24
Basic operation instructions about photo/video/playback
Video mode and recording
1. When the camera is turned on, it automatically enters the video mode: there is a video camera icon
shown on the top left corner of the LCD;
2. Short press the OK button to start recording, the blue led starts flashing, indicating that the DVR
is recording.
3. Short press again the OK button to stop recording.
4. While recording:
5. Press the Menu button to lock the current file (it won’t be erased or overwritten)
6. Press < or > to Zoom IN/OUT
Photo mode
1. Keep pressed the Menu button to switch to photo mode : there is a photo camera icon shown on
the top left corner of the LCD;
2. Short press the OK button to take photo. The LCD will be flash once.
3. Press < or > to Zoom IN/OUT
Video/photo playback mode
1. In Photo mode, press Menu to switch to playback mode.
2. Select the desired file with < or >.
3. Press OK to playback a single file.
Menu settings
Video settings
• When the camera is turned on, it automatically enters the video mode: the video icon will be
shown on the top left corner of the LCD;
• Press shortly the Menu button once to switch to Video setting.
The following setting options are available on the display:
• Resolution
• Loop recording
• WDR
• G sensor sensitivity
• Exposure
• Motion Detection
• Record Audio
• Date Stamp
Press < or > to browse the setting options, press OK to enter the setting, change the feature by means
of the < or > controls and confirm your selection by pushing OK.
Attention: during the video recording it is not allowed to enter the Menu; first stop recording.