494849
9
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
9
Note that when mains power is applied to the
unit it will initially enter ACTIVE mode.
When the C50 is in standby mode, power rails
are turned off for a significant saving in energy
usage and thus reduced carbon emissions. It
is neither required nor recommended to
leave the amplifiers in active mode when
not in use.
When the unit is brought into active mode,
a‘softstart’timingcircuitbringsthemain
toroidal power transformers online gently to
minimise current surges and unwanted startup
sounds.
Indicators
Ten blue LEDs on the front panel illuminate
when the unit is operating and confirm the
presence of power on all channels. All ten
LEDs should be illuminated during normal
operation: if a channel light is not illuminated,
a fault condition is indicated.
AfurtherblueLEDissituatednexttothe
Standby button and illuminates when the
unit is in standby, indicating that the unit is
powered. When this light is illuminated, the
channelindicatorsshouldbeextinguished.
A blue LED indicates when the unit has been
shut down as a result of overheating. In an
overtemperature situation the entire unit will
enter standby, irrespective of the status of
the trigger input and whether one or several
channels are the direct cause of overheating.
In this condition, normal operation will
continue as soon as the temperature returns
to safe levels, you are advised to be aware of
what may have caused the overheating issue.
TROUBLESHOOTING
Unit goes silent when played hard
The unit has a temperature sensing system
on board, which prevents overheating of the
electronics.
The sound will continue when the unit has
cooled. However, you are strongly advised
to be aware of what may have caused the
overheating issue before continuing. Is the
rack properly ventilated and cooled? Does
the associated fan come on when the unit
becomes hot (if using the fan output on the
unit)? Is sound coming out of all the speakers?
It is possible that the unit will shut down if
driven for abnormally long periods at unusually
high levels. If this is the case, simply wait
until the unit has cooled down and normal
operation will resume automatically.
There is radio interference
The unit has been designed to very high
standards of electromagnetic compatibility.
If this equipment does cause or suffer from
interference to/from radio or television
reception then the following measures should
be tried:
• Reorientthereceivingaerial(orantenna)or
route the antenna cable of the receiver as far as
possible from the unit and its cabling.
• Ensurethatthereceiveruseswell-screened
antenna cable.
• Relocatethereceiverwithrespecttotheunit.
• Connectthereceiverandthisproductto
different AC outlets.
• Iftheproblempersistscontactyourdealer.
Drive units move when the C50 is
switched on or off
This is normal as the amplifier electronics
settle.
Unit stays in standby
This generally indicates a problem with the
trigger connection and/or setup:
• Checkthetriggercablingandthatitiscorrectly
wired.
• Ensurethatthesourcedeviceprovidingthe
trigger is configured to provide a voltage in the
range 5–30v ac or dc when the unit is required
to come out of standby and for the trigger
voltage to be removed when the unit is to enter
standby.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meridian C50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meridian C50 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info