595069
14
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
ENGLISHen
14
prevent the battery pack from discharging totally
and avoid irreparable damage).
If one LED is flashing (26), the battery pack is almost
flat. If necessary, press the (27) button and check
the LEDs (26) to see the charge level. If the battery
pack is almost flat, it must be recharged.
2. Long continuous overloading of the machine will
activate the temperature cut-out.
Leave the machine or battery pack to cool.
Note:
If the battery pack feels very warm, the pack
will cool more quickly in your "AIR COOLED"
charger.
Note:
The machine will cool more quickly if you
operate it at idling speed.
3. If the current is too high (for example, if the
machine seizes continuously for long periods),
the machine switches off.
Switch off the machine at the trigger (5). Then
continue working as normal (in this case, read in
particular the safety instructions in Chapter
4...Kickback... in addition to all other safety
instructions). Try to prevent the machine from
seizing.
8.2 Switching on and off
Switching on: Press locking button (4) and hold in;
then actuate the trigger (5).
Switching off: Release the trigger (5).
8.3 Working instructions
Do not switch the machine on or off while the saw
blade is touching the workpiece.
Let the saw blade reach its full speed before
making a cut.
When the hand-held circular saw is added, the
movable guard is swung backwards by the
workpiece.
When sawing, never remove the machine from
the material with the saw blade turning. Allow the
saw blade to come to a standstill.
If the saw blade blocks, turn the machine off
immediately.
Sawing along a straight line: the cutting indicator
is used here (10). The left notch (marked 0°)
indicates the direction of the cut if the saw blade is
held vertically. The right notch (marked 45°)
indicates the direction of the cut if the saw blade is
held at 45°.
Sawing along a rail secured on the workpiece:
In order to achieve an exact cutting edge, you can
attach a rail to the workpiece and then guide the
hand-held circular saw by means of the guide plate
along this rail.
Sawing with parallel stop:
For cuts parallel to a straight edge. The parallel
guide (9) can be inserted from either side into the
support provided for it. Read the cut width from the
right or left of the cutting display (10). Tighten the
locking screw (11). It is best to calculate the exact
cut width by making a test cut.
Sawing with guide rail
6.31213
:
For straight, tear-free cut edges, precise to the millimetre.
The anti-slip coating keeps the surface safe and protects
the workpiece against scratches.
For guide rail 6.31213,
see
chapter on Accessories.
Battery pack heat generation:
Under extremely hard application conditions (e.g.
sawing thick wooden planks), the heavy load can
cause the battery pack to heat (> 60 °C). To
conserve the battery pack, allow it to cool down
before continuing work.
8.4 LED lights
The
powerful LED
(8)
illuminates the cutting line
when the machine is switched on.
Dust deposits must be regularly removed from the
machine. This includes cleaning the ventilation slits
on the motor with a vacuum cleaner.
Changing saw blades
Remove battery pack from machine.
Press in the spindle locking button (3) and hold in
place. Turn the saw spindle slowly with the spanner
in the saw blade fixing screw (20) (15)until the lock
catches.
Unscrew the saw blade fixing screw in a clockwise
direction and remove the outer saw blade flange
(21). Pull back the movable safety guard (23) and
remove the saw blade.
Ensure that the inner saw blade flange
(24)
is inserted
the correct way round (the collar faces the saw blade).
Insert a new saw blade, making sure the direction of
rotation is correct. The direction of rotation is
indicated by arrows on the saw blade and safety
guard. The contact areas between the inner saw
blade flange (24), the saw blade (22), the outer saw
blade flange (21) and the saw blade fixing screw
(20) must be clean.
Put on the outer saw blade flange (21). Ensure that the
outer saw blade flange
(21)
is inserted the correct way
round (inscription facing outwards).
Tighten the saw blade fixing screw
(20)
using the
hexagon wrench (15)
.
Use only sharp, undamaged saw blades. Do not
use any cracked saw blades or blades that have
changed their shape.
Do not use any saw blades made from high-
alloy high-speed steel (HSS).
Do not use any saw blades which do not
conform to the specified rating.
The saw blade must be suitable for the no-load
speed.
Use a saw blade that is suitable for the material
being sawn.
Always use saw blades that comply with standard
EN 847-1.
9. Maintenance
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KSA 18 LTX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KSA 18 LTX in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info