451417
15
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
15
ENGLISH
For special tasks the following accesso-
ries are available at your specialized
dealer – see back cover for illustrations:
A Saw blade SP 600 x 2.8 x 30 56
KV
Standard saw blade
B Saw blade CV 600 x 2.8 x 30
56 WZ
CV steel, for hardwoods and soft
wood.
C Saw blade HW 600 x 3.9/2.8 x 30
26 WZ
Tungsten carbide tipped, espe-
cially for hardwoods and an
extended edge life.
A
Danger!
Repairs to electric tools must
be carried out by qualified electri-
cians only!
Electric tools in need of repair can be
sent to the service centre of your coun-
try. Refer to the spare parts list for the
address.
Please attach a description of the fault to
the electric tool.
The machine's packing can be 100%
recycled.
Worn out electric tools and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
A
Danger!
Before carrying out any fault
service or maintenance work, always:
switch machine OFF;
unplug power cable;
wait for saw blade to come to
standstill.
Check that all safety devices are
operational again after each fault
service.
Motor does not run
No mains voltage:
check cables, plug, outlet and mains
fuse.
Mains voltage too low:
Use power cable of sufficient lead
cross section (see "Technical speci-
fications").
No-voltage release solenoid tripped by
temporary power failure:
switch on again.
Overload protection tripped:
let motor cool down for approx. 10 min-
utes, then start motor again.
Motor lo cked, e.g. by a blocked saw
blade:
Remove cause for blocking, let
motor cool down if necessary, then
start motor again.
Incorrect rotational direction of saw
blade
Phase sequence changed at the phase
changer:
Change direction of rotation (see
"Mains connection").
Poor cutting performance
Saw blade blunt (possibly tempering
marks on blade body):
Have saw blade resharpened or
replace it (see "Maintenance").
Set of teeth insufficient:
Have teeth set properly or replace
saw blade (see "Maintenance").
Saw blade soiled by resin:
Clean saw blade (see "Mainte-
nance").
Wood is too wet:
Let wood try before cutting.
8. Available accessories
9. Repairs
10. Environmetal protection
11. Trouble shooting
12. Technical specifications
Electrical data Voltage
Nominal current
Fuse protection min. (time-lag or K-type breaker)
Protection class
V
A
A
400 (3 50 Hz)
6.5
10
IP 54
Motor: Power input P1
Power output P2
Speed
kW
kW
min
-1
4.2 kW S6 40%
2.7 kW S6 40%
1250
Saw blade Maximum diameter (outer)
Arbor bore diameter (inner)
Thickness
Maximum cutting speed
mm
mm
mm
m/s
600
30
2.8
39
Maximum dimensions of logs to be cut
Maximum diameter (reversing cut)
Minimum diameter
Maximum length
Minimum length
mm
mm
mm
mm
210
25
1000
300
Machine dimensions
Length
Width
Height
mm
mm
mm
1225
795
1050
Machine weight kg 102
* The values stated here only indicate the loudness emitted by this machine. Whether the operator is required to wear hearing pro-
tection can not be determined here. This depends on how much noise reaches the ear of the operator. And this, among other
things, depends on the existing ambient conditions (such as other sources of noise near by). Even though it may not be explicitly
required, it is in your own interest to always wear hearing protection when operating this machine.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Metabo BW 600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Metabo BW 600 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens als bijlage per email.

De handleiding is 3,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info