657614
30
Verklein
Vergroot
Pagina terug
1/129
Pagina verder
30
a
Dismounting wheels
To dismount the wheel release the four bolts which en-
sure the fixing of the axle to the fork by two to three turns.
Do not unscrew the bolts completely. Subsequently, re-
lease the counterpart of the axle/bolt cap and remove
the axle completely from the hub.
i
More information are provided at
www.marzocchi.com
Marzocchi 15mm QR (e.g. Marzocchi 350CR)
Mounting wheels
If your bike is equipped with a Marzocchi 15mm QR sys-
tem
(a)
, put the front wheel into the fork and mount the
rotor in the brake caliper.
Bring the front wheel into the right position between the
drop-outs. Insert the thru axle with the E-Thru quick-re-
lease lever open from the right through the drop-out and
the hub.
As soon as the axle thread engages with the thread of
the left fork leg, close the axle by turning it clockwise.
In doing so, keep hold of the counter nut on the left fork
side. During the first rotations you should be able to ro-
tate the thru axle nearly without resistance. Tighten the
axle a little.
Close the Marzocchi quick-release lever like a usual
quick-release lever.
At the beginning you should feel virtually no resistance
and clamping effect. When the lever is at right angle the
resistance you feel should increase significantly and to-
wards the end you should need even more strength to
close the lever.
If you do not succeed in closing the lever completely,
open it again. Keep hold of the nut and turn the axle a
little counterclockwise. Try again to close the quick-re-
lease lever.
Use the palm of your hand to push it in all the way while
your fingers pull on the fork leg, but not on a spoke.
In its end position the quick-release lever should be
tight so that it can no longer be turned. Make sure the
quick-release lever does not stand out to the front or to
the side and does not touch the fork. The best closing
position is in nearly upright position in front of the lower
leg.
Dismounting wheels
If your bike is equipped with a Marzocchi 15mm QR sys-
tem, open the quick-release lever completely. Hold the
nut on the left side tight and turn the thru axle counter-
clockwise.
Once you have screwed out completely the thru-axle
thread from the thread of the lower leg, you can remove
the thru axle completely.
i
More information are provided at
www.marzocchi.com
30

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Merida-Pedelec

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Merida Pedelec bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Merida Pedelec in de taal/talen: Engels als bijlage per email.

De handleiding is 3,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info