info@metronic.com.
18
11 - Using the receiver with a VCR
A - Programming
• Go to Menu / Timer Programming.
• The
Timer Programming
window lists the programs
to be recorded.
• To program a new recording,
press OK on an empty line.
• On
CN, select the channel you
wish to record using the keys
• On
Date, enter the date of the
program with the digital keys.
• On
Hour, enter the time at which
the program starts.
• On
Duration, enter the duration
time of the program.
• On
Repeat, select No if this is
a one off recording, Weekly if
you wish for the program to be
recorded the same day every
week, or Daily if you wish for this
program to be recorded every day
at the same time.
• On
Subtitles, select Yes or No
depending whether you wish to
record these as well.
You must then program your VCR
in the same way so that it starts
recording at the same time.
You should remember to record the
channel that corresponds to the scart
plug (AUX, EXT etc). Please refer
to our VCR manual if necessary.
If you switch on the receiver whilst a program is supposed
to be recorded, you will be requested to conrm any changes
by pressing EXIT.
34
