494851
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
9
To connect a subwoofer in a Meridian
digital surround system
COMMS
OUTPUT INPUT
DIGITAL INPUT
2 1
DIGITAL
OUTPUT
COMMS
OUTPUT INPUT
DIGITAL INPUT
21
DIGITAL
OUTPUT
COMMS
OUTPUT INPUT
DIGITAL INPUT
21
DIGITAL
OUTPUT
DSP loudspeaker
Centre (master)
COMMS
S5 lead
M5 lead
SY lead S5 lead (digital unused)
Meridian Surround Processor
511 S-patch box
S5 lead
S5 lead
DSP loudspeaker – Main
C52 SUBWOOFER CONTROLLER
RDSP loudspeaker – Main L
COMMS
2
DIGITAL
INPUT
DIGITAL
OUTPUT
DIGITAL OUTPUTS
L/RC/S
If your system includes more than two
Meridian DSP loudspeakers you will need a
511slavepatchbox(availableseparately)to
link together the S5 leads from each speaker,
as shown above.
• Note:Thismaynotapplytothe861,whichmay
be ordered with a built-in patch box.
• UsethecommspartofanM5leadtoconnect
one of the COMMS sockets on the Meridian
Surround Processor to the DSP loudspeaker you
have chosen as the master (typically the centre
speaker).
• UsetheaudiopartoftheM5leadtoconnect
the DSP loudspeaker to the C/S digital output
on the Meridian Surround Processor.
• ConnectanSY-leadtotheCOMMSoutputfrom
the master DSP loudspeaker, then connect one
of the sockets on the SY lead to one socket on
the 511 using an S5 lead.
• LinkalltheotherDSPloudspeakerstogetherin
pairs using S5 leads, as shown in the illustration.
• ConnecteachpairofDSPloudspeakerstothe
appropriate digital output on the Meridian
Surround Processor, using an S5 lead. The
other part of the S5 lead is used to distribute
the COMMS from the 511 to each pair of DSP
loudspeakers.
• Setthedigitalchannelselectionswitchto
position 2 on the subwoofer.
To connect a subwoofer to a stereo
digital source, such as a Meridian CD
Player
COMMS
OUTPUT INPUT
DIGITAL INPUT
2 1
DIGITAL
OUTPUT
DIGITAL
OUTPUT
COMMS
DSP loudspeaker – Main R DSP loudspeaker – Main L
M5 lead
Meridian CD Player
COMMS
OUTPUT INPUT
DIGITAL INPUT
2 1
DIGITAL
OUTPUT
S5 lead
C52 SUBWOOFER CONTROLLER
COMMS
DIGITAL
INPUT
DIGITAL
OUTPUT
S5 lead
1+2
You can connect a pair of DSP loudspeakers
and a subwoofer directly to a digital source.
The DSP loudspeakers include volume,
balance, and tone controls allowing you to
control the system using the MSR+.
• ConnecttheDIGITALOUTPUTandaCOMMS
socket from the Meridian source or control unit
to DIGITAL INPUT 1 and the COMMS input on
the DSP loudspeaker chosen as the master,
using an M5 lead.
• ConnecttheDIGITALandCOMMSoutputsfrom
the master DSP loudspeaker to DIGITAL INPUT 1
and the COMMS input on the other (slave) DSP
loudspeaker, using an S5 lead.
• ConnecttheDIGITALandCOMMSoutputs
from the slave DSP loudspeaker to the DIGITAL
INPUT and COMMS on the subwoofer, using an
S5 lead.
• Setthedigitalchannelselectorswitchto
position1+2,tomixtheleftandrightchannels
to the subwoofer.
Analogue input connections
Connect the PHONO INPUT MONO to the
dedicated subwoofer output of a preamplifier
or surround controller, if it is the only
subwoofer in the system, or the left or right
output of a preamplifier or digital surround
processor, if the subwoofer is used as one of a
stereo pair.
PHONO INPUT LEFT/RIGHT should be
connected to the left and right outputs of a
preamplifier or surround processor, if it is the
only subwoofer.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meridian C52 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meridian C52 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info