479172
7
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
Selecting the locationPreparing for the installation
Install Tools and Materials
1. Verication of the Vessel’s Power Supply.
2. Verication of the Satellite Receiver and IDU’s attachment and
the electricity supply
3. Procedure of the satellites attachment and installation.
Warnig!
The Seaman antenna system is designed for simple installation and setup. However,
the following list of equipment or items should be available during installation of the
Seaman antenna.
Determine the optimum mounting location for the antenna radome assembly. It
should be installed where:
Perform a through site inspection on the roof for the antenna to be mounted.
If these conditions cannot be entirely satised, the site selection will inevitably be a
“best compromise between the various considerations.
• Electric drill and drill bits
• Socket wrench
• Silicon sealant
• Fastener suitable for specic application
• Conrm that the vessel’s power supply is 12VDC~24VDC.
• Attach Satellite Receiver and IDU in the interior of the vessel or the trunk.
• Connect the power of Satellite Receiver and IDU.
• Once the power of Satellite Receiver and IDU is veried, it conrms that
both Satellite Receiver and IDU are working normally.
• Attach the satellite on the at surface area of the vessel’s roof.
• Connect each end of the Coaxial antenna cable to the satellites
terminal and the IDU.
• Connect the IDU and the Satellite Receiver box together through
the coaxial cable.
• Make sure that the satellite is working normally, once the power
is supplied.
• Turn o the power when attaching or detaching the antenna.
• Make sure that the attached satellite is xed on the at surface.
• When attaching, ensure that all the products are adhered properly.
• Ensure that all the cables are connected properly.
1. The antenna has a clear line-of-sight view to as much of the sky as is practical.
Choose a location where masts or other structures do not block the satellite
signal from the dish as the vessel turns.
2. The antenna is at least 5 feet away from other transmitting antennas (HF, VHF
and radar) that may generate signals that may interfere with the Seaman anten-
na. The further away the Seaman antenna is from these other antennas, the less
impact their operation will have on it.
3. Direct radiation into the antenna from vessels radar, especially high power
surveillance radar arrays, is minimized. The radome should be as far away from
the vessels Radar as possible and should NOT be mounted on the same plane
as the vessels Radar.
4. The antenna radome assembly should be rigidly mounted to the vessel. If
necessary, reinforce the mounting area to assure that it does not ex due to the
vessel motion or vibration.
1. The antenna must have a clear view of the sky and the horizon at all the direc-
tions to avoid blockage of the satellite signal.
2. The antenna should be on the top of the vessel.
Good
Location
Best
Location
Poor
Location
Figure 2-2 Selecting the location
ENGLISH ENGLISH
12
13
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Megasat Seaman 45 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Megasat Seaman 45 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Megasat Seaman 45

Megasat Seaman 45 Gebruiksaanwijzing - Deutsch - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info