594929
12
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
12
ENGLISH
1. Declaration of Conformity..... 12
2. Components in the layout
diagram................................... 12
3. Please Read First!.................. 12
4. Safety ......................................12
5. Installation and Transport..... 14
6. Machine Details......................14
7. Initial Operation .....................14
8. Operation................................ 15
9. Care and Maintenance...........16
10. Tips and Tricks ...................... 17
11. Available Accessories........... 17
12. Repair...................................... 17
13. Disposal.................................. 17
14. Trouble Shooting ...................18
15. Technical Data ....................... 18
We declare in full responsibility that this
product conforms woth the standards
and directives referred to on page 3.
Figure see page 2.
Read instructions before use. Pay
special attention to the safety infor-
mation.
These instructions are intended for
persons with ba
sic technical knowl-
edge regarding the operation of a de-
vice like the one described herein. If
you
have no experience whatsoever,
you are strongly advised to seek com-
petent advise and guidance from an
e
xperienced person before operating
this machine.
Preserve all documents delivered to-
gether with this device. Retain proof
o
f purchase in case of warranty
claims. If you lend or sell this machine
be sure to have all machine docu-
ments supplied go with it.
The equipment manufacturer is not li-
able for any damage resulting from
neglect of these operating instruc-
tions.
Information in this manual is denoted
as follo
ws:
ADanger!
Risk of personal injury or
environmental
damage.
BRisk of electric shock!
Risk of personal injury by electric
shock
.
cDrawing-in/trapping hazard!
Risk of personal injury by body parts or
clo
thing being drawn into the rotating
saw blade.
A Caution!
Risk of material damage.
3 Note:
Additional information.
The numbers in the figures at the be-
ginning of these instructions
indicate component parts;
are consecutively numbered;
relate to the corresponding
number(s) in brackets (1), (2), (3)
... in the text.
Numbered steps must be carried out
i
n sequence.
Instructions which can be carried out
in any sequence are marked with a
bullet (•).
Listings are indicated by an En Dash (–).
4.1 Specified conditions of
use
The crosscut and mitre saw is suitable
for rip and cross cuts, bevel cuts, mitre
cuts and compound mitre cuts. It can
also be used for grooving.
Only materials for which the corre-
sponding saw blade is suitable may be
cut
(for allowable saw blades please
see chapter 'Available accessories'.
Allowable workpiece dimensions must
be
heeded (see chapter 'Technical
specifications'.
Stock having a round or irregular cross
section (such as fi
rewood) must not be
cut, as it cannot be securely held during
cutting. When sawing thin stock layed
on edge, a suitable auxiliary fence must
be used for firm support.
Any other use is not as specified. Un-
specified use, modifications to the ma-
chine, or use of parts not tested and
ap
proved by the manufacturer may
cause unforeseeable damage!
4.2 General Safety Instruc-
tions
When using this machine observe the
following safety instructions, to mini-
mize the risk of personal injury or ma-
terial damage.
Please also observe the special safe-
ty instructions in the respective
sec-
tions.
Where applicable, follow the legal di-
rectives or regulations for the preven-
tion of accidents pertaining to the use
of crosscut saws.
AGeneral hazards!
Keep your work area tidy – a messy
work area invites accidents. Halten
Sie den Fußboden frei von losen Par-
tikeln wie z. B. Spänen und Schnit-
tresten.
Be alert. Know what you are doing.
Set out to work with reason. Do not
operate tool while under the influence
of drugs, alcohol or medication.
Consider environmental conditions.
Keep work area well lit.
Prevent adverse body positions. En-
sure firm footing and keep your bal-
ance at all times.
Do not operate the machine near in-
flammable liquids or gases.
This tool may only be started and op-
erated by persons familiar with cross-
cut saws and who are aware of the
dangers associated with the operation
of such tools.
Persons under 18 years of age shall
use
this device only in the course of
their vocational training, under the su-
pervision of an instructor.
Do not allow other people, especially
children, to touch the electric tool or
the cord. Keep them away from the
work area.
Do not overload device – use it only
within the performance range it was
designed for (see “Technical Specifi-
cations”).
Use the correct electric tool. Do not
use inefficient machines for heavy du-
ties. Do not apply electric tools for
pu
rposes they are not intended for.
Do for instance not use a circular
Table of Contents
1. Declaration of Conformity
2. Components in the layout
diagram
1 Handle
2 Carrying handle
3 Carbon brushes
4 Motor
5 Chip bag
6 Dust extraction adapter
7 Transport locking pin
8 Cable hook
9 Holder for Allen key 6 mm
10 Track arm guide bars
11 Track arm lock screw
12 Cutting area illumination
13 Sawhead tilt lock lever
14 Fence
15 Table side extension
16 Stop lever for table extension
17 Lock screw for rotating table
18 Positive stop table lock lever
19 Table insert
20 Saw base (table)
21 Rotating table
22 Work clamp
23 Laser outlet
24 Retractable blade guard
25 Saw blade stop
26 Safety lock
27 Saw ON/OFF switch
3. Please Read First!
4. Safety
I_0011en6A.fm 9.5.11 Original operating instructions
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo KGS 216 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo KGS 216 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 18,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Metabo KGS 216

Metabo KGS 216 Gebruiksaanwijzing - Polski - 69 pagina's

Metabo KGS 216 Aanvulling / aanpassing - Dansk - 63 pagina's

Metabo KGS 216 Gebruiksaanwijzing - Dansk - 69 pagina's

Metabo KGS 216 Aanvulling / aanpassing - Svenska - 63 pagina's

Metabo KGS 216 Gebruiksaanwijzing - Svenska - 69 pagina's

Metabo KGS 216 Aanvulling / aanpassing - Norsk - 63 pagina's

Metabo KGS 216 Gebruiksaanwijzing - Norsk - 69 pagina's

Metabo KGS 216 Aanvulling / aanpassing - Suomi - 63 pagina's

Metabo KGS 216 Gebruiksaanwijzing - Suomi - 69 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info