service

To make the most of your dishwasher

Optional accessories for particular purposes are available from your Miele dealer,

the Spare Parts Department or online at www.miele-shop.com (some may be

supplied as standard, depending on model).

If you would like to … you will need to order …

… wash long-stemmed glassware … a glassware insert for the upper

basket

... wash bottles,

e. g. milk or baby bottles

… a bottle holder

… wash additional items of cutlery … a small cutlery basket for the lower

basket

... wash a lot of glasses … a glassware insert for the lower

basket

... wash large plates ... an insert for plates up to:

- 33 cm diameter

- 35 cm diameter

Optional accessories

Electrical connection U.K.

All electrical work must be

carried out by a suitably qualified

and competent person, in

accordance with current local and

national safety regulations (BS 7671

in the UK).

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

The appliance is supplied with a mains

cable with moulded plug ready for

connection to a 230-240V mains

supply. Please ensure the connection

data quoted on the data plate match

the household mains supply.

Connection should be made via a

suitable switched socket which is easily

accessible after installation.

For extra safety it is advisable to install

a suitable residual current device

(RCD). Contact a qualified electrician

for advice.

Do not connect via an extension lead.

Extension leads do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

embossed in words on the base of the

plug (as applicable to the design of

plug fitted).

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

WARNING: THIS APPLIANCE

MUST BE EARTHED

Electrical connection

The Miele waterproof anti-leak

system

Providing your dishwasher has been

installed correctly, the Miele waterproof

anti-leak system will protect you from

water damage throughout its lifetime.

Connection to the water

supply

Water in the dishwasher must

not be used as drinking water.

–

The dishwasher may be connected

to a cold or hot water supply, max.

60 °C. We would only recommend

connection to a hot water supply if it

is economical, e.g. a solar powered

supply. When connected to a hot

water supply all programme stages

which would otherwise be carried out

with cold water will be carried out

with hot water.

– The inlet hose is approx. 1.5 m long.

A 1.5 metre long flexible metal

extension hose, pressure tested to

14,000 kPa/ 140 bar, is available as

an optional accessory if required.

–

A stopcock with a

" male thread

must be provided on site.

–

This appliance is constructed to

comply with IEC/EN/DIN 61770 //

VDE 0700 Section 600, and may be

connected to a suitable supply

without an extra non-return valve if

national regulations permit.

–

The water pressure (flow pressure at

the take-off point) must be between

30 and 1000 kPa (0.3 and 10 bar).

If the water pressure is too high, a

pressure reducer valve must be

fitted.

To avoid any damage to the

appliance, the dishwasher must only

be connected to a fully vented

plumbing system.

! The inlet hose must not be

shortened or damaged in any way

as it contains electrical components

(see illustration).

Plumbing

Drainage

–

The appliance drainage system is

fitted with a non-return valve, which

prevents dirty water from flowing

back into the dishwasher via the

drain hose.

–

The dishwasher is supplied with

approx. 1.5 m of flexible drain hose

with an internal diameter of 22 mm.

–

The drain hose can be extended

using a connection piece to attach a

further length of hose.

The drainage length must not be

longer than 4 m, and the delivery

head must not exceed 1 m.

– If the hose is to be directly fitted to

the drainage outlet on site, use the

hose clip supplied (see installation

diagram).

– The hose can be directed to the left

or the right of the appliance.

– The on-site connector for the drain

hose can be adapted to different

widths of hose. If the connector

protrudes too far into the drain hose,

it will need to be shortened.

Otherwise the drain hose may

become blocked.

–

The drain hose must not be

shortened.

Make sure that there are no

kinks in the hose, and that it is not

squashed or stretched.

Venting the drainage system

If the on-site drain connection is

situated lower than the guide path for

the bottom basket rollers in the open

door, the drainage system must be

vented. Otherwise a siphoning effect

during a programme can cause the

appliance to empty itself of water.

To vent it:

Open the dishwasher door fully.

Pull the lower spray arm firmly

upwards to remove it.

Cut off the top of the vent valve in the

wash cabinet.

Plumbing

Dishwasher model G 1XXX G 2XXX

Height 80.5 cm

(adjustable + 6.5 cm)

84.5 cm

(adjustable + 6.5 cm)

Height of building-in

recess

Min. 80.5 cm (+ 6.5 cm) Min. 84.5 cm (+ 6.5 cm)

Width 59.8 cm 59.8 cm

Width of building-in

recess

60 cm 60 cm

Depth 57 cm 57 cm

Weight Max. 55 kg Max. 61 kg

Voltage 230 V 230 V

Connected load 2200 W 2200 W

Fuse rating 10 A 10 A

Test certificates awarded KEMA, VDE, radio and

television suppressed

KEMA, VDE, radio and

television suppressed

Water pressure (flow rate) 30 - 1000 kPa

(0.3 - 10 bar)

30 - 1000 kPa

(0.3 - 10 bar)

Hot water connection Up to max. 60 °C Up to max. 60 °C

Delivery head Max. 1 m Max. 1 m

Drainage length Max. 4 m Max. 4 m

Mains cable Approx. 1.7 m Approx. 1.7 m

Capacity 12/14 place settings* 12/14 place settings*

* depending on model

Technical data

Alteration rights reserved/

G1383/ G2383 / 0509

M.-Nr. 07 502 340 / 00

Storing f78
Hoe moet ik resetten?
Aliesoosterwijk1957@gmail.com Gesteld op 20-4-2021 om 20:44
Reageer op deze vraag Misbruik melden
Vaatwasser Miele G 2384 scvi geeft storing aan F78 Gesteld op 21-5-2015 om 09:46
Reageer op deze vraag Misbruik melden
- Ik heb deze fout ook. Geantwoord op 23-7-2016 om 08:45
  Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Miele G 2383 SCVi XXL bij:

nieuwe vragen en antwoorden
nieuwe handleidingen

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Miele G 2383 SCVi XXL in de taal/talen: Engels als bijlage per email.

De handleiding is 2,9 mb groot.

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Miele G 2383 SCVi XXL

Miele G 2383 SCVi XXL Gebruiksaanwijzing - Nederlands - 76 pagina's

Miele G 2383 SCVi XXL Gebruiksaanwijzing - Deutsch - 72 pagina's

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.

Miele G 2383 SCVi XXL Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Miele G 2383 SCVi XXL

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info

Miele G 2383 SCVi XXL Handleiding

Hulp nodig? Stel uw vraag in het forum

Forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Miele G 2383 SCVi XXL

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info