517338
86
Verklein
Vergroot
Pagina terug
1/174
Pagina verder
86
ķ
4 LED displays on the flash unit
4.1 Flash readiness indication
When the flash capacitor is charged, the flash readi-
ness symbol lights up on the flash unit, indica-
ting that the flash is ready to fire. This means that flash
light can be used for the next shot. Flash readiness is
also transmitted to the camera and indicated accor-
dingly in the camera’s viewfinder (see 6).
If a shot is taken before the flash readiness indicator appears in the camera’s
viewfinder, then the flash unit will not be triggered and, if the camera has alrea-
dy switched to flash sync speed (see 11.1), the shot may have the wrong expo-
sure.
4.2 Correct exposure indication
The correct exposure indication „OK“ only lights up
for about 5 seconds if the shot was correctly exposed
in TTL flash mode ( , E , E HSS; see 7)!
If no „OK“ exposure indication appears after the shot,
then the shot was underexposed. You will need to
repeat the shot with the next smaller f-number (for
example, f/8 instead of f/11) or the distance to the
subject or reflecting surface (for example, with bounce flash) will have to be
reduced. Note the maximum flash range indicated on the display of the flash
unit (see 5.2).
TTLTTLTTL
5 Information in Display
The Canon cameras transmit the settings for ISO, lens focal length (mm) and
aperture to the flash unit. It calculates the maximum flash range from the set-
tings and their guide number. Flash mode, range, aperture and zoom position
of the main reflector are displayed in the display of the flash unit.
If the flash unit is operated without having received data from the camera, only
the flash mode selected, the zoom position of the main reflector and „Zoom“ is
displayed. The displays for aperture and range only occur once the flash unit
has received the data required from the camera.
Zoom, aperture and flash range are only displayed on cameras where
the aperture and ISO values are transmitted to the flash unit!
Display illumination
Every time a button on the flash unit is pressed, the flash display illumination is
activated for 10 seconds. When a flash is fired via the camera or the hand
release on the flash unit, the display illumination is switched off.
5.1 Display of the flash mode
The current flash mode is shown in the
display. Depending on the type of camera,
different displays are available for the selected TTL
flash mode (e.g., , E , E HSS) and the
manual flash mode M (see 7).
5.2 Range display
The flash range is displayed when using cameras that transmit ISO, lens focal
length and aperture data. For this a data exchange must have occurred bet-
ween the camera and flash unit, for example by tapping the shutter release.
The range can be displayed either in metres (m) or feet (ft) - see 9.7.
The flash range is not displayed when no data is transmitted from the
camera.
TTLTTLTTL
F 5,6
7,5
m
Zoom
105
mm
TTLE
TTLE
709 47 0175.A2 50 AF-1 C 26.08.2010 15:52 Uhr Seite 86
86

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Metz-MECABLITZ-50-AF-1-digital-Canon

Zoeken resetten

  • Wie weet of ik de 50 AF-1 digital kan gebruiken op mijn canon 70D heb de flitser een paar jaar geleden gekocht bij mijn 400d en daar werkte hij goed .
    Nu flitst hij alleen, of te laat. Gesteld op 20-7-2017 om 14:20

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metz MECABLITZ 50 AF-1 digital Canon bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metz MECABLITZ 50 AF-1 digital Canon in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 4,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info