10.6 Display/keypad backlight
According to the environmental conditions you can adjust the display/keypad backlight.
•
Hold down MENU/SELECT until DSC CALL appears on the display
•
Scroll the list of functions with the UP/DOWN keys
•
Select SYSTEM and push MENU/SELECT as conrmation
•
Scroll again the list of functions with the UP/DOWN keys
•
Select BACK LIGHT and conrm by pushing MENU/SELECT.
•
Choose the desired backlight level (from 0 to 3).
To return to radio mode, push PTT, select EXIT in every menu or wait for 1 second and the radio
will automatically exit.
With long pressures of the MENU/SELECT button, you will exit menu by menu.
10.7 Band Edit
This function may be activated only with the optional programming kit PRG NEPTUNE 100.
It allows the selection of the following bands: USA-CANADA-INTERNATIONAL (default)
10.8 LCD contrast
The user can adjust the display contrast to optimise visibility according to ambient conditions.
To change this setting:
•
Hold down MENU/SELECT until DSC CALL appears on the display
•
Scroll the list of functions with the UP/DOWN keys
•
Select SYSTEM and conrm by pushing MENU/SELECT
•
Scroll again the list of functions with the UP/DOWN keys
•
Select LCD Adjust and push MENU/SELECT as conrmation
•
Choose the desired level, from 0 to 7.
To return to radio mode, push PTT, select EXIT in every menu or wait for 1 second and the radio
will automatically exit.
10.9 MMSI (Setting of personal MMSI code and MMSI group code)
This function allows the user to insert their personal MMSI identication code assigned by an
appropriate authority.
Be careful to insert the correct personal MMSI code. Once the code has been saved, it
cannotbemodied.
•
Hold down MENU/SELECT until DSC CALL appears on the display
•
Scroll the list of functions with the UP/DOWN keys
•
Select SET UP and conrm by pushing MENU/SELECT. MMSI will be displayed.
•
Scroll the alphanumerical list with the UP/DOWN keys and digit your own MMSI code.
•
If you errouneously edited a wrong code or you want to change a digit, push MEM.
Follow the same procedure to insert the MMSI group code but select GROUP MMSI instead of your
own MMSI code.
It is possible to change the MMSI group code whenever you want, while the personal MMSI code
can be inserted only one time; for this reason, we recommend to pay attention.
If you have accidentally inserted an incorrect code, you will have to return the device to your
approved vendor for a complete reset.
