451433
14
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
14
ENGLISH
led by means of the two operating
levers. There are three possible
actions:
Press both operating levers
downward – The work cycle
starts, and the splitting knife
moves downward to split the log.
Press only one operating lever
downward – The splitting knife
stops.
Release both operating levers –
The splitting knife moves back
upward to its start position.
The splitting knife stops automati-
cally in the upper or lower position
(end of travel).
5. When the log is split, release both
operating levers – The splitting knife
then returns to its start position.
6. Remove the split pieces of wood,
and place them off to the side and
out of the immediate work area –
Now you are ready to continue split-
ting.
7. If you do not intend to continue
working immediately, turn off the
splitter by pressing the RED
switch (16).
6.2 Changing the start posi-
tion of the splitting knife
In addition to the height options provided
by the three pivoting support tables, you
can also change the upper start position
of the splitting knife to even better
accommodate the length of the log to be
split. With the upper start position for the
splitting knife set lower, the knife
requires less time to approach the work.
The results in a shorter work cycle.
Lowering the upper start position
1. Turn on the splitter (press the
GREEN switch).
2. Press both operating levers down-
ward – As soon as the splitting knife
has reached the new desired height,
release the right lever.
3. Switch machine OFF
4. Loosen the wing nut (18) and pull
out the control rod (17) until it
reaches the stop. Retighten the
wing nut.
The upper start position is now set
as desired. Continue to operate the
splitter as previously described.
Resetting the splitting knife to its
upper start position
1. Switch machine OFF.
2. Loosen the wing nut (18) and push
in the control rod (17) until it reaches
the stop. Retighten the wing nut.
The upper start position is now reset
at the maximum height.
A
Danger!
Prior to all servicing:
Switch machine OFF.
Unplug power cable.
DANGER! Directly after stopping the
splitter, the hydraulic oil and hydrau-
lic system parts may be hot! Let the
splitter cool down before any servic-
ing.
Avoid direct skin contact with hydrau-
lic oil. Wear protective gloves.
Dispose of hydraulic oil in an environ-
mentally friendly manner at a proper
waste oil collection point.
When topping up or changing the
hydraulic oil, be sure to use only
approved types of oil (see "Technical
Specifications").
Replace damaged parts, especially
safety devices, only with genuine
replacement parts since parts not
tested and approved by the equip-
ment manufacturer can cause
unforeseeable damage.
Repair and maintenance work other
than described in this section should
only be carried out by qualified spe-
cialists.
Check that all safety devices are
operational again after each service.
7.1 Changing the hydraulics
fluid
1. Move the splitting knife all the way
down, and turn off the splitter.
2. Before starting, place a suitable col-
lecting vessel in position underneath
the draining bolt (19). This vessel
must have a capacity of at least 7 lit-
ers.
3. Undo and remove the draining bolt
(19) and allow the oil to drain com-
pletely.
4. Refit the draining bolt (19) ) together
with the seal and tighten.
5. Unscrew the dipstick (20) and fill the
reservoir with hydraulic oil.
6. Checking the oil level. With the split-
ter column retracted the oil level
must be between the upper and
lower marks.
7. Screw the dipstick back in and
tighten it.
7.2 Clean the oil filter.
1. Undo the hollow bolt (23) on the
pump case (21) and, taking care not
to lose the three ring-seals (24) with-
draw the bolt from the hose connec-
tor (22).
7. Care and maintenance
17
18
19
20
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo HS 6000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo HS 6000 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens als bijlage per email.

De handleiding is 4,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info