517338
100
Verklein
Vergroot
Pagina terug
1/174
Pagina verder
100
ķ
10.2 Bounce flash with a reflector card
The use of bounce flash with the integrated reflector card can bring out high-
lights in the eyes of human subjects:
• Tilt the reflector head upwards by 90°.
• Pull the reflector card together with the wide-
angle diffuser from above out of the reflector head
and forwards.
• Hold the reflector card and push the wide-angle
diffuser back into the reflector head.
10.3 Close-ups / macro shots
In close-ups and macro shots, parallax error between the flash unit and lens
may result in shadows on the lower edge of the image. To compensate for this,
the main reflector can be tilted downwards by an angle of -7°. To do this,
depress the reflector unlocking button and tilt the reflector downward.
Certain minimum lighting distances must be maintained for close-up shots to
avoid over-exposure.
The minimum lighting distance is approximately 10% of the maximum
flash range indicated in the display. When the reflector head is tilted
downwards, the maximum flash range flashes as an indication. For
close-up shots, make sure that the flash light is not shaded by the lens!
10.4 Flash exposure memory FE
Several cameras feature a flash exposure memory (FE; Flash-Exposure). The
flash unit supports this during E flash mode
It can be used to define and store the exposure level for the subsequent shot
before the shot is actually taken. This can be useful when, for example, the flash
exposure has to be adjusted to specific details that may not be necessarily be
identical with the main subject.
This function is activated on the camera. The subject details for the flash exposu-
re are measured and brought into focus by the cameraís AF sensor/metering
window. Pressing the cameraís FE button (the description varies from camera to
camera; see camera operating manual) causes the flash unit to fire an FE test
flash.
The stored metering value, for example „EL“, is then displayed in the camera
viewfinder. The camera uses the reflected light of the test flash to determine the
light output required for the subsequent exposure.
The actual main subject can then be brought into focus with the camera’s AF
sensor/metering window. When the shutter release is pressed, the picture will
be exposed with the previously defined light output of the flash unit!
The flash exposure memory FE is not supported during the green fully-
automatic programme, the Vari programme and the subject program-
mes! Further details regarding settings and handling can be found in the
camera operating manual!
TTL
709 47 0175.A2 50 AF-1 C 26.08.2010 15:53 Uhr Seite 100
100

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Metz-MECABLITZ-50-AF-1-digital-Canon

Zoeken resetten

  • Wie weet of ik de 50 AF-1 digital kan gebruiken op mijn canon 70D heb de flitser een paar jaar geleden gekocht bij mijn 400d en daar werkte hij goed .
    Nu flitst hij alleen, of te laat. Gesteld op 20-7-2017 om 14:20

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metz MECABLITZ 50 AF-1 digital Canon bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metz MECABLITZ 50 AF-1 digital Canon in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 4,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info