776307
15
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
MD 9040 & MD 9050 Digital multimeter Operation
15
PC computer interface capabilities
The instrument equips with an optical isolated interface port at the meter back for data
communication. Optional purchase PC USB interface kit AMD9050 is required to
connect the meter to the PC computer.
MAX/MIN/AVG* (REC) at fast 20/s measurement mode
Press REC button momentarily to activate MAX/MIN/AVG* recording mode. The LCD
“R” & “MAX MIN AVG*” turn on, and the reading update rate will be increased to
20/second. The meter beeps when new MAX (maximum) or MIN (minimum) reading is
updated. AVG* (Average) reading is calculated over time. Press the button momentarily
to read the MAX, MIN, MAX-MIN and AVG* readings in sequence. Press the button for
1 second or more to exit MAX/MIN/AVG* recording mode. Auto-ranging remains, and
Auto-Power-Off is disabled automatically in this mode.
1ms CREST capture mode (MD9050 only)
Press CREST button momentarily to activate CREST (Instantaneous Peak-Hold) mode
to capture voltage or current signal duration as short as 1ms. The LCD “C” & “MAX” turn
on. The meter beeps when new MAX (maximum) or MIN (minimum) reading is updated.
Press the button momentarily to read the MAX , MIN, and MAX-MIN (Vp-p) readings in
sequence. Press the button for 1 second or more to exit CREST mode. Auto-ranging
(up range) remains, and Auto-Power-Off is disabled automatically in this mode.
Backlighted display (MD9050 only)
Press the SELECT button for 1 second or more to toggle the LCD backlight. The
backlight will also be turned off automatically after 32 seconds to extend battery life.
Beep-Jack™ Input Warning
The meter beeps as well as displays “InEr” to warn the user against possible damage to
the meter due to improper connections to the μA, mA, or A input jacks when other
function (like voltage function) is selected.
Hold
The hold feature freezes the display for later view. Press the HOLD button momentarily
to toggle the hold feature.
Relative Zero mode
Relative zero allows the user to offset the meter consecutive measurements with the
displaying reading as the reference value. Practically all displaying readings can be set
as relative reference value including MAX/MIN/AVG* readings. Press the button
momentarily to toggle relative zero mode.
Manual or Auto-ranging
Press the RANGE button momentarily to select manual-ranging, and the meter will
remain in the range it was in, the LCD turns off. Press the button momentarily
again to step through the ranges. Press and hold the button for 1 second or more to
resume auto-ranging.
Note: Manual ranging feature is not available in Hz function.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metrel MD9040 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metrel MD9040 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 5.31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info