12
English
5.10 Use of CALL button
The CALL button is used to make a call melody. Briefly press the
CALL button. The radio will go into transmission mode for approx.
two seconds, emitting a call. While this is happening, (transmission)
appear on the display, as well as the indicator, showing your
relative transmission power.
5.11 Clock mode
This mode allows the user to see the current time on the LCD display.
To activate this, briefly press the CLOCK button.
5.11.a Setting the time
1. In clock mode, briefly press the button. The hour will begin to
flash on the LCD display.
2. Press the or buttons to change the hour.
3. Briefly press the button again. The minutes will begin to flash
on the LCD display.
4. Press the or buttons to change the minutes.
5. Briefly press the button again to confirm the time.
6. To exit the clock mode, briefly press the CLOCK button.
When this mode is active, ALAN 445 SPORT will inform you
about a new incoming call, but the display will continue showing
the time. You can also transmit normally using the CALL or PTT
buttons. When this happens, the LCD display will automatically
switch to its regular operating screen, returning to clock mode as
soon as transmission is terminated.
5.12 Chronometer/Stopwatch mode
ALAN 445 SPORT is equipped with a built-in stopwatch.
To activate it:
1. Press the STW (Stop Watch) button (15): StopWatch and 00:
00:00
will appear on the display.
2. To activate the chronometer, press the button. At this point, you
can:
• View the elapsed time, by pressing the button. To exit the
elapsed time viewing, press the button again.
• Stop the chronometer by pressing the button. To reactivate
the chronometer from its stopping point, press the button
again. Or else press the button if you wish to restart the
chronometer at 00:
00:00
.
3. To exit the stopwatch function, press the STW button again.
When the stopwatch function is active, Alan 445 Sport is still
able to receive calls, but the display will continue showing the
chronometer’s progress.
When the stopwatch function is active, if you press the CALL or
PTT buttons, the radio will show the main screen during the call
but will continue to clock the chronometer’s progress, which will
appear on the display immediately afterwards.
