799539
4
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
must wait for the pilot light to illuminate again, or you
will burn your clothes onto the iron. This will void the
warranty.
3.4. Dry ironing:
3.4.1. Make sure the temperature selection knob is at
the lowest level.
3.4.2. Set the iron on the support base on a steady,
firm surface.
3.4.3. Plug the appliance to the electrical power supply
and turn temperature selection knob to desired level,
the ready indicator light will turn on.
3.4.4. Once the light turns off, you may star to iron
over steady and firm surface.
3.4.5. When you have finished, turn the temperature
knob back to the lowest level, unplug from the electrical
power supply and wait until the appliance cools down
completely, before you proceed to store it.
IMPORTANT: If the iron contains water inside the tank
and you prefer dry ironing, move the steam control
lever to “0” position.
3.5. Steam ironing:
3.5.1. Make sure the appliance is unplugged from the
electric power supply, fill up the water tank. Make sure
not to overfill the tank.
3.5.2. Ensure the temperature selection knob is at the
lowest level, before plugging in the appliance.
3.5.3. Set the iron on its support base on a steady and
firm surface.
3.5.4. Plug in the iron and set the steam control lever
to the medium level.
3.5.5. Turn the temperature selection knob to the
desired level, suited for steam generation and the ready
indicator light should turn on.
3.5.6. Once the light turns off you may start ironing on
a steady and firm surface.
IMPORTANT: It is important to let the light to turn after
reaching the optimal temperature, otherwise the appli-
ance may experience leakage
3.5.7. Once you have finished its use, turn the tempera-
ture selection knob back to the lowest, unplug the appli-
ance from the electrical power supply and make sure to
wait until completely cools down before storing it.
IN ORDER TO STEAM IRON, HIGH TEMPERATURES
SHOULD BE SELECTED AT THE TEMPERATURE INDI-
CATOR KNOB.
3.6. Self-cleaning:
3.6.1. It is important to self-clean the appliance at least
once a month to remove calcium and any the built-up
minerals inside the iron.
3.6.2. Fill the water tank to its maximum level.
3.6.3. Place the iron in an upright position, plug into the
mains and select the maximum temperature.
3.6.4. Leave the appliance to heat up until the indicator
light turns off.
3.6.5. Unplug the appliance and place it in the sink.
3.6.6. Let the water flow out through the steam vents in
the base, while lightly shaking the appliance.
3.6.7. Release the button after a minute or when the
tank becomes empty.
3.6.8. Leave the iron in the upright position until it has
cooled.
3.7. How to deal with scale build up:
3.7.1. For the appliance to work correctly it should be
kept free of lime scale or magnesium incrustations
cause by the use of hard water.
3.7.2. To prevent this kind of problem, we recommend the
use of water with low lime or magnesium mineralization.
3.7.3. Homemade solutions are not recommended for
d.e-scaling this appliance, such as vinegar
4. Cleaning:
4.1. Disconnect the appliance from the mains power
supply and allow it to cool completely before undertak-
ing any cleaning task.
4.2. Clean the outer parts of the appliance with a damp
cloth with a few drops of washing-up liquid and then
dry. CAUTION! Do not immerse electrical parts of the
appliance in any liquid.
4.3. Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive products, for
cleaning the appliance.
4.4. Never submerge the appliance in water or any
other liquid or place it under running water.
5. Storage:
5.1. Make sure the to turn off the iron by the tempera-
ture selection knob to the lowest level.
5.2. Set the iron in a vertical position on top of its base
support and let is cool itself completely. Make sure to
empty the water tank.
5.3. Roll the power cord gently around its base support
and store the product on a dry and cool place, away
from direct sunlight.
6. nomalies and repair:
6.1. Take the appliance to an authorised support centre
if product is damaged or other problems arise.
6.2. If the connection to the mains has been damaged,
it must be replaced, and you should proceed as you
would in the case of damage.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mellerware GLIDE II - 23120A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mellerware GLIDE II - 23120A in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 0.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info