How to reassemble the appliance
• Placetherearpartonthescreen,sothatthescrew
holes along the side of the rear part align with the
holes on the screen. The two parts click together.
• Assemblethefrontbase(withtheon/offbutton)and
make sure the cords are not caught between the
parts.
• Attachtherearbaseandmakesurethestandis
correctly aligned with the screw holes at the back of
the appliance.
• Screwthetwopartsofthebasetogetherandfasten
the stand with the two screws at the top.
• Placetherestofthescrewsinthescrewholesalong
the side of the appliance and fasten them.
• Assemblethetopcover.
CLEANING
When cleaning the appliance, you should pay attention
tothefollowingpoints:
• Removeplugfromthemainssocket,andallowthe
appliance to cool down before cleaning it.
• Neversubmergetheapparatusinwater,andno
water must be allowed to get into it.
External cleaning
• Cleantheappliancebywipingitwithadampcloth.
A little detergent can be added if the appliance is
heavily soiled.
• Neveruseascouringpad,steelwooloranyformof
strong solvents or abrasive cleaning agents to clean
the appliance, as those may damage the outside
surfaces of the appliance.
• IMPORTANT!Allowtodryfullyaftercleaningbefore
using again. Do not use appliance if damp.
Internal cleaning
• Removethescreenasdescribedabove,wipeoff
reector,insideofscreenandtubeswithadry,soft
cloth. Do not use any kind of cleaning agents.
SPECIFICATIONS
Model WL1 WL3
Voltage 220~240 V 220~240 V
Wattage 180 VA 72 W
Hz 50 50
LUX 10,000 at 10 cm 10,000 at 10 cm
Lamp type FSL-YDW36-HRR Philips-PL-
L36W/865/4P
Fuse 250V;2AVDE 250V;2AVDE
Operating conditions:
Temperature:+5°Cto45°C
RelativeHumidity:30%to90%
Storage conditions:
Temperature:+5°Cto50°C
RelativeHumidity:30%to90%(nocondensation)
ClassIappliance;IP20
EXPLANATION OF SYMBOLS ON THE EQUIPMENT
Consultinstructionsforuse
Caution
IP20
Protected against solid foreign
objectsof12.5mmØand
greater, not protected against
of water
If you want to dispose this
product, do not mix with general
household waster. There is a
separate collection system for
used electronics products in
accordance with legislation
under WEEE Directive (Directive
2002/96/EC)andiseffective
only with in European Union.
Manufacturer
Date of manufacture
Serial number
ThisCEsymbolcertiesthat
the product complies with the
essentialrequirementsofthe
Medical Device Directive.
“ON”/“OFF”
EMCInformation-GuidanceandManufacture’s
Declaration
TechnicalDescriptionConcerningElectromagnetic
Emission