Radio mode
21
Radio mode
Using the steering wheel buttons
+ You can switch between station selection
via memory presets and station selection
via frequency on the instrument cluster.
For information on how to do this, see the
vehicle Operator’s Manual.
E Set the desired waveband (e page 20).
E Switch the display to the Audio menu
(e page 17).
E Press the & button.
The station search starts in ascending or-
der.
or
E Press the * button.
The station search starts in descending
order.
Depending on the instrument cluster set-
ting, the station search stops at the next
station which can be received, either pre-
set in the memory or on the waveband.
Tuning in manually
+ This function is not available for Weather
Band (WB).
E Set the desired waveband (e page 20).
E Briefly press the n or ý button on
the radio.
The waveband is searched in the frequen-
cy steps stated above.
E Press and hold the n or ý button
on the radio.
The search does not stop at the frequen-
cy steps stated above.
Selecting using the station presets
You can store 5 stations in the AM waveband
and 5 stations in the Weather Band (WB).
For the FM wavebands, a total of 10 fixed sta-
tions and 5 Autostore memory presets can
be used.
Using Sound 5
E Set the desired waveband (e page 20).
E Press one of the buttons from 4 to
D.
The radio selects the stored station.
+ With the FM 6–10 range, memory presets
6–10 are also set using buttons 4 to
D. Memory preset location 10 appears
in the display as
FM0
.
Using the steering wheel buttons
E Set the desired waveband (e page 20).
E Switch the display to the Audio menu
(
e page 17).
E Press the & or * button.
The stored station is selected.
You can select presets 1–10 using the steer-
ing wheel buttons if:
O the Sound 5 radio is either in the FM 1–5
or FM 6–10 preset group and
O the display is set to "Select station from
memory" (
e page 17). Information on
how to set the display can be found in the
vehicle Operator’s Manual.
O Scan mode plays each station with ade-
quate reception for around 8 seconds.
O After it has run through the stations
twice, the scan stops automatically at the
station you were listening to before the
scan was started.
Starting scan mode
E Switch to the desired waveband
(
e page 20).
E Press the SC button.
The station search starts.
Scan mode
