8 | Midland G15 instruction guide
The Battery power saving feature enables a reduction in consumption of
up to 50%. If it has been set, it automatically activates when the transcei-
ver does not receive any signal for more than 5 seconds in order to save
the battery life. Power saving can be disabled only through Programming
software.
Roger Beep (End transmission tone)
When the PTT button is released, the radio will beep to confirm to other
users that you’ve finished your transmission and that they can start
talking.
The Roger Beep can be enabled through the programming software.
Keypad Beep
If this function is active, you will hear a beep tone everytime you press a
button (It can be disabled through the programming software).
Vox
The VOX feature enables hands free conversations without using PTT:
just speak in the direction of the microphone and the communication
will be automatically activated. The VOX sensitivity can be adjusted in 10
different levels (0,1,2,3…9) through the programming software:
0 means that the VOX is turned off, level 1 is set by default and has the
lowest VOX sensitivity, 9 is the highest one.
To activate the VOX feature, keep pressed for about 4 sec. the Function
key1.
With the programming software you can enable/disable the VOX feature
on the Function key and select the sensitivity levels.
Maintenance
Your G15 was designed to fulfill any warranty obligations and to enjoy
this product for many years.
As for all the electronically devices, we recommend you to follow this few
suggestions:
