2. Installthelidandmotorunitonto
the appliance.
3. Connecttheappliance.
4. Selectthefeedtubethat
correspondstothesizeofthe
foodstobenelychopped.
5. Cutthevegetablesintosuitably
sizedpiecesandplacethepieces
in the feed tube.
6. Ensure that the tongue on the
lockingringtsdownintothe
recess around the activation pin.
7. Holdthepusherwithonehandand
slowly push it down into the feed
tube, whilst holding down the off
button on the locking ring with the
other hand.
8. Release the off button on the
locking ring to stop the appliance if
you wish to add more vegetables.
Turnthetongueonthelocking
ring away from the motor unit
whilstllingittoavoidaccidentally
starting the appliance.
9. Pull out the collection tray and
emptyoutthenelychopped
vegetableswhenyouhavenished
chopping.
Using the ice attachment
Theiceattachment(19)isintended
formakingcrushedice.Itmustnotbe
used for vegetables or other foods.
1. Installtheiceattachmentintothe
holder and install the holder onto
the appliance.
2. Installthelidandmotorunitonto
the appliance.
3. Connecttheappliance.
4. Fill the large feed tube with ice
cubes.Thetubemustnotbelled
tomorethan80%full.
5. Ensure that the tongue on the
lockingringtsdownintothe
recess around the activation pin.
6. Holdthepusherwithonehandand
slowly push it down into the feed
tube, whilst holding down the off
button on the locking ring with the
other hand.
7. Release the off button on the
locking ring to stop the appliance if
you wish to add more vegetables.
Turnthetongueonthelocking
ring away from the motor unit
whilstllingittoavoidaccidentally
starting the appliance.
8. Pull out the collection tray and
empty out the crushed ice when
nished.
After use
1. Remove the plug from the socket
and allow the appliance to cool
after use.
2. Dissembletheapplianceand
cleanallpartsbeforestoring.See
“Cleaning”.
STORAGE
• Ensurethattheapplianceisclean,
dry and completely cool before
storing it.
• Storetheapplianceinacleanand
dryplace,forinstanceinitsbox.
• Tostoretheappliancetakingup
the least room, place the grater
attachment in the holder and place
the holder in the collection tray.
Place all other attachments in the
bottomofthecollectiontray.Insert
the pushers inside one another and
place inside the large feed tube,
install the motor unit in its place.
• Donotplaceheavyobjectsontop
of the appliance.
• Thecordmustnotbetwistedor
wound around the appliance.
CLEANING
Whencleaningtheappliance,you
should pay attention to the following:
• Removetheplugfromthemains
socket, and allow the appliance
to cool down completely before
cleaning it.
• Donotimmersethemotorsection
of the appliance in water and make
sure no water enters the appliance.
• Cleanthemotorsectionbywiping
itwithadampcloth.Alittle
detergent can be added if the
appliance is heavily soiled.