517265
43
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
43
ķ
test flash, then the next lower f- number must be set to widen the
aperture, or the distance to the reflection surface or subject has to be
shortened. Thereafter repeat the test flash.
The f-stop established in this manner also has to be set on the
camera.
Direct the flash unit with its sensor for the test flash in the same man-
ner as for the subsequent flash shot.
An audible warning signal can be turned on with the switch ²
(fig. 5). When the shot has been correctly exposed there will be a
continuous audible buzzing signal for approx. 1 second.
2.6 Possible types of buzzer signals
A continuous audible sound is generated after a flash has been fired
and both the exposure o.k. indicator (fig. 3) and flash ready indi-
cator light up - correct exposure and flash readiness.
A continuous audible sound is generated after a flash has been fired
and only the exposure o.k. indicator (fig. 3) lights up - correct
exposure, but no flash readiness.
There is no audible sound after a flash has been fired, and the expo-
sure o.k. indicator (fig. 3) and flash ready indicator do not light
up - underexposure.
3. TTL Flash Mode
(only with SCA adapter)
Perfect flash exposures can be shot in a simple manner in TTL mode.
The exposure readings in TTL mode are made by the sensor built into the
camera (fig. 5). This sensor measures the light reaching the film through the
camera lens. As soon as the film has been exposed by the correct amount of
light, an electronic control circuit within the camera transmits a stop signal to
the adapter (optional accessory), and the flash is instantly cut out.
The advantage of this flash mode is that all factors influencing the exposure
of the film (filters, change of aperture and focal length with zoom lenses,
extensions for close-ups, etc.) are automatically taken into account.
The TTL flash mode is only possible with cameras that feature this func-
tion. The flashgun must be fitted with a corresponding SCA adapter for
this purpose. A film must be loaded in the camera to test the TTL func-
tions.
Exposure corrections may be necessary with pronounced differences in
contrast, for instance dark objects in snow (see Ch. 10.2).
Adjusting procedure for TTL flash mode:
• Set the camera as indicated in the camera’s operating instructions.
• Equip the flash unit with the appropriate SCA adapter and mount on the
camera.
• Turn on the flash unit with the main switch ¸ (fig 6).
• Push the locking key (fig. 3) downwards and unlock the setting centre.
• Turn the knurled knob (fig. 3) until "TTL" appears in the window (fig
3).
• Push the locking key upwards and lock the setting centre.
The maximum flash range for the given camera aperture can be read off the
setting dial on the reflector opposite the camera’s f-number.
Set the index mark · (fig. 4) in the "Man.:1" position. The minimum flash-
to-subject distance amounts to approx. 20% of the maximum flash range.
To check the range, the flash can only be fired by the camera and not
by way of the manual firing button on the flashgun (where possible
the camera should be adjustet to multiple exposure.
43

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Metz-MECABLITZ-60-CT-4

Zoeken resetten

  • De originele dryfit batterijen zijn niet meer te verkrijgen. Kan men deze vervangen door NaCa of Na Mh of li ion batterijen. En zo ja welk type en passen ze in het originele batterijhuis Gesteld op 3-5-2020 om 09:15

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metz MECABLITZ 60 CT-4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metz MECABLITZ 60 CT-4 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info