119
5 Information in Display
The cameras transmit the settings for ISO, lens focal
length (mm) and aperture to the flash unit.
It calculates the maximum flash range from the set-
tings and their guide number.
Flash mode, range and zoom position of the reflec-
tor are displayed in the display of the flash unit.
If the flash unit is operated without receiving data
from the camera, then the values set on the flash
unit will be shown.
5.1 Display of the flash mode
The current flash mode is shown in the display.
Depending on the type of camera, different displays
are available for the selected TTL flash mode (e.g.
) and the manual flash mode
(see 7.3).
5.2 Range display
When using cameras and a lens with CPU, the range
is indicated in the display.
For this a data exchange must have occurred bet-
ween the camera and flash unit, for example by tap-
ping the shutter release. The range can be display-
ed either in metres (m) or feet (ft) - see 14.2).
The flash range is not displayed when . . .
- when the reflector head is tilted out of its normal
position (upwards or sideways).
- if the flash unit is working in SERVO or AUTO
mode.
TTL M
5.2.1 Range display in TTL- flash modes
In the TTL flash modes ; see 7) the value
for the minimum and the maximum range of the
flash unit is displayed.
The value indicated relates to subjects with a reflec-
tion factor of 25%, which applies to most photogra-
phic situations.
Strong deviations from this reflection factor, as in
the case of highly reflective or poorly reflective sub-
jects, may affect the flash range of the flash unit.
The subject should be in the range of 40% to 70%
of the maximum range. This will give the electronics
sufficient scope for compensation.
To prevent overexposure, the minimum distance to
the subject shown in the display should not be
undershot.
Adjustment to the photographic situation at hand can
be achieved by, for example, changing the aperture of
the setting on the lens.
TTL
+
EV
7,9m
TTL
k
