494842
4
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
808
808i
SIGNATURE
REFERENCE
CD PLAYER
USER GUIDE
i
Drive A
Repeat
Drive B
DVD
CD
Off
Signature Reference CD Player 808
Meridian 808/808i Signature Reference
CD Player User Guide
PREFACE
ii
Important safety instructions
Read the instructions.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near
water.
Clean only with a dry cloth.
Install only in accordance with
the manufacturer’s instructions.
Only use with a Meridian 808/808i
Signature Reference CD Player.
Refer all servicing to approved
service personnel.
Connection to the mains should
be carried out by a skilled and
suitable qualifi ed person.
Safety warnings
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE
Do not expose the unit to
dripping or splashing.
Do not place any object fi lled
with liquid, such as a vase, on the
unit.
Do not place naked fl ame
sources, such as lighted candles,
on the unit.
To avoid overheating
Leave at least 10cm around the
equipment to ensure suffi cient
ventilation.
Do not position the unit:
In direct sunlight.
Near heat sources, such as a
radiator.
Directly on top of heat producing
equipment, such as a power
amplifi er.
To avoid interference
Do not position the unit:
Near strong electrical or
magnetic radiation, such as near
a power amplifi er.
Radio interference
FCC Warning: This equipment
generates and can radiate radio
frequency energy and if not
installed and used correctly in
accordance with our instructions
may cause interference to radio
communications or radio and
television reception. It has been
type-tested and complies with the
limits set out in Subpart J, Part 15 of
FCC rules for a Class B computing
device. These limits are intended to
provide reasonable protection
against such interference in home
installations.
EEC: This product has been
designed and type-tested to comply
with the limits set out in EN55013
and EN55020.
iii
Contents
Introduction 1
The 808 Signature Reference CD Player 2
Specifi cation 4
Using the 808 Signature
Reference CD Player 5
Front panel keys 6
MSR+ keys 7
Switching on and off 8
Playing a disc 9
Stopping and pausing play 10
Repeat 11
Scanning a disc 12
Programming a selection 13
Changing the absolute phase 15
Changing the front-panel display 16
Using the CD player
preamplifier features 17
Selecting a source 18
Adjusting the system volume 19
Changing the balance 20
Installing the CD player 21
Unpacking 22
Applications 24
Configuring the CD player 29
Choosing a standard setting 30
Setting up sources 32
Glossary 35
Index 37
PREFACE
iv
Copyright and acknowledgements
Sales and service in the UK
Meridian Audio Ltd
Latham Road
Huntingdon
Cambridgeshire
PE29 6YE
England
Tel (01480) 445678
Fax (01480) 445686
Sales and service in the USA
Meridian America Inc
8055 Troon Circle
Suite C
Austell
GA30168-7849
USA
Tel (404) 344 7111
Fax (404) 346 7111
World Wide Web – http://www.meridian-audio.com
Designed and manufactured in the UK by
Meridian Audio Ltd
Latham Road
Huntingdon
Cambridgeshire
PE29 6YE
England
Copyright © 1999-2004 Meridian Audio Ltd.
Part no: 808U/1
MP3 is a registered trademark of
Thompson Multimedia.
Boothroyd|Stuart Meridian, and
Meridian are registered trademarks
of Meridian Audio Ltd.
This guide was produced by:
Human-Computer Interface Ltd,
http://www.interface.co.uk
1
Drive A
Repeat
Drive B
DVD
CD
Off
Signature Reference CD Player 808
Introduction
Welcome to the Meridian 808 Signature Reference CD Player!
This User Guide provides full information about using the CD player in
conjunction with your other equipment, to achieve the superb results
you can expect from it.
2
INTRODUCTION
The 808 Signature Reference
CD Player
The 808 Signature Reference CD Player takes Compact Disc playback to an
entirely new level, with a heritage that includes the multiple award
winning 508 and 800, and two dozen optical disc players from 1984 to the
present day. The 808 is specifi cally designed as a CD-optimised machine,
able to play virtually any CD, from conventional pressings to CD-R, CD-R/W,
and discs of MP3 fi les (64–256kbps). It also plays the CD layer of an SACD
disc.
At the heart of the 808 are fully-integrated electronics and a computer-
style CD/DVD-ROM drive. The drive normally operates at standard CD
speed, but is capable of much faster reading, using multiple high-speed
re-reads to ensure accurate recovery of data from even the most diffi cult
disc. This capability alone provides over ten times the error correction of a
conventional CD player.
Digital Signal Processing
Once the digital data stream has been recovered from the disc, powerful
on-board digital signal processing (DSP) with a capability of an impressive
150 MIPS (million instructions per second) up-samples the digital
information from the 16-bit, 44.1kHz signal of conventional CD to a 24-bit
signal with a sample rate of 176.4kHz. This signal is fed to the latest DVD-
Audio quality delta-sigma digital to analogue converters to drive the
analogue outputs, while a digital signal at an 88.2kHz sample rate is
supplied to the digital outputs. Upsampling in this way enables fi ltering to
take place far beyond the range of human hearing, as well as offering
other audible benefi ts, right across the audio band, for ultimate
transparency from a CD source.
The 808 employs a triple buffering system to minimise jitter, and therefore
maximise HF transparency and stereo image precision and stability. This,
and the digital electronics as a whole, are driven by a new design of high-
stability clocking system which further reduces jitter and ensures that the
highest level of detail is recovered from a disc. All digital data is accurately
re-clocked.
Multiple power supplies ensure that digital and analogue circuitry are kept
apart and can provide the required power when called upon to do so.
Integrated preamplifi er
The 808i version of the 808 Signature Reference CD Player includes a built-
in stereo preamplifi er with the ability to handle six stereo analogue inputs,
three digital coaxial S/PDIF inputs, and two Toslink optical digital inputs,
making it ideal as the heart of a superb stereo system.
3
INTRODUCTION
System integration
The 808 Signature Reference CD Player provides balanced and unbalanced
analogue outputs for connecting to an external power amplifi er or
preamplifi er. Alternatively, it provides coax digital outputs, allowing it to
drive Meridian DSP Loudspeakers directly. The digital outputs support MHR
(Meridian High Resolution) and operate at up to 2 x CD sample rate
(88.2kHz), 24-bit. An auxiliary digital output can be used to connect to a
surround decoder, or feed a second zone.
Meridian Comms sockets (2 x DIN) allow communication with other
Meridian components, while an RS232 interface provides full remote
control capability as well as the ability to confi gure the unit with Meridian’s
innovative Windows-based graphic confi guration application. Three
programmable trigger outputs are provided for direct control of external
devices, for example powering-up amplifi ers, etc.
The Meridian 808 Signature Reference CD Player is supplied with the MSR+
learning/programmable remote control, which not only operates all
Meridian products but also includes an extensive database of third-party
products and the capability to learn commands from existing remotes.
MP3 audio CDs
In addition to playing CD Audio (CD-DA), CD-R, CD-R/W, and DTS-CD format
discs, the 808 Signature Reference CD Player can play CD-ROMs containing
directories of MP3 audio fi les. This provides a convenient way of archiving
record collections to achieve up to 10 times the capacity of a conventional
CD where sound quality is not of primary importance.
MP3 discs can be created from a computer using appropriate MP3 encoding
software and a CD-ROM writer. Generate the MP3 fi les with a data rate of
at least 128Kbits per second. Group the tracks into folders to create
separate albums on the disc. Do not create folders within folders.
Tracks and albums are played in the order in which they are recorded onto
the CD-ROM. Usually this will be in alphabetical order of fi lename.
4
INTRODUCTION
Specification
Drive
Internal CD/DVD-ROM drive.
Audio in and out
The 808 is supplied as standard with:
2-channel balanced audio output.
2-channel unbalanced audio output.
2-channel digital coax output with optional MHR encryption at high
rate.
The 808i version also includes:
6 2-channel unbalanced analogue inputs. Adjustable sensitivity.
Renameable legends.
3 2-channel digital coax inputs. Renameable legends. 32 to 96kHz
sampling and up to 24-bit precision.
2 2-channel digital optical inputs. Renameable legends. 32 to 96kHz
sampling and up to 24-bit precision.
Signal processing
The 808 uses Meridian’s proprietary DSP software to provide the following
powerful features:
Upsampling.
FIFO and error correction.
Resolution enhancement.
Controls, etc.
Front-panel facia controls for:
Open/Close, Play, Stop, Pause, Previous, Next, and On/Off.
A hinged control panel provides additional controls for:
Repeat, Fast Forward/Reverse, Source, Store, Clear, Display, Mute, and
Volume +/-.
Display
20-character dot-matrix display with adjustable brightness and contrast.
Indicators for Emphasis, Repeat, and Phase.
5
Drive A
Repeat
Drive B
DVD
CD
Off
Signature Reference CD Player 808
Using the 808 Signature Reference
CD Player
This chapter provides a summary of the functions of the 808 Signature
Reference CD Player to identify the controls which you use to operate
the unit.
It also provides step-by-step instructions for operating the CD player,
using either the front panel or the MSR+.
PREFACE
6
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Front panel keys
6
OLUM
E
6
OLU
M
E
-U
T
E
3
TO
R
E
LEA
$I
SP
L
A
Y
2
E
P
EAT
3OURCE
#
LEA
R
#
LEARSATRACK
S
ELECTION
3
OURC
E
3ELECTSASOURC
E
$R
I
V
E
#
$
D
RIV
E
0LA
Y
0LA
Y
STHEDIS
C
3
TOP
3
TOPSTHEDIS
C
0
AUSE
0
AUSES
T
H
E
D
I
SC
.
EXT0REVIOUS
3ELECTSTHENEXT
O
RPREVIOUS
T
RAC
K
/FF
3
WI
TC
H
ES
TO
STANDB
Y
/PE
N
/
PENSC
L
OSES
TH
E
D
ISC
D
RAWER
$ISP
L
AY
#H
ANGEST
H
E
INF
O
RM
AT
I
ON
D
ISP
L
AYE
D
%Q
%
MPHASIS
INDICATOR
0H
ASEn
)N
D
I
CATES
INVERTED
P
HAS
E
3TO
R
E
3TO
R
ES
A
T
R
AC
K
SE
L
ECT
I
O
N
&
AST
&
O
RW
A
R
D
3CA
N
S
F
O
RW
A
R
DS
2
E
P
EA
T
2
E
P
EATSA
T
R
AC
K
D
I
SC
&
AST
2
EVERSE
3
CANS
B
ACKWARDS
6
O
L
UME
K
EYS
#
H
ANGET
HE
S
YSTEMVO
L
UM
E
P
EA
T
2
E
P
P
EAT2E
P
CATO
RIN
D
I
C
-UTE
-
UTESOR
RESTORESTHE
S
OUND
PREFACE
7
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
MSR+ keys
3!4#!",%#$
&UNCTION&UNCTION
2!$)/
$6$
!58 $)3#
2ECORD2ECORD
4!0%
%NTER
46
-ENU
3ETUP3ETUP
6#2 6#2 '!-%
"AND"AND !NGLE!NGLE
4OP-ENU
/PEN/PEN
!UDIO!UDIO
2ETURN
3TORE
3UBTITLE2EPEAT
$30
$ISPLAY
/3$/3$
0AGE0AGE
3LOW3LOW
0HASE0HASE
0AGE0AGE
!"!"
#LEAR -UTE
/&&
0OWER0OWER
0AUSE
0AUSES
THEDISC
3TORE
3TORESA
SELECTION
&UNCTION
3ELECTSASPECIAL
FUNCTION
2EPEAT
2EPEATSA
TRACKDISC
!"
2EPEATSA
SECTION
-ENUKEYS
3ELECTOR
CHANGETHE
BALANCEPHASE
CONTRASTOR
BRIGHTNESS
3OURCEKEYS
3ELECTASOURCE
#LEAR
#LEARSA
SELECTION
$ISPLAY
#HANGESTHE
FRONTPANEL
DISPLAY
&ASTREVERSE
3CANSBACKWARDS
0REVIOUS
3ELECTSTHE
PREVIOUSTRACK
3TOP
3TOPSTHEDISC
/PEN
/PENSTHEDISC
TRAY
&ASTFORWARD
3CANSFORWARDS
.EXT
3ELECTSTHENEXT
TRACK
0LAY
0LAYSTHEDISC
.UMBERKEYS
3ELECTATRACK
BYNUMBER
6OLUMEKEYS
#HANGETHE
VOLUME
-UTE
-UTESOR
RESTORESTHE
SOUND
/&&
3WITCHESTO
STANDBY
PREFACE
8
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Switching on and off
When not playing, the CD player should be left in the standby state. This
uses a minimal amount of electricity, but ensures that the components of
the CD player operate at maximum effi ciency from the moment you start.
If you are not going to use the CD player for several days you should switch
the unit off completely at the rear panel, and disconnect it from the AC
power supply.
To switch on from standby
• Press å, *, or > (front panel), or select a source on the remote.
If the CD player is part of a Meridian system it will automatically switch on
any other units in the system, such as the 861 Reference Digital Surround
Controller and Meridian DSP Loudspeakers.
To insert a disc
• Press å (front panel) or Open (remote) to open the tray.
Place your disc in the tray, label side up.
• Press
å (front panel), Open (remote), or > to close the tray.
To switch to standby
• Press Off.
If you have other Meridian equipment or Meridian DSP Loudspeakers
connected to the CD player these units will also switch to standby.
If a disc is currently playing, switching to standby will stop the disc, and the
disc can safely be left in the unit.
Always remove any disc before moving or shipping the 808.
PREFACE
9
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Playing a disc
The compact disc player allows you to play an entire disc, or start playing
from any track. While a disc is playing you can go back to the start of the
track or skip to the start of the next track.
If you have programmed a selection, these functions also work with the
selection of tracks you have programmed. For information about
programming see Programming a selection, page 13.
To play the disc
• Press > (front panel or remote).
The display will show your
selection:
Play l
The display will then show
the track number and elapsed time:
1 00:12
To restart the current track
• Press [ (front panel or remote).
To move to the next track
• Press > (front panel or remote).
To play starting from a particular track
• Press ] or [ (front panel or remote) to step through the track numbers
until the track you want to play is displayed, or type the number of the
track (remote only).
For example:
Track 4
After a short delay the track you have selected will start to play.
If you have other
Meridian sources you should ensure
that the 808 is the currently selected
source.
PREFACE
10
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Stopping and pausing play
You can pause a disc while keeping it spinning, so that you can resume play
instantly.
To stop playback
• Press *.
The display will show the total number of tracks on the disc and the total
time.
For example:
16 68:57
To pause playback
• Press =.
You can change tracks while the disc is paused using [ or
].
To continue after pausing
• Press = or >.
PREFACE
11
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Repeat
You can choose to play a track, disc, or selection repeatedly, so that when it
has played it will start again from the beginning; with MP3 discs you can
also repeat the current album.
To continuously repeat a disc
• Press Repeat (remote or under the front panel) to select between the
following options:
Display Description
Repeat track
Repeat current track.
Repeat disc
Repeat entire disc.
Repeat album
Repeat album (MP3 discs only).
To repeat between two positions
• Press A-B (Function Repeat on the remote) at the start of the section
you want to repeat.
The display shows:
Repeat A-
Move to the end of the section you want to repeat.
• Press A-B (Function Repeat on the remote) again.
The display shows:
Repeat A-B
The section you have specifi ed will be played repeatedly.
To cancel A-B repeat
• Press A-B.
To cancel the repeat function
• Press Repeat (remote or under the front panel) again.
PREFACE
12
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Scanning a disc
The scan controls allow you to move quickly to any position on the disc at
approximately 20 times normal speed.
During scanning you hear samples of the sound, and the display
automatically changes to show the elapsed time for the whole disc unless
you have already selected one of the other time displays.
This function is only available from the remote.
To scan through a disc
• Press ˘ or ¯.
The display will show you the
position on the disc; for example:
3 12:37
• Press > when you have reached the position you want to play.
PREFACE
13
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Programming a selection
You can programme a selection of tracks and then play only the tracks you
have programmed.
You can programme a selection either by storing the tracks you want to
play, or by clearing the tracks you do not want to play. If you programme a
selection by storing the tracks you want to hear, you can play the tracks in
any order and repeat tracks in the sequence.
You can programme a selection while the disc is playing, in which case the
selection will be played after the current track fi nishes.
To choose a track to programme
• Press [ or ] to step through the track numbers until the track you want
is displayed, or type the number of the track you want.
To make a selection by adding tracks
Choose the fi rst track you want to play, as described above.
The display will show the track
number; for example:
Track 14
• Press Store.
The track will change from Track to Store, and all the other tracks will be
marked Clear.
For example:
Store 14
You should store the fi rst track for a selection within two seconds, or it will
begin to play.
To make a selection by omitting tracks
Choose one of the tracks you do not want to play, as described above.
The display will show the
track number; for example:
Track 12
• Press Clear.
The track will change from Track to Clear, and all the other tracks will be
marked Store.
For example:
Clear 12
PREFACE
14
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
You should clear the fi rst track for a selection within two seconds, or it will
begin to play.
To add or remove a track from a selection
Select the track using [ or ].
Alternatively you can enter the track number using the remote.
• Press Store to add the track, or Clear to remove the track.
To clear a programme
• Press * twice.
The display will show:
Clear Program
A programme is automatically cleared if you open the disc drawer, or press
Off.
PREFACE
15
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Changing the absolute phase
You can use the remote to invert the absolute phase of the analogue
output signal, which in some circumstances can give a noticeable
improvement in realism.
To display the phase setting
• Press Phase (Function Pause on the remote).
The display will show:
CD + Phase
To change the phase setting
• Press Phase (Function Pause on the remote) again.
The display will show the new
phase setting; for example:
CD - Phase
PREFACE
16
USING THE 808
SIGNATURE REFERENCE
CD PLAYER
Changing the front-panel display
The 808 Signature Reference CD Player displays information about the
current disc and settings on the 20-character front-panel display.
You can adjust the contrast and brightness of the front-panel display for
optimum viewing, and choose what information is displayed.
To change the contrast or brightness
• Press > or < (remote), until the display shows the current contrast or
brightness.
For example:
CD Contrast 10
• Press A or V (remote), to change the selected setting.
You can change the contrast or brightness between 0 and 15.
To change the displayed information
• Press Display (remote or under the front panel).
Each time you press Display the display will step between the following
options:
Display option Example
Track and elapsed time
1 68:57
Sampling rate, precision, and audio
format
44k1 16Bit LPCM CD
Blank
If the Diagnostic displays option has been selected, additional diagnostic
displays are included; see the Meridian Confi guration Program Guide.
17
Drive A
Repeat
Drive B
DVD
CD
Off
Signature Reference CD Player 808
Using the CD player preamplifier features
The 808i version of the 808 Signature Reference CD Player includes a
preamplifi er, and can act as the controller for up to 11 other sources.
Both models feature an optional volume control for the
analogue inputs.
This chapter explains how to use these features from either the front
panel or the MSR+.
18
USING THE CD PLAYER
PREAMPLIFIER FEATURES
Selecting a source
If you are using the 808i Signature Reference CD Player as a controller you
can connect up to 11 other sources to it, and select them from the front
panel or remote.
The CD player provides the following 12 sources:
CD, Radio, DVD, Aux, Disc, Tape, TV, Cable, Sat, VCR1, VCR2, and
Game.
The CD source usually corresponds to the internal drive.
The input associated with each of the other sources depends
on how the CD player has been set up; for more information
refer to the Meridian Confi guration Program Guide.
To select a source
• Press Source (under the front panel) until the display shows the source
you want, or press the appropriate source key on the remote; eg CD.
The display shows the source and volume setting.
For example, if you select the Radio
source the display might show:
Radio 65
The 808 CD player
mutes the sound while you
change source.
Your
installer may have
customised the labels displayed
for each source to suit your
other equipment
19
USING THE CD PLAYER
PREAMPLIFIER FEATURES
Adjusting the system volume
The 808 Signature Reference CD Player provides an optional volume control
on the analogue outputs, enabling it to drive amplifi ers or active
loudspeakers directly, and you can adjust the volume using the front panel
or remote.
The volume changes in precise steps of 1dB, where 9dB is equivalent to
doubling the loudness. The current volume setting is displayed in dB on the
front-panel display, and can be varied in the range 1 to 99dB.
To change the volume
• Press Volume A or Volume V (under the front panel), or the red A or
V keys on the remote.
As you adjust the volume setting the display shows the current volume
level.
For example:
CD 65
To mute the sound
• Press Mute (under the front panel, or remote).
The display will show:
Mute
To restore the sound
• Press Mute again.
Alternatively, the sound will be restored if you adjust the volume.
20
USING THE CD PLAYER
PREAMPLIFIER FEATURES
Changing the balance
To change the balance
• Press < or > (remote or under the front panel) until the display shows
the current balance.
For example:
CD Balance <0>
• Press A or V (remote or under the front panel) to move the listening
position.
The display shows the direction and position of the listening position.
For example:
CD Balance <3
The arrow indicates the direction, and the number indicates the position
where 0 is central, 8 is in line with the corresponding main speaker, and 10
is fully to one side.
21
Drive A
Repeat
Drive B
DVD
CD
Off
Signature Reference CD Player 808
Installing the CD player
This chapter explains how to install the 808 or 808i CD player. It
describes what you should fi nd when you unpack the product, and
how you should connect it to the other equipment in the system.
You should not make any connections to the product or to any other
component in the system while the AC power supply is connected and
switched on.
25
INSTALLING THE
CD PLAYER
To connect to two-channel DSP loudspeakers
( Type 1 or 2)
-*xäääÊqÊ->Ûi -*xäääÊqÊ>ÃÌiÀ
/
"1/*1/
nänÉnän
"-
"-
 *1/ "1/*1/
/Ê *1/-
Ó£
xÊi>`
-xÊi>`
/
"1/*1/
"-
 *1/ "1/*1/
/Ê *1/-
Ó£
/
"1/*1/
The 808/808i can be connected directly to Meridian DSP loudspeakers to
create a complete compact stereo system, with volume and other
preamplifi er controls provided by the loudspeakers via the MSR+ or the
front panel. The 808i provides additional analogue and digital inputs
allowing you to use it to control the other sources in your system.
Connect the DIGITAL OUTPUT and a COMMS socket from the CD player
to DIGITAL INPUT 1 and the COMMS input on the DSP loudspeaker
chosen as the master, using an M5 lead.
Connect the DIGITAL and COMMS outputs from the master DSP
loudspeaker to DIGITAL INPUT 1 and the COMMS input on the other
(slave) DSP loudspeaker, using an S5 lead.
• Confi gure the loudspeakers as described in the Meridian DSP
Loudspeaker User Guide.
• Confi gure to Type 1 if using an 808 or 808i with no external inputs, or
Type 2 for an 808i with other inputs in use; see Choosing a standard
setting, page 30.
30
CONFIGURING THE
CD PLAYER
Choosing a standard setting
The CD player provides several sets of standard settings, called Types, which
confi gure all aspects of the 808 into one of a number of alternative
standard confi gurations.
Types 0 to 3 are factory settings, designed to cater for the most commonly
needed confi gurations of associated equipment.
These standard Types are shown in the following table:
Type Description
0 CD player, variable output, all sources internal.
1 CD Player, fi xed output, all sources internal.
2 Preamplifi er, fi xed output, CD internal, all other sources external (808i only).
3 Preamplifi er as above but variable output (808i only).
In addition, your installer may have provided one or more named User
Types, with settings appropriate to the confi guration of equipment when
your 808 was installed.
You can reset the confi guration of the CD player to any of these Types to
restore it to the state it was in when it was installed. Note: Selecting a Type
will clear any confi guration changes you have made.
To select a standard setting
Warning: this procedure will reset any confi guration changes you
have made.
Switch off any power amplifi ers that are connected to the 808 and put
any digital speakers into standby.
Put the CD player into standby by pressing Off (front panel or remote).
Press and hold down Volume
A (under the front panel).
The display shows:
Type in... 3
Keep holding down Volume A for a further three seconds.
The display shows:
Type- please wait
Then after a short delay the display shows the current Type.
For example:
Type 1
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meridian 808i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meridian 808i in de taal/talen: Engels als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info