494810

Meliconi Gumbody Facile 1 Handleiding

1
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
6
Thank you for choosing a Meliconi remote control.
Keep this booklet for future reference.
The Facile 1 remote control is designed to control televisions. Thanks to its extensive database it can control
numerous TVs produced by a variety of brands on the market. It can also be connected to a PC using the
Meliconi audio cable (to be purchased separately), thereby allowing the user to download the most up-to-
date confi guration information. The remote control has a non-volatile memory, meaning that it does not lose its
settings even if there are no batteries in it. Its ergonomic shape and soft rubber body make it easy to grip and
protect the remote control if it is knocked or dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they exist on your device.
Volume control +/–
Numeric keypad
Confi rm selection
Fastext functions or for selecting sub-menus
using colours
Selects digital TV and radio
For selecting an external
input source
For selecting the next programme
P+ or the previous programme P–
MUTE turns sound OFF and ON
For moving around within the MENU
Selects
analogue/digital
Displays the list of programmes
ON / OFF switches the device OFF and
in some cases ON
Specifi c buttons for decoder
TELETEXT buttons
I
EN
7
Before using the remote control, insert the batteries and programme it.
The Facile 1 remote control is a universal remote with a memory containing data regarding numerous devices
produced by different brands on the market.
Each original device has a specifi c code which must be used to set up the remote control.
So to use the Facile 1 you must enter the specifi c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the specifi c code for the TV you wish to command. Then set the codes manually in your MELICONI
remote control as described in the ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light fl ashes, the batteries
inserted are not charged and are about to go fl at, therefore you must
substitute them.
Do not leave fl at batteries inserted,
as liquid may leak and damage the remote control
Today, Meliconi gives customers who don’t have internet the chance to receive the code for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 1A, TV, Brand, Model
- Brand, Model = to indicate the brand and the model of the device to be controlled.
Example: 1A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the fi rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button
on the remote.
If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.
SETTING CODES USING A CELL PHONE
(the service s fee and the only cost is that of sending the SMS,
which naturally depends on the rates of the service operator in question)
8
NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it
means the system has not been able to process the data you have sent. Do not try sending another
SMS use the MANUAL SEARCH instead.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use.
If they don’t, you are probably using an incorrect code destined for a very similar device; at this point
ignore the SMS list and consult the MANUAL CODE section to fi nd a more suitable code.
SETTING CODES USING A MANUAL SEARCH
(only to be performed if the specifi c code could not be found)
CHECK
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure
from point 2.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN
USE procedure and make a note of it inside the battery cover.
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode
in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. If this happens, go to the www.meliconi.com website
1. Switch on the TV and select a programme.
2. Press and hold down the ON / OFF and MUTE buttons
simultaneously for 6 seconds.
3. Release the buttons. The indicator light will fl ash. Point
the remote control at the device and press the ON/OFF
button. If the TV does NOT switch off, press the same
button again slowly (it may be necessary to press the
button several times).
4. When the TV responds correctly, press OK. Three long
fl ashes indicate that the operation has been carried out
correctly.
6 SEC.
and
9
INTERNET UPDATE
Today you can download from the internet directly to your remote control the codes of the latest devices or those
which will be brought out in future, codes which would not otherwise be available using traditional programming
methods. To do this you need to purchase the special MELICONI Audiocable, which allows you to download
the information you need onto any PC using an internet connection. Then go to the www.meliconi.com/guide
website and follow the on-screen instructions.
ENTERING THE CODE DIRECTLY
(only to be performed if you know the specifi c code to be set)
If they do not appear, repeat the procedure. If the result is still negative, it means the code indicated
is not included in the remote control. So you need to load it via INTERNET.
(see following section)
1. Press and hold down the ON / OFF and MUTE buttons
simultaneously for 6 seconds.
2. Release the buttons. The indicator light fl ashes.
Immediately enter the specifi c code found previously.
(e.g. 1306)
3. Three long fl ashes indicate a correct setting.
1
,
.
;
@
3
d
e
f
0
6
m
n
o
6 SEC.
and
DISPLAY CODE IN USE
If you set up the remote control using the MANUAL
SEARCH procedure, obtain and make a note of the code
in use as follows:
1. Press and hold down the ON / OFF and MUTE buttons
simultaneously for 6 seconds.
2. Release the button. The indicator light will fl ash. Press
the TV / RADIO button for an instant.
3. After a pause of several seconds, the indicator light
produces four sets of fl ashes, spaced out, corresponding
to the code to be obtained. Count the number of fl ashes.
Each set of fl ashes corresponds to one fi gure in the code.
Ten fl ashes correspond to the fi gure 0.
4. Make a note of the code obtained on the label on the
inside of the battery cover. You may need it in future.
Code obtained = 1306
6 SEC.
and
10
TROUBLESHOOTING
PROBLEM
The device does not respond and the indicator light
does not come on when a button is pressed.
The device does not respond but the indicator light
comes on.
When you press a button the indicator light fl ashes
and the device does not respond to commands.
The remote control does not execute all commands
correctly.
SOLUTION
Check that the batteries are charged and inserted
correctly and if necessary replace them with 2 new
1,5 V AAA/LR03 alkaline type batteries.
Make sure that the remote control is pointing at the
device and that there are no obstacles in the way.
If necessary, enter the remote control code again by
repeating the programming procedure.
Substitute the batteries, which are about to go fl at.
You may be using an incorrect code.
Enter the remote control settings again by repeating
the programming procedure.
INFO - LINE
•
read this Instructions Booklet carefully as it should allow you to solve most normal problems.
•
consult the www.meliconi.com website where you will fi nd all the answers you need quickly and easily.
2 year WARRANTY
The warranty is voided if the product is tampered
with or used improperly.
Remote control model: Facile 1
Purchase date
Retailer stamp
The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the
product must be collected separately from other waste. Therefore, at the end of the device’s life, you must take it to appropriate centres
for the differentiated collection of electrical and electronic waste, or return it to the retailer when purchasing a new device of equivalent
type, on a one-for-one basis. Suitable differentiated collection to allow subsequent recycling of the decommissioned device, with
environmentally-compatible treatment and disposal, help to prevent any negative effects on the environment and health and to promote
the recycling of the materials of which the device is made. Improper disposal of the product by the user will be subject to the sanctions
in Legislative Decree No. 22/1997 (article 50 and subsequent articles of Legislative Decree No. 22/1997).
If you have any questions about the new Facile 1 remote control:
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meliconi Gumbody Facile 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meliconi Gumbody Facile 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info