c) When the measurement has been concluded, a long beep
tone sounds. The measured systolic and diastolic blood
pressure values as well as the pulse frequency are now
displayed.
Example (Fig.): Systole 118, Diastole 73, Pulse 75
The measurement results are displayed, until you switch the device off. If no button is pressed
for 5 minutes, the device switches automatically off, to save the batteries.
5.5. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for
any reason (e.g. the patient feels unwell), the 0/I button can be
pressed at any time. The device immediately lowers the cuff
pressure automatically.
5.6. Memory – recall of the measurements
The blood pressure monitor automatically stores each of the last
30 measurement values. By pressing the «M» button, the last
measurement (i.e. MR30) as well as the further last 29 measure-
ments (MR29, MR28, ..., MR1) can be displayed one after the other.
(MR30: Value of the last measurement) (MR29: Value of the measurement before MR 30)
6. Error messages/malfunctions
If an error occurs during a measurement, the measurement is
discontinued and a corresponding error code is displayed
(Example: Error No. 2).
11
O/I
