2) Keep the button + pressed and turn your device back on. All
symbols on the display light up for about one second and you
hearabeepsoundofconrmation.
3) Whenthedisplaycomesbacktoitsnormalstatus,releasethe
+.
The roger beep will be disabled.
2 At point number 2, when roger beep is disabled it is given as a
two-tone signal, while its activation is signalled by a beep sound
followed by a two-tone signal.
6 Functions of the MENU button
With the MENU button you can set the basic functions of your
transceiveraccordingtoyourpreferences:selectionofchannel,VOX
mode,vibratingalert,scanningofchannels,etc.Inordertorecalland
settherequiredfunctiondoasfollows:
1) Press/scrollthe
MENUbuttontoselectthedesiredfunctiontoset,
(e.g..Po(transmissionpower),asithasalreadybeendescribed
inpar.5.9).
2) Pressthe
+ or – button to set the currently selected function.
According to the case you can scroll different values on the
display (e.g. for transmission power you can choose between the
valuesLoorHi),oryoucanselectOn(functionenabled)orOff
(functiondisabled).
3) Inordertomemorizethechosensettingpressthe
PTT button or
wait for a few seconds. The device will go back to standby mode
having memorized the chosen settings.
2 After you have carried out step number 1), it is necessary to carry
out each successive operation within few seconds, or the device
will go back to standby mode conrming current settings.
2 If, after you have carried out step 2) you wish to set another
function, go back to step 1 immediately.
The following table lists the functions which can be set according to
the number of times the
MENU button is pressed.
