684490
9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
9
INSTRUCTION FOR USE OF CONTROL DEVICES
(Depending on model)
Using the programmer of cooking
Main functions (for some models)
Alarm Icon
Relay Operation Icon
Auto-programming
icon
Time-setting
Icon
Sec Icon
Number Display
on-off control
Power source
1 Time function, keep the time in 24 hours.
2 Make an reservation for the oven work time, and can set
anytime in 24 hours.
3 Set the oven work time, the longest maybe 10 hours.
Operation Panel and Instructions (for some models)
1 List of functions
Instructions from left to right: Key1, Key2, Key3.
Key1 Decrease Key
Key2 Mode Key
Key3 Increase Key
Note: Press Key 1 and Key 3 under the setting mode, which
nchanges the time by one minute either up or down. If keep
pressing them, the number will be up or down quickly.
2 Icon Instructions
“Auto-programming icon” : it will flash when setting automatic
program and the end of automatic program. If automatic
program has been set, after 5s, it will keep lighting up. At the
end of automatic program, the flash will be off when resetting
the clock or it will keep lighting up when resetting automatic
program after 5s.
“Time-setting Icon” will flash when setting Beijing time.
“Sec Icon” and “Alarm Icon” are flashing under the mode of
time setting and alarm setting, after 5s of setting, it will turn to
lighting up.
“Relay Operation Icon”b shows the working state of relays.
The icon will keep lighting up if contact are connected, and
will be off if contacts are disconnected. “Number Display” is
LED Nixie Tube.
As shown in the picture, on-off control is used to control
heating components of oven, the left is power source which
can be connected under the 220V.
1Time Adjustment after Starting up
When the power is on, it shows 12:00 and flashes. The relay
contact is disconnected, auto-programming icon keeps
lighting up, time setting icon flashes.
Press K1 or K3 to the time or press K2 to get into the present
working mode. The relay contact is connected.
Press K2 by 4 times to get into the present time-setting mode
under the common mode.
2Alarm and Buzz Function
Press K2 once under the common mode: "Alarm Icon"
flashes.”
Press K1 or K3 to adjust the present alarm clock.
5s after adjusting to the time you need, "Alarm Icon" keeps
flashing, and will work after setting up. In this case, pressing
K1 can know the alarming time( it will show seconds at one
ast minute).
When alarm counts down to zero, alarming program ends,
alarm icon flashes, and the buzzer os buzzing. Press any key
to stop the buzzing or it will turn off automatically after 2
minutes.
3 Auto-programming Setting and Instructions
Semiautomatic program mode
Use this setting for oven working time, automatic heating
switch-off at the end of setting time, buzzer will inform the
user.
Press K2 twice or three times to get into the auto-program-
ming time setting, “Auto-programming Icon” flashes. Press
K1 and K3 to aujust continuous time and end time.
5s after setting, it will work automatically, "Auto-program-
ming Icon" keeps lighting up. If continuous time is 0, turn
off the relay contact, and "Relay Operation Icon" is dark,
"Autoprogramming Icon" flashes, the buzzer is buzzing.
This mode’s range of continuous time and end time:
Adjustment range for continuous time: >0 but <10 hours
Adjustment range for end time: present time< end time < =
present time + 10 hours.
If meet this standard: end time = present time + continuous
time.
For example: the present time is 2: 00, then the max. end time
is adjusted to 12:00 (2: 0010001200). When the end time is
adjusted to 12:00, then the continuous time is 10:00.
5s after adjusted, automatic program is working.
After 10 hours, if continuous time is counting down to 0, turn
off the relay contact, and “Relay Operation Icon” is dark,
“Auto-programming Icon” flashes, the buzzer is buzzing.
Note:
1. only use this setting for either continuous time or end time.
For example: the present time is 2:00, and if let the oven
work for 3 hours, set the continuous time to 3:00, and the
end time will automatically change to 5:00 and vice versa.
2. If the continuous time is equal to 0 or the end time is equal
to the present time, it means that the automatic program is
over.
3. When the automatic program is over, the continuous time is
0 and the end time is equal to the present time.
Automatic Mode
Use this mode for setting oven’s starting time and end time,
which means make an appointment to boot. When the time is
Control Function and Intructions
1
2
over, it will automatically turn off the heating and the buzzer is
buzzing to inform the user.
Press twice to get into the continuous time setting mode
under the common mode, press three times to get into the
end time.
When the continuous time setting is ok or the end time setting
is ok, then press K2 to get into the other kind of automatic
program time setting, "Auto-programming Icon" flashes,
press K1 and K3 to ad just continuous time and end time
setting mode.
5s after automatic program setting, it will automatically work,
and "Auto-programming Icon" keeps lighting up. Turn off the
relay conntact, and the icon i s dark. When work until the
starting time, the relay contact is connected, the icon is light.
When the continuous time is counting down, if the continuous
time is 0,turn off the relay contact, "Relay Operation Icon" is
dark, "Auto-programming Icon" flashes, and the buzzer is
buzzing.
The continuous time and the end time under this model will be
set as follow: Starting time = end time - continuous time
For example, the present time is 2:00, set the continuous time
to 3:00, and the end time to 10:00, then the starting time is
7:00 (7:0010:003:00). The relay contact is connected and its
icon is light. After working for continuous 3 hours, the
continuous time is 0, turn off the relay contact, "Relay
Operation Icon" is dark, “Auto-programming Icon” flashes,
the buzzer is buzzing.
Note:
1 End time > present time + continuous time,
< but 23 hours and 59 minutes
For example: the present time is 2:00, continuous time is
0:01, then the range for end time is 2:02 (2:02 2:00+1).
2 Continuous time> 1 minute, continuous time and end time
both will be set.
3 If the continuous time is equ al to 0 or the end time is equal
to the present time it meas the automatic program is over.
4 When the automatic program is over, the continuous time is
0, and the end time is the same with the present time.
4Cancel Function
When semiautomatic or automatic function is starting, press
K1 and K3 at the same time which can cancel the automatic
mode. (to cancel continuous time and end time).
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Midea 36SME5GFQ00P48 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Midea 36SME5GFQ00P48 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info