495007
3
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
FOREWORD
Thank you for choosing a universal METRONIC remote. We are condent you will be fully satised with this product. The
495398 model allows you to control up to 6 appliances: TV, Satellite receiver (SAT), DVD recorder (DVD) or HIFI system (AUX),
DVB-T set top box (TNT), ADSL box (BOX). After inserting the 1.5V AAA batteries (not included) in the remote, you can set
up the remote for each appliance that you wish to control. The universal METRONIC remote has been conceived to control
most products of each brand. This is why you have the choice between 3 types of set ups: by Brand code, automatic search
or through the learning function. In the set up details below, we use a TV as example. In order to set up the remote for your
Satellite receiver or DVB-T set top box, replace ‘TV with ‘SAT’ or ‘TNT. After you have set up the remote, simply press the TV,
SAT, TNT etc key to select the appliance you wish to control.
In case your equipment is not recognized by this model, you may teach him (LEARN) through the original remote.
A - Set up by brand code
1 - Switch on your TV.
2 - Look up in the following pages the codes that correspond to the brand of your TV (i.e. for AEG, you should try the code
0589, then 1423 if the rst code does not work, and nally 0043 if none of the two rst codes work).
3 - Press the PROG and TV keys together for a few seconds until the light switches on. If you wait too long before pressing
another key, the remote will go into standby and the light will switch o. You should then start at Step 3.
4 - Enter one of the 4-digit Brand codes. After each digit, the light will briey switch o. It will switch o for good after you
have entered the 4th digit. If the light blinks twice and then stays on, try the next code.
5 - Point the remote towards your TV and try using the main features (changing channels, adjusting sound…)
6 - If the remote does not control the TV properly, try the set up again (from 3) with the next Brand code. If the remote
controls the TV correctly, then the set up is over. If the remote does not work properly with any code, you should try an
automatic search.
B - Automatic Search
1 - Switch on your TV. The automatic search might take a little while (up to 15 minutes).
2 - Press the
PROG
and TV keys together for a few seconds until the light switches on. When you release the keys the light
should stay on.
3 - Press the
PROG
key. The light should start blinking. Press the key until the light switches o and slowly starts blinking
again. This means the automatic search has started. The light should stay on and blink every time a new code is entered.
You should be ready to press the 0 key.
4 - As soon as the TV switches o, press the 0 key. The light should start blinking. Press the TV key. The light should switch
o. Note: You should be quick enough not to exceed 1 second before the next code from your remote control (a bit less
than 1 second between turning TV o and time to press key «0»).
5 - As your TV is now switched o, switch it on again using the original remote or with the front keys.
6 - Point the remote towards your TV and try using the main features (changing channels, adjusting sound…). If the remote
does not control the TV properly, try the automatic set up again (from 2). If the remote controls the TV correctly, then
the set up is over.
C - Learning function
If the rst two methods have failed, you can still set up the remote through the learning function. The method consists in co-
pying the keys from the original remote onto a key of your choosing on your new universal remote. The learning function can
also be used when Brand code set up and Automatic search only partly function (ineective special functions, for instance).
1 - Place both the original and the 495398 remotes up to a distance of three centimetres away, facing each other.
2 - Press the PROG key and push down. While keeping the PROG key pressed, press TV key, the warning light comes on.
Release both keys, and the light remains lit.
3 - Press the LEARN key, the warning light briey switches o, and comes on again.
4 - Press the key you want to program on your new universal remote 495398 (VOL+ for ex.), the light briey switches o,
and lights up again.
5 - Press the key to copy on the original remote (VOL+ in the ex.), the light blinks twice as soon as the key is recognized. If
the light does not blink, bring both remotes closer and press the key to copy again. If you take too much time to press
on the original key, the light will switch o, and you will have to start again from step 2.
6 - Start again from step 4 with the following keys (VOL -, POWER, 1,2,…).
7 - Once the last key has been recognized, press on LEARN, the light switches o showing that you have left the learning
function.
8 - Point the remote at your TV set and try to press the keys you have just programmed. If the TV set answers badly or does
not answer at all to some keys, start the learning function again for them from step 2. If the remote controls the TV set
correctly, then the set up is over.
Changing batteries
When the remote starts struggling to control the appliances or if it does not work properly, you should try changing
batteries. Thanks to its memory function, you can change batteries withouht losing your settings on the remote.
GB
|
6 in 1 UNIVERSAL REMOTE CONTROL
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metronic ZAP 6 - 495398 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metronic ZAP 6 - 495398 in de taal/talen: Nederlands, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info