738488
11
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
UK
3
and press M1 for at least 3 sec to store the choosen channel in the M1
memory. Repeat these steps to memorise the other presets.
9. EMG button: Emergency channel. By pressing it, the unit will be
automatically positioned on CH 9 (emergency channel). The display will
show “EMG”. It will not be possibile to accidentally change the channel.
10/11. “Q. UP-Q. DOWN” buttons: To skip 10 channels up (Q. UP) or 10
channels down (Q. DOWN).
12. ’’CB/PA’’ Selector. In the “CB” position, the unit operates as a transceiver.
You can use the PA (public address) function only if you connect a speaker
to the PA jack. In this case the ‘’Volume’’ knob controls the amplification
level.
13. ‘’ANL/OFF’’ Selector. In the ‘’ANL’’ position it activates an automatic
noise limiter for the impulsive noises (caused by the engine of the car or
other sources).
14. “Local/DX” Selector ”Local” position: to receive strong signal only.”DX”
position: to receive weak signals.
15. “AM/FM”(LCR) button: To select AM or FM mode. If you push it along
with the “SCAN” button at the switching on of the radio, it selects the
operating band, which will be displayed. If you select a frequency band
operating in FM mode only, this button enables the LCR function (Last
Channel Recall).
16. “SCAN/NB” button: with this control, you can automatically seek for a
busy channel. Turn the Squelch clockwise until the background noise is
no longer heard.
Press the ‘’SCAN’’ button: the transceiver will scan automatically all the
channels until a carrier is being received. If you push it along with the “AM/
FM” button at the switching on of the radio, it selects the operating band,
which will be displayed. Keep pressed this button to activate the Noise
Blanker filter. To prevent interferences, this filter blocks the signal at every
pulse of high peak energy, such as the car ignition noise for example.
17. DW button: This feature allows you to scan 2 channels of your choice.
When a signal on the second channel is picked up, the conversation on
the first is automatically interrupted and the receiver switches on the
second channel. The monitoring starts again 4 seconds after the carrier
disappears.
To activate this function, operate as follows:
a. Select the desired channel through the channel selector.
b. Press the “DW” button (DW blinks on the display).
c. Select the second channel.
d. Push the “DW” button again: the reading DW will remain fixed.
e. To disable this function, press the “DW” control.
REAR PANEL
18. Antenna connector (SO239 connector type).
19. S. Meter jack: it allows an external “S. Meter” connection.
20. “PA” jack: by connecting with an external loudspeaker, you can use the
unit as an audio-amplifier.
21. ”EXT” jack: external loudspeaker jack (the internal loudspeaker is
excluded).
22. Power 12.6/24V: power supply cable.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Midland-Alan-48-Pro

Zoeken resetten

  • Ik wil de handleiding in het Nederlands, als die er niet is dan gaat dit product weer terug, dan ben ik er niet tevreden mee. Gesteld op 13-4-2022 om 16:33

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Midland Alan 48 Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Midland Alan 48 Pro in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info