18 | CT590S user’s manual
PTT-ID (PTT-ID) - MENU No.17
With this function you can decide when sending the ANI-ID code in tx mode.
You can choose amongst 4 possibilities.
OFF: No PTT ID sent
BOT: the code is sent when you press the PTT
EOT: the code is sent when the PTT is released
BOTH: the code is sent when you press and release the PTT
PTT ID delay (PTT-LT) - MENU No.18
In this MENU you can set the delay time (0-30ms) sending the PTT-ID.
Note: select ‘0’ in normal using.
Memory A Display Mode (MDF-A) - MENU No.19
This function is used to set the display mode of memory A.
Display modes:
FREQ.: Frequency + memory
CH: Channel number
NAME: Channel name
Note: Channel name mode can be set by the programming software.
Memory B Display Mode (MDF-B) - MENU No.20
This function is used to set the display mode of memory B.
Display modes:
FREQ.: Frequency + memory
CH: Channel number
NAME: Channel name
Note: Channel name mode can be set by the programming software.
Busy Channel Lock (BCL) - MENU No. 21
When this function is on, it will inhinibir the transmission when a signal is de-
tected. If the selected frequency is being used by other radios, when you press
key PTT, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.
Auto Keypad Lock (AUTOLK) - MENU No.22
When this feature is activated, the keypad will be automatically locked after
15s; this prevents accidental pressure of any keys .
