30
UK
USING THE APPLIANCE
1. Fully unroll the cord and plug in the
appliance.
2. Switch on the appliance by pushing
the on/off button (4) to the “ON”
position (forward). The indicator light
(3) switches on and stays on while
the appliance is switched on.
3. Wait 2-3 minutes until the plates
(1) have reached the required
temperature, before using the
appliance.
4. Use the appliance to set your hair as
desired.
5. Turn off the appliance by pushing the
ON/OFF button to the “OFF” position
when you have finished using it.
6. Always remove plug from the mains
socket, and allow the appliance to
cool down before cleaning or storage.
Styling tips
Wash, comb and dry your hair until it is
only slightly damp. Divide your hair up
into small sections, and deal with them
separately piece by piece as described
below until the desired result is achieved.
• Start with a lock of hair about 5 cm
wide and close the hot plates
around the hair near the scalp.
Avoid touching the scalp with the hot
appliance.
• Slowly slide the appliance towards
the hair ends in a fluent movement.
Keep the hair tight to avoid kinks. For
more lift in the hair, smooth only the
outer part of the hair lock.
• You can finish by folding the locks
inward or outward, if you want the
ends to fold.
CLEANING
When cleaning the appliance, you should
pay attention to the following:
• Remove plug from the mains socket,
and allow the appliance to cool down
before cleaning it.
• Never submerge the appliance in
water and make sure no water enters
the appliance.
• Clean the appliance by wiping it with
a damp cloth. A little detergent can
be added if the appliance is heavily
soiled.
• Do not use scouring pads, steel wool
or any form of strong solvents or
abrasive cleaning agents to clean the
appliance, as they may damage the
external surfaces of the appliance.
• IMPORTANT! Allow to dry completely
after cleaning. Do not use the
appliance if it is damp.
