Caution! If the appliance overheats, the overheat cut-out will •
automatically shut off power to the appliance. Switch off the
appliance and remove the plug from the wall socket. Wait for 10-15
minutes before using the appliance again.
Cord and plug
Keep the cord and appliance away from heat sources, hot objects •
and naked flames.
Check that it is not possible to pull or trip over the cord or any •
extension cord.
Switch off the appliance and remove the plug from the socket •
when cleaning, or when not in use. Avoid pulling the cord when
removing the plug from the socket. Instead, hold the plug.
Ensure that the cord is fully extended.•
The cord must not be twisted or wound around the appliance.•
Check frequently that the appliance, the cord and the plug are in •
perfect working order. If the appliance, cord or plug are damaged,
do not use the appliance. Do not use the appliance if it has been
dropped onto the floor or into water or damaged in any other way.
If the appliance, cord or plug have been damaged, have the •
appliance inspected and if necessary repaired by an authorised
repairer. Never try to repair the appliance yourself. Please contact
the store where you bought the appliance for repairs under the
guarantee. Unauthorised repairs or modifications to the appliance
will invalidate the guarantee.
KEY TO THE MAIN COMPONENTS OF THE APPLIANCE
Cylinder1.
Clip2.
Handle3.
Power indicator4.
ON/OFF button5.
Temperature indicators6.
Handle7.
USING THE APPLIANCE
Fully unroll the cord, plug in and switch the power on.1.
To switch on the appliance, press the ON/OFF button (5). The 2.
power indicator (4) lights up and remains lit as long as the
appliance remains switched on. The indicator (6) next to the lowest
temperature setting will also light up.
To set the required temperature, press the ON/OFF button 3.
repeatedly.
The appliance has four settings between 120 ºC and 180 ºC. o
The indicator for the selected temperature remains lit as long
as the appliance remains switched on.