551359
21
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
Deutsch
Brillantes FernsehenBrillantes Fernsehen
BENUTZERHANDBUCH
CTV 16 Plus
Inhalt Vorsicht
DEUTSCH DEUTSCH
02
03
Dieses Symbol warnt vor gefährlicher Spannung im Inneren des Ge-
häuses durch nicht isolierte Kabel. Ein Stromschlag kann so stark sein,
dass es sehr gefährlich für den Benutzer sein kann. Öffnen Sie niemals
das Gehäuse des Fernsehers.
Korrekte Entsorgung dieses Produktes
Dieses Symbol bedeutet, dass dieses Produkt oder die Batterie nicht im
Haushaltsmüll entsorgt werden darf. Um die ordnungsgemäße Abfallbe-
handlung des Produktes und der Batterie sicherzustellen, entsorgen Sie
diese bitte gemäß den örtlichen Gesetzen unter Voraussetzung für die
Entsorgung von Elektrogeräten und Batterien. Damit helfen Sie, die natür-
lichen Ressourcen zu schonen und die Standards des Umweltschutzes bei
der Behandlung und Entsorgung von Elektroschrott zu erfüllen.
Dieses Symbol bedeutet, dass elektronische Geräte am Ende ihrer Le-
bensdauer getrennt vom Hausmüll entsorgt werden müssen. Bitte ent-
sorgen Sie dieses Gerät bei Ihrem örtlichen Recycling-Zentrum.
Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv
Vorsicht ..........................................................................................................03
Sicherheitshinweis ..................................................................................04
Lieferumfang ..............................................................................................05
Technische Daten .................................................................................... 05
Produkteinführung
Vorderansicht .................................................................................... 06
Anschlüsse .......................................................................................... 07
Fernbedienung ................................................................................ 08
Erstinstallation ......................................................................................10
Grundfunktionen
Bild Menü ............................................................................................13
Ton Menü ............................................................................................14
Kanal Menü ........................................................................................15
Eigenschaften ................................................................................... 20
Einstellung Menü ...........................................................................22
Multimediabetrieb
Foto .........................................................................................................24
Musik ......................................................................................................24
Filme ....................................................................................................... 25
eBook .....................................................................................................25
DVD Betrieb
Grundeinstellungen......................................................................26
Audioeinstellung ............................................................................28
Dolby Digital ......................................................................................29
Weitere Einstellungen .................................................................29
Fehlerbehebung ..................................................................................32
Sicherheitshinweis Lieferumfang
Technische Daten
DEUTSCH DEUTSCH
04
05
1. CTV 16 Plus
2. Fernbedienung
3. 2x Batterien
4. AV Adapter
5. YUV Adapter
6. Netzteil
7. 12 V KFZ-Anschlusskabel
Um einen zuverlässigen und sicheren Betrieb dieses Gerätes zu gewährleisten, lesen Sie
bitte sorgfältig diese Bedienungsanleitung, insbesondere die Sicherheitshinweise unten.
Das Gerät kann nur mit der auf der Rückseite beschriebenen Spannung betrieben
werden. Sollten Sie die Spannung nicht kennen, fragen Sie bitte einen Elektriker.
Um eine Überlastung zu vermeiden, betreiben Sie nicht zu viele weitere Geräte an
der gleichen Steckdose.
Verlegen Sie Stromkabel unbedingt immer so, dass niemand darüber stolpern kann.
Das Kabel ist ummantelt und isoliert den Strom. Stellen Sie bitte keine Gegenstände
auf das Kabel, da dadurch die Schutzfunktion verloren gehen könnte. Vermeiden Sie
große Belastungen des Kabels, insbesondere an Buchsen und Steckern.
Wenn Sie den Stecker aus der Steckdose herausziehen wollen, ziehen Sie immer am
Stecker und nicht am Kabel. Das Kabel könnte ansonsten reißen.
Wenn Sie das Gerät für längere Zeit nicht mehr nutzen, ziehen Sie unbedingt das
Stromkabel ab.
Für den Schutz des Gerätes während eines Gewitters oder wenn es längere Zeit
unbeaufsichtigt ist, ziehen Sie bitte den Netzstecker aus der Steckdose und das
Antennenkabel aus der Antennedose. Dies verhindert Schäden aufgrund von Blitz-
schlägen.
Überlasten Sie keine Steckdosen, Verlängerungskabel oder sonstige Leitungen, da
dies zu Bränden oder elektrischen Schocks führen kann.
In die Öffnungen des Gerätes dürfen keine Gegenstände eingeführt werden, da an
einigen Stellen Strom fließt und der Kontakt Feuer oder einen Stromschlag hervor-
rufen kann.
Entfernen Sie nie die Abdeckung - es befinden sich keine Teile im Inneren, die vom
Benutzer selbst repariert werden können.
Betreiben Sie das Gerät nur mit dem mitgelieferten Netzteil.
Elektrische Sicherheit
Display LED Display (Pixelklasse 1)
Bildschirmgröße 15,6“ (39,6 cm)
Auflösung 1366 x 768
Kontrastverhältnis 800 : 1
Helligkeitswert 250 cd/m²
Betrachtungswinkel 170° H / 160° V
Empfangsarten DVB-S / DVB-S2 / DVB-T / DVB-C
Lautsprecher 2x 3 Watt (Stereo)
Anschlüsse RF Eingang (DVB-T & DVB-C)
ZF Eingang (DVB-S)
PC Eingang (D-Sub)
Audio Eingang koaxial (S/PDIF)
Audio Eingang 3,5 mm
Audio Ausgang 3,5 mm
HDMI Eingang
Video / Audio (L/R) (mit Adapter)
YUV (mit Adapter)
USB 2.0 (Mediaplayer / Softwareupgrade)
Scart
CI+ Schacht ja (HD+ ready)
DVD-Player (seitlich integriert) DVD-R/-RW/+R/+RW, VCD, CD, CD-R/-RW
Abspielformate Video/Foto/Audio MPEG 1-4, VOB, AVI, XVID / JPEG / MP3,
AC3, MP2, MPEG1, PCM, LPCM, OGG
Stromversorgung AC 100 V ~ 240 V, 50/60 Hz / DC 12 Volt
Stromverbrauch Betrieb / Standby max. 23 Watt / < 0,5 Watt
VESA Standard 100 x 100 mm
Produkteinführung Produkteinführung
DEUTSCH DEUTSCH
06
07
1. (IR) Infrarotempfänger: Empfänger für die Signale der Fernbedienung.
2. (EIN / AUS) LED Leuchte: Drücken Sie die Powertaste und den TV ein/aus zu schalten.
ROT: Bereitschaft (Standby)
GRÜN: Eingeschaltet
3. Die Funktionen der Tasten an der Gehäuseseite:
INPUT: Drücken Sie die Taste um das Menü anzuzeigen.
MENU: Drücken Sie die Taste um das Menü anzuzeigen.
CH +/-: Schaltet die Programme AUF/AB.
VOL +/-: Regelt die Lautstärke LAUT/LEISER.
PLAY: Abspielen/Pause im DVD Betrieb.
EJECT: DVD auswerfen/laden.
POWER: Schaltet den Fernseher EIN/AUS (Stand-by).
Hinweis:
Drücken Sie die Taste INPUT mehrfach, um die gewünschte Signalquelle auszuwählen.
Nach einer kurzen Wartezeit schaltet der Fernseher auf die gewünschte Signalquelle um.
Vorderansicht Seitenansicht Anschlüsse
POWER: Netzanschluß 12/230V Netzteil oder 12Volt Boardspannung.
HDMI: HDMI Eingang
VGA: Eingang für VGA Signale vom PC
PC Audio IN: Eingang für analogen Ton vom PC
SCART: SCART Anschluss
ANT IN1: Anschluss für DVB-T Antenne oder Kabelfernsehen
Digital Audio: Digitaler Audio-Ausgang (koaxial)
Mini AV: AV Eingang (FBAS/Audio Rechts/Links), über Adapterkabel
Mini YPbPr: Komponenteneingang (YPbPr), über Adapterkabel anschließen
USB: USB 2.0 Anschluss für Massenspeichergeräte
ANT IN2/DVB-S2: Eingang für Satellitenantenne (13/18V max. 500mA)
Common Interface: Steckplatz für CI/CI+ Slot
Kopfhöreranschluss: Ausgang für Kopfhörer mit 3,5mm Klinke
POWER
MINI
AV
MINI
YPbPr
USB DVB-S2 Common Interface CI+
Kopfhörer
HDMI VGA PC IN SCART ANT IN COAX
Produkteinführung Produkteinführung
DEUTSCH DEUTSCH
08
09
POWER : Fernseher ein-/ausschalten
(Bereitschaft/Stand By)
MUTE : Ton stummschalten
PICTURE: Zwischen Bildvoreinstellungen wechseln
ASPECT: Bildformat umschalten
SLEEP: Ausschalttimer stellen
SOUND: Zwischen Tonvoreinstellungen wechseln
FAV: Favoritenliste anzeigen
Zahlentasten: Eingabe von Programmnummern usw.
Zurück zum letzten Programmplatz
INFO: Informationen anzeigen
INPUT: Signalquelle, USB-Media Player, Digitales
oder analoges Fernsehen wählen
MENU: Öffnet das Einestellungsmenü
EXIT: Das jeweilige Menü verlassen
Navigations- Einstellungen in Bildschirm- und
tasten: DVD Menüs auswählen/ändern
Lautstärkeregelung/Programmwechsel
OK: Auswahl bestätigen/Programmliste
VOL +/-: Lautstärke erhöhen/verringern
CH +/-: Programme wechseln
EPG: Elektronischen Programmführer einblenden
TV/RADIO: Zwischen TV- und Radiosendern wechseln
EJECT: DVD auswerfen (nur im DVD-Modus)
REC: Keine Funtion
Abspielen/Pause
Nächstes Kapitel
Vorheriges Kapitel
Stopt das Program
Schneller Rücklauf
Schneller Vorlauf
SUBTITLE: Untertitel an/aus schalten
CH.LIST: Zeigt die Programmliste
REC.LIST: Keine Funtion
TV/TXT: Videotext aufrufen und beenden
CANCEL: Umschalten zwischen TV und Videotext
REVEAL: Zeigt versteckte Informationen im Videotext
NICAM/A2: TV Nicam/A2 wechseln.
INDEX: Index Seite aufrufen (Videotext)
HOLD: Unterseitenwechsel anhalten (Videotext)
SIZE: Obere Seite im Videotext vergrößern,
erneutes drücken um die untere zu
vergrößern und zurück zur Standardgröße
SUBPAGE: Unterseiten im Videotext aufrufen/beenden
D.PRO: Wiedergabeliste im DVD Modus bearbeiten
D.REP: Wiederholungsmodus im DVD Modus
einstellen
D.GOTO: Play your favorite title/chapter/track.
D.SLOW: Spielt DVDs in Zeitlupe ab
D.ZOOM: Bildausschnitt im DVD Modus auswählen.
D.TITLE: DVD Titel
D.SET: DVD System Einstellungen
D.MENU: DVD Menü aufrufen
D.SUB: DVD-Untertitel aufrufen
D.LAN: Sprachen/Tonspuren im DVD Modus wechseln
Fernbedinung
Erstinstallation Erstinstallation
DEUTSCH DEUTSCH
10
11
Bei der ersten Inbetriebnahme des Megasat CTV 16 Plus, erscheint die Autoinstallation
(Erstinstallation). Diese ist in 6 Schritte eingeteilt. Bitte wählen Sie Ihre persönlichen Ein-
stellungen.
Mit der grünen Taste gehen Sie zum nächsten Schritt, mit der roten Taste können Sie
einen Schritt zurück gehen.
Aufstellung 1
Home Mode:
Heimzustand
Dynamische Einstellung
Aufstellung 4
Automatische Abschaltung:
wählen Sie den gewünschte
Abschaltzeit
(Aus, 1 Std., 2 Std. oder 4 Std.)
Aufstellung 2
Land:
wählen Sie das gewünschte Land aus.
(Deutschland)
Aufstellung 5
Dienst:
wählen Sie den gewünschten Betriebs-
modus (DVB-T, Kabel, Satellit)
Aufstellung 3
Sprache:
wählen Sie die gewünschte Sprache
aus. (deutsch)
Aufstellung 6
Satelliten Setup:
wählen Sie die vorprogrammierte Liste,
oder Satelliten-System um eigene Ein-
stellungen vorzunehmen. Einzelheiten
zu den Einstellungen finden Sie unter
„Grundfunktionen“ ab Seite 17.
Grundfunktionen Grundfunktionen
DEUTSCH DEUTSCH
12
13
EIN/AUS
1. Verbinden Sie das Netzteil mit dem Fernseher und schalten Sie den
Netzschalter ein.
2. Schalten Sie den TV ein -> Drücken Sie die Power Taste an der
Fernbedienung.
1. Bild Menü
Hauptmenü Betrieb
Drücken Sie die MENÜ Taste um in das Hauptmenü zu gelangen:
Eingangsquelle wählen
Drücken Sie die INPUT Taste um die Eingangsquelle zu wählen. Nutzen
Sie die
p  / q Tasten der Fernbedienung oder direkt am TV um eine
Quelle zu wählen. Drücken Sie OK um zu bestätigen, oder warten Sie
einige Sekunden.
Hinweis: Bevor Sie die Quelle wählen, vergewissern Sie sich, dass die
Quelle betriebsberiet ist, da sonst kein Signal übertragen wird.
Bildmodus: Wählen Sie den geeigneten Bildmdus zwischen Dynamisch,
Standard, Mild und Benutzer.
Helligkeit: Regeln Sie die Helligkeit.
Kontrast: Regekn Sie den Kontrast.
Schärfe: Regeln Sie die Schärfe (grau hinterlegt im VGA/PC Betrieb).
Farbe: Regeln Sie die Farbe von farbig bis schwarz/weiß.
Farbton: Regeln Sie den Farbton (nur im NTSC Modus).
Farbtemp.: Wählen Sie zwischen verschiedenen Farmtemperaturen
(Warm, Kalt, Standard).
Seitenverhältnis: Wählen Sie das Seitenverhältnis des Bildschirms
(4:3,16:9, Zoom 1, Zoom 2 oder Panorama).
Rauschreduzierung: Wenn das empfangene Sendesignal schwach ist, können Sie die
Rauschreduzierung aktivieren. Wählen Sie hier zwischen
Aus, Niedrig, Mittel oder Hoch.
Drücken Sie
p  / q um im Menü zu navigieren, drücken Sie u / OK Taste um in ein Unter-
menü zu gelangen. Im Untermenü nutzen Sie p  / q um eine Funktion zu wählen. Drü-
cken Sie u / OK um in das Untermenü zu gelangen, nutzen Sies t  / u um die jeweilige
Einstellung zu ändern.
* Drücken Sie MENU / t um einen Schritt im Menü zurück zu gehen.
* Drücken Sie EXIT um das Menü komplett zu verlassen.
HINWEIS: Das Menü wird automatisch beendet, wenn keine Tasten betätigt werden.
Hauptmenü: Bild | Ton | Kanal | Eigenschaft | Einstellungen
Untermenü
(das Menübild
ist ein Beispiel)
Nutzen Sie das
Menü mit Hilfe
der angezeigten
Hinweisen.
Löschen:
Drücken Sie die ROTE Taste um ein Kanal
zu löschen. Sie werden erneut darauf
hingewiesen wenn Sie das Menü verlassen.
Sperren:
Sie müssen “Sperren“ aktivieren um diese
Funktion nutzen zu können. Drücken
Sie die GRÜNE Taste um einen Kanal
zu sperren. Vergeben Sie anschließend ein Passwort. Durch erneutes drücken wird
diese Funktion wieder deaktiviert.
Überspringen:
Drücken Sie die GELBE Taste um einen Kanal zu markieren, den Sie überspringen möch-
ten, wenn Sie auf der Fernbedienung die Kanaltasten hoch und runter drücken.
Verschieben:
Drücken Sie die BLAUE Taste um einen
Kanal zu markieren. Nutzen Sie p  / q
um ihn an eine beliebige Position zu
verschieben. Bestätigen Sie mit OK.
Lieblingsverwaltung (Favoriten):
Mit den Farbtasten können Favoriten
angelegt oder wieder entfernt werden.
Max. 4 Favoritenisten sind möglich. RED-Fav1, GREEN-Fav2, YELLOW-Fav3, BLUE-Fav4.
Grundfunktionen Grundfunktionen
DEUTSCH DEUTSCH
14
15
2. Audio Menü 3. Kanal Menü (ATV/DTV Modus)
Audio Modus: Wählen Sie Ihren gewünschten Klangmodus aus.
Standard, Film, Musik, Sprache oder Benutzer.
Bass: Regeln Sie die Stärke des Basses.
Höhen: Regeln Sie die Stärke der Höhen.
Balance: Regeln Sie die Balance zwischen dem linken und rechten
Lautsprecher.
Surround: Surround Funktion ein- oder ausschalten.
Auto Lautstärke (AVL): Regelt automatisch die gleichbleibente Lautstärke
aller angeschlossenen Quellen.
SPDIF: Wählen Sie den SPDIF Modus den Fernsehers
AUS, PCM oder Auto.
Kanal-Managment:
DEUTSCH DEUTSCH
16
17
Grundfunktionen Grundfunktionen
Land: Wählen Sie das Land
TV Anschluss: Wählen DTV type, Sie können wählen zwischen (DVB-T),
Kabel(DVB-C) und Satellit (DVB-S2).
DTV Manuelle Suche:
Drücken Sie
p  / q um zu dem “Kanal” Symbol zu gelangen, drücken Sie t  / u um in die
Einstellungen zu gelangen, anschließend gelangen Sie mit p  / q zum “Start Symbol.
Drücken Sie t  / u zur manuellen Suche.
Aktueller Kanal: Wählen Sie den aktuellen Kanal zur manuellen Suche.
Suche: Drücken Sie OK um in das Menü zu gelangen, suchen Sie manuell die Frequenz
mit den
t  / u Tasten.
Feinabstimmung: Drücken Sie OK um in die Feinabstimmung zu gelangen.
Wählen Sie Auto Suche wie folgt
Option Wert
Modus Standard-, Netzwerksuche, Komplette Suche
Satellit 65 Satelliten zur Suche (3 programmierbar)
Service Typ All Services, Free Service
Kanal Alle, nur TV
Hier werden die Vorgänge in der Satelliten Auto Suche gezeigt:
ATV Manuelle Suche:
Satelliten System
Drücken Sie
p  / q und wählen Sie TV Anschluss” , stellen Sie hier auf “Satellit”.
Autom. Suche: Drücken Sie Die OK Taste um in den Auto Suche Modus zu
wechseln, wählen Sie den Modus und drücken erneut OK.
Hinweis:
1. ALL: Autosuche für DTV, ATV und
Radio.
DTV: Autosuche für DTV und Radio.
ATV: Autosuche für ATV.
2. Drücken Sie die Menü Taste um den
Suchvorgang abzubrechen und zum
vorherigen Vorschau-Menü zurückzu-
kehren.
Wenn die Kindersicherung aktiviert ist, geben Sie bitte das Passwort ein,
um die automatische und manuelle Suche zu starten (Passwort: 0000).
DEUTSCH DEUTSCH
18
19
Grundfunktionen Grundfunktionen
Drücken Sie p  / q und wählen Sie “TV Anschluss” , stellen Sie hier auf “Satellit”.
Hier werden die Vorgänge im Einstellungsmenü gezeigt:
5V Antenne: AUS / AN (5Volt-Versorgung für aktive DVB-T Antennenleistung.
Tasten Aktion
hoch bewegt nach oben
runter bewegt nach unten
links wechsel zur Satellitenliste
rechts wechsel zur Transponderliste
Menü Zurück zum Menü
Exit Verlässt das Menü
Grün Satellit bearbeiten
Tasten Aktion
hoch bewegt nach oben
runter bewegt nach unten
Menü Zurück zur Transponderliste
Exit Zurück zum Menü
Option Value
LNB Typ 9750/10600, 9750/10750,
05150, 05750, 09750, 10600,
10750, 11300, 11475, User
Single, User Dual
LNB Power On / Off
22KHz Auto / Off / On
Toneburst Burst A, Burst B
DisEqC1.0 None (Aus), LNB 1-4
DisEqC1.1 None (Aus), LNB1-16
Motor None, DisEqC1.2, DisEqC1.3
Unicable Ein / Aus
Die Einstellungen sind Ab-
hängig von Ihrem System
und müssen angepasst
werden
Hier werden die Vorgänge in der Satelliten Liste gezeigt:
Tasten Aktion
hoch bewegt nach oben
runter bewegt nach unten
links wechsel zur Satellitenliste
rechts wechsel zur Transponder-
liste
Enter aktivieren und deaktivieren
eines Transponders
Menü Zurück zur Satellitenliste
Exit Verlässt das Menü
Rot Transponder hinzufügen
Grün Transponder bearbeiten
Gelb Transponder löschen
Blau Transponder absuchen
Hier werden die Vorgänge in der Transponder Liste gezeigt:
DEUTSCH DEUTSCH
20
21
Grundfunktionen Grundfunktionen
4. Eigenschaften
Lock (Sperren):
Dieses Menü ermöglicht es Ihnen, bestimmte Funktionen des Fernsehers zu sperren, so
dass sie nicht benutzt oder gesehen werden können. Sperren Sie einzelne Programme,
im Hotel Modus können hier komplette Menüs gesperrt werden. Wenn Sie das System-
Menü gelangen wollen, wird nach einem Passwort gefragt. Standardpasswort: 0000.
Hotel-Modus: Aktivieren / Deaktivieren der Hotel-Modus-Funktion.
Kanalsperre: Deaktivieren Sie die Kanäle.
Bildsperre: Deaktivieren Sie das Bildmenü.
Tonsperre: Deaktivieren Sie die Soundmenü.
Featuresperre: Deaktivieren Sie die Funktion im Menü.
Setupsperre: Deaktivieren Sie das Setup Menü.
Tastensperre: Deaktivieren Sie die Tasten auf dem TV-Gerät.
Source Lock: Deaktivieren Sie die gewünschte Eingangsquelle.
Einstellungen Quelle: Wählen Sie die Standardquelle, wenn Sie den Fernseher einschalten.
Kanalnummer: Wählen Sie die Standardkanalnummer, wenn Sie den Fernseher einschalten.
Max Lautstärke: Stellen Sie die max. Lautstärke für den TV ein.
Standard Lautstärke: Stellen Sie die Standardlautstärke ein.
Sperre löschen: Deaktivieren Sie alle Sperrungen (bedeutet, dass alle Sperrungen deaktiviert sind
und die max. Lautstärke beträgt 100.
Datenbank-Export: Exportieren Sie alle Hotel-Einstellungen auf einem USB-Gerät.
Datenbank-Import: Importieren Sie alle Hotel-Einstellungen von einem USB-Gerät.
Vorherige Seite: Wählen Sie Vorherige Seite, drücken Sie die OK-Taste,
um zur vorherigen Seite zurückzukehren.
Hotel Modus
Sperren aktivieren - Aktivieren / Deaktivieren Sie die Sperren Funktionen.
Hinweis: Wenn die Funktion aktiviert ist, wird die Altersbeschränkung und das ändern
des Passwortes gesperrt sein. Die Sendersuchfunktionen werden ebenfalls nicht abruf-
bar sein.
Altersbeschränkung - Aktivieren / Deaktivieren Sie die Altersbeschränkung.
Passwort ändern – Drücken Sie die OK Taste, geben zuerst den bisherigen Code ein,
anschließend den neuen, und bestätigen sie erneut mit OK.
Sprache: Hier können Sie die verschiedenen Sprachoptionen einstellen.
Zeit: Hier können Sie die Uhr einstellen (standardmäßig werden die
Informationen automatisch vom Digitalsignal genommen).
Abschalt Timer: Hier können Sie den Sleep-Timer so einstellen, dass sich der
Fernseher nach einer bestimmten Zeit automatisch abschaltet.
Automatische Der TV schaltet sich automatisch ab, wenn er nach einer gewissen
Abschaltung: Zeit nicht mehr bedient wurde.
Sie können wählen zwischen 1, 2, oder 4 Std.
CI Info: Pay TV ist Bezahlfernsehen. Hier benötigen Sie ein CI Modul mit
entsprechender Smartcard, die Sie bei Ihrem Fachhändler
bekommen. Dieser TV ist mit einem CI+ Modul und einer HD+
Smardcart auch HD+ tauglich.
PVR/ Timeshift: keine Funktion.
DEUTSCH DEUTSCH
22
23
MultimediabetriebGrundfunktionen
5. Einstellungen
OSD Zeit: Stellen Sie hier die Anzeigedauer der Informationen bei einem
Programmwechsel ein.
Auto SCART: Wechselt automatisch zur Scart-Quelle, wenn ein Gerät ange-
schlossen und eingeschaltet ist.
PC Einstellung: Ändern Sie die PC-Einstellungen im PC-Modus.
H/V-Position: Passen Sie die horizontale/vertikale Position des Bildschirms ein.
Phase: Passen Sie die Phase des Abtasttaktsignals des ADC relativ zu
dem Synchronisationssignal an, bis Sie ein stabiles Bild erhalten.
Uhr: Stellen Sie die Pixeltaktfrequenz so ein, bis die Bildgröße für den
Bildschirm maximiert ist.
Blue Screen: Aktiviert einen blauen Bildschirm beim Programmwechsel
Home Modus: Wählen Sie zwischen folgenden Modis: Home, Dynamic.
TV zurücksetzen: Setzt alle Einstellungen des TVs auf Werkseinstellung zurück.
Auto Installation: Startet die Erstinstallation.
Software Upgrade: Von Zeit zu Zeit wird es neue Fimware Updates geben, die
Verbesserungen am TV durchführt (Handling, weitere Optionen).
Besuchen Sie unsere Homepage für aktuelle Firmware-Updates.
Load Default Database: Laden Sie die Standard Proigrammliste (Werkssenderliste).
p  / q Datei/Ordner auswählen
Ausgewählte Datei wiedergeben bzw. Abspielen der Wiedergabeliste starten
OK Ausgewählten Ordner öffnen, ausgewählte Datei zur Wiedergabeliste hinzufügen
GRÜN Alle Dateien im aktuellen Ordner zur Wiedergabeliste hinzufügen/entfernen
ROT Ausgewählte Datei löschen
1. Schließen Sie einen USB Medium an den TV an. Drücken Sie die INPUT Taste auf der
Fernbedienung. Gehen mit den
p  / q Tasten auf die Medienquelle (USB) um in das
Multimediamenü zu gelangen.
2. Wählen Sie aus, ob Sie Fotos, Musik, Filme oder eBooks (t  / u/OK) wiedergeben
möchten.
3. Drücken Sie p  / q um den USB Stick auszuwählen und bestätigen Sie mit OK.
Hints for operation
Zurück zur
Geräteliste
Dateien
Vorschau
Informationen
DEUTSCH DEUTSCH
24
25
Multimedia Operation Multimedia Operation
1. Foto 3. Filme
4. eBook
2. Musik
Drücken Sie
t  / u um eine Op-
tion auszuwählen. Drücken Sie
OK um es zu bestätigen.
Hinweis: Drücken Sie die OK
Taste erneut, um die Leiste
wieder einzublenden.
Drücken Sie t  / u um eine Op-
tion auszuwählen. Drücken Sie
OK um es zu bestätigen.
Hinweis: Drücken Sie die OK
Taste erneut, um die Leiste
wieder einzublenden.
Ausgewähltes Foto anzeigen bzw. Abspielen der Wiedergabeliste starten.
Stoppen und verlassen des Vollbildmodus.
Vorheriges/Nächstes Bild in der Wiedergabeliste anzeigen
Bild drehen (90°, 180°, 270°, 0°)
Leiste zum Vergrößern des Bildes/Verschieben des vergrößerten Ausschnitts
einblenden.
Namen und technische Parameter des Fotos anzeigen
Zeigt die Fotoeinstellungen, wählen Sie hier Wiederholungsmodus, Hintergrund-
musik, Musikquelle, Überblendzeit, Effekt.
Wiedergabeliste anzeigen.
Ausgewählten Titel anzeigen bzw. Abspielen der Wiedergabeliste starten.
Stoppen und verlassen des Vollbildmodus.
Schneller Vor- oder Rücklauf.
Nächster oder vorheriger Titel.
Wählen Sie den Wiederholungsmodus.
Wechselt das Fenster zwischen “Information und “Playlist”.
Bildschirm abschalten (entspricht den Funktion der BLAUEN Taste).
Ausgewählten Film anzeigen bzw. Abspielen der Wiedergabeliste starten.
Stoppen und verlassen des Vollbildmodus.
Schneller Vor- oder Rücklauf
Spielen Sie den Film in Zeitlupe.
Spielen Sie den Film im Schritt-Modus.
Stellen Sie die A-B-Wiederholung Spielmodus ein.
Nächster oder vorheriger Titel.
Wiedergabeliste anzeigen..
Zeigt Informationen der aktuellen Datei an
Zeigt die Filmeinstellungen, wählen Sie hier Programm, Untertitel,
Audio-, Wiederholungs-Modus.
Zu einer bestimmten Wiedergabeposition springen
ROTE Taste: Hinzufügen oder Löschen des Lesezeichens.
GRÜNE Taste: Die Seite benennen.
GELBE Taste: Anzeige der Lesezeichen-Liste.
BLAUE Taste: Anzeige der Wiedergabeliste.
Springen Sie zur nächsten oder vorherigen Seite.
Drücken Sie t  / u um eine Op-
tion auszuwählen. Drücken Sie
OK um es zu bestätigen.
ALL
AB
DEUTSCH DEUTSCH
26
27
DVD Betrieb
DVD Betrieb
Drücken Sie die Taste INPUT, um den DVD-Modus auszuwählen. Wenn keine Disc im
DVD-Player eingelegt ist, wird „NO DISC“ angezeigt. Legen Sie die CD mit der richtigen
Seite in den CD-Schlitz ein. Die bespielte Fläche nicht berühren. Halten Sie die Disc an
der Außenseite mit den Fingern fest. Der DVD Player wird automatisch die Disc in den
Player ziehen. Um die CD auszuwerfen, drücken Sie die Auswurftaste auf dem Fernseher
oder die „EJECT“-Taste auf der Fernbedienung.
Wählen Sie hier die Menü Sprache.
Starten Sie den Bildschirmschoner. Er schaltet sich automatisch ein, wenn der Player län-
gere Zeit nicht benutzt wird, um evtl. Schäden am TV Panel zu vermeiden.
EIN: Starten Sie den
Bildschirmschoner
AUS: Entfernen Sie den
Bildschirmschoner
Wählen Sie zwischen Ein oder Aus.
Modus Ein: Die Einstellung wird gespeichert und das Gerät startet mit der gleichen
Option, wie Sie es ausgeschaltet haben.
Modus Ein: Das Gerät geht zurück zur Standardeinstellung.
DVD Einstellung
Allgemeine Einstellungen
Menü Sprache
Bildschirmschoner
Letzte Wiedergabe
Der Setup-Modus bietet das Menü für die Konfigurationen: Allgemeines Setup-
Menü, Audio-Setup-Menü, Dolby Digital, Einstellungen, Bevorzugte Einstellungen.
Wählen Sie die einzelnen Punkte mit den Pfeiltasten und der OK Taste aus.
Drücken Sie auf die Setup Taste um in das Menü zu gelangen mit der Pfeiltaste nach
rechts gelangen Sie in das Untermenü.
Drücken Sie die Setup Taste erneut um das Menü zu verlassen.
4:3 Pan Scan
Breitbild-Sendungen werden auf dem Bildschirm angezeigt, aber einige Teile vom
Bild werden automatisch abgeschnitten.
4:3 Letter Box
Breitbild-Sendungen werden auf dem Bildschirm angezeigt, aber mit schwarzen
Balken am oberen und unteren Bildschirmrand.
Wide
Einstellung für Breitbildfernseher.
DEUTSCH DEUTSCH
28
29
DVD Betrieb DVD Betrieb
Audio Einstellung
Dolby Digital Setup
Bevorzugte EinstellungenDownmix
Lautsprecher einstellen
Drücken Sie
q um die Lautsprecher Einstellungen auszuwählen, drücken Sie die
OK Taste u (Play) um in das Lautsprecher Menü zu gelangen.
Dynamisch
Diese Option wird verwendet, um das Kompressionsverhältnis zu steuern und
somit den Klang zu verbessern.
Sie müssen 2x Stop drücken um in die Einstellungen zu gelangen. LT/RT
Eine Disc mit einer Multikanal Tonspur wird als Ausgangssignal in den linken und
rechten Kanal verteilt.
Stereo
Eine Disc mit einer Multikanal Tonspur wird als Ausgangssignal in Stereo umge-
wandelt.
PAL
Diese Option wird gewählt, wenn der DVD-Player mit einem PAL TV-System
verwendet wird (Standard in Europa).
Multi
Der DVD Player wird den TV automatisch nach der eingelegten Disc einstellen.
NTSC
Diese Option wird gewählt, wenn der DVD-Player mit einem NTSC-System
verwendet wird.
Audio
Untertitel
Disc Menü
Kinderschutz
Passwort
Wenn mehrere Sprachen auf einer Disc verfügbar sind, können Sie die Sprache hier
auswählen. Andernfalls wird die Standardsprache von der Disc wiedergegeben.
Wenn mehrere Untertitel auf einer Disc verfügbar sind, können Sie die Untertitel hier
auswählen. Andernfalls wird der Standarduntertitel von der Disc wiedergegeben.
Wenn mehrere Sprachen auf einer Disc verfügbar sind, können Sie die Sprache hier
auswählen. Andernfalls wird der Standardsprache von der Disc wiedergegeben.
Wenn Sie die Disc mit Kindersicherung abspielen, können Sie eine Alterskontrolle nach
einem gewünschten Grad auswählen. Wenn z.B. PG ausgewählt wird, kann keine DVD
höher alt die PG-Klasse abgespielt werden.
P
PG
PG 13
PGR
R
NC 17
ADULT
Sie können das Passwort für die Altersfreigabe ändern. Gehen Sie dazu in das Passwort-
menü.
Hinweis: Das Standard Passwort ist 123456.
DEUTSCH DEUTSCH
30
31
DVD Betrieb DVD Betrieb
Standard
Hier können Sie die original Standard Einstellungen wählen.
Fehlerbehebung Konformitätserklärung
DEUTSCH DEUTSCH
32
33
Lesen Sie bitte die folgenden Informationen, um die mögliche Ursache zu einem Prob-
lem herauszufinden, bevor Sie sich an den Kundendienst wenden.
TV lässt sich nicht einschalten
Überprüfen Sie, ob das Stromkabel korrekt an der Steckdose und dem Stromadap-
ter angeschlossen ist.
Überprüfen Sie, ob das Kabel des Stromadapters korrekt am TV Gerät angeschlossen ist.
Der elektronische Schaltkreis wurde evtl. zurückgesetzt. Ziehen Sie das Netzteil aus
der Steckdose, warten Sie 1 Minute, und schließen Sie dann den Stecker wieder an.
Kein Bild
Überprüfen Sie, ob das Antennenkabel korrekt angeschlossen ist.
Überprüfen Sie, ob der richtige Eingang ausgewählt wurde; verwenden Sie die
Taste INPUT.
Überprüfen Sie die Helligkeit- und Kontrasteinstellungen im Bildeinstellungen.
Kein Ton
Überprüfen Sie, ob der Ton ausgeschaltet oder die Stummschaltung aktiviert ist
(MUTE).
Erhöhen Sie vorsichtig die Lautstärke.
Prüfen Sie, ob die Audio-Kabel an den korrekten Eingängen angeschlossen sind.
berprüfen Sie, ob das Antenne
Schlechte Bildqualität
Prüfen Sie, ob der korrekte Eingang ausgewählt ist; verwenden Sie die Taste INPUT.
Überprüfen Sie die Verbindung zum TV Fernsehgerät.
Überprüfen Sie die Videoeinstellungen.
Bild zu gross/klein oder verzerrt
Benutzen Sie die Taste ASPECT, um die Darstellung des Bildes zu ändern.
Fernbedienung arbeitet nicht
Wechseln Sie die Batterien.
Benutzen Sie die Fernbedienung in der spezifizierten Reichweite (max. 5 Meter und 30 °)
Vermeiden Sie direkte Lichteinstrahlung in den Infrarotsensor.
Hinweis:
Gewicht und Abmessungen sind nicht die absolut exakten Werte.
Technische Details können jederzeit geändert werden (nach Hersteller) ohne vorherige
Ankündigung.
Konformitätserklärung
Hiermit wird die Übereinstimmung mit folgenden Richtlinien/Normen bestätigt:
Richtlinie zur elektromagnetischen Verträglichkeit 2004/108/EG
EN 55013: 2001 + A1: 2003 + A2: 2006
EN 55020: 2007
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
Niederspannungsrichtlinie 2006/95/EG
EN 60065: 2002 + A1: 2006 + A11: 2008
规格要求
计划表
商标
设计
审核
尺 寸:
颜色要求:
标贴材料:
特殊要求:
----标贴
131096
LTC
王慧芳
60x120mm
封样确认
能耗标贴
PET-01
A
2011
16
40
33,6
23
CTV 16 Plus
Megasat
Stand: v1.0 Januar 2014
English
Brillantes FernsehenBrillantes Fernsehen
USER MANUAL
CTV 16 Plus
Content Caution
ENGLISH ENGLISH
02
03
The lightning flash with arrowhead symbol, within an equilateral tri-
angle is intended to alert the user to the presence of un-insulated dan-
gerous voltage within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to the persons.
Correct disposal of this Product
This symbol indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To
ensure the correct waste treatment of the product and battery, please
dispose them in accordance to any applicable local laws of require-
ment for disposal of electrical equipment or batteries. In so doing, you
will help to conserve natural resources and improve standards of en-
vironmental protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
This symbol means that electrical and electronic equipment, at their
end of life should be disposed of separately from your household was-
te. Please dispose of this equipment at your local community waste
collecyion/recycling center. In the USA there are separate collection
systems for used electrical and electronic products. Please help us to
conserve the environment we live in!
Caution...........................................................................................................03
Safety Information ..................................................................................04
Accessories ..................................................................................................05
Specification ...............................................................................................05
Product Introduction
Front View ...........................................................................................06
Connections ......................................................................................07
Remote Control ...............................................................................08
Auto Installation .................................................................................. 10
Basic Operation
OSD menu ..........................................................................................13
Sound menu .....................................................................................14
Channel menu .................................................................................15
Feature menu ...................................................................................20
Setup menu ....................................................................................... 22
Multimedia Operation
Photo ......................................................................................................24
Music ...................................................................................................... 24
Movie .....................................................................................................25
eBook .....................................................................................................25
DVD Operation
General setup ...................................................................................26
Audio setup .......................................................................................28
Dolby Digital ......................................................................................29
Preference setup ............................................................................. 29
Troubleshooting .................................................................................. 32
Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv
Safety Information Accessories
Specications
ENGLISH ENGLISH
04
05
1. CTV 16 Plus
2. Remote control
3. 2x Batteries
4. Converter cable AV
5. Converter cable YUV
6. Power supply
7. 12 V car cable
To ensure reliable and safe operation of this equipment, please read carefully all the inst-
ructions in this user guide, especially the safety information below.
To prevent overload, don‘t share the same mains supply socket with too many other
items of equipment.
Do not place any connecting wires where they may be stepped on or tripped over.
Do not place heavy items on the leads, which may damage them.
Hold the Mains plug, not the wires, when removing from a socket.
During a thunderstorm or while leaving the TV for long periods, disconnect the ae-
rial (if outdoor) and the power supply.
Do not allow water or moisture to enter the TV . Do NOT use in wet or moist areas
such as Bathrooms, steamy kitchens or near swimming pools.
Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2“) clearance all around the unit.
Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take
good care of the remote control, do not drop it or allow it to come into contact with
liquids.
To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
Electrical safety
Physical safety
Pull the plug out immediately, and seek professional help if:
the mains plug or cable is damaged
Liquid is spilt onto the set, or if it is accidentally exposed to water or moisture
Anything accidentally penetrates the ventilation slots
The set does not work normally.
Do NOT remove the safety covers. There are no user serviceable parts inside. You
may invalidate the warranty. Qualified personal only are permitted to service this
apparatus.
To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
Do NOT break open or throw exhausted batteries on a fire.
Display LED display (Pixel class 1)
Screen size 15,6“ (39,6 cm)
Resolution 1366 x 768
Contrast ratio 800 : 1
Brightness value 250 cd/m²
Viewing angle 170° H / 160° V
Types of Reception DVB-S / DVB-S2 / DVB-T / DVB-C
Speaker 2x 3 W (Stereo)
Connections RF input (DVB-T & DVB-C)
ZF input (DVB-S)
PC input (D-Sub)
Audio input coaxial (S/PDIF)
Audio input 3,5 mm
Audio output 3,5 mm
HDMI input
Video / Audio (L/R) (with adapter)
YUV (with adapter)
USB 2.0 (Mediaplayer / Softwareupgrade)
Scart
CI+ slot yes (HD+ ready)
DVD player (integrated sideways) DVD-R/-RW/+R/+RW, VCD, CD, CD-R/-RW
Playback formats video / photo / audio MPEG 1-4, VOB, AVI, XVID / JPEG / MP3,
AC3, MP2, MPEG1, PCM, LPCM, OGG
Power supply AC 100 V ~ 240 V, 50/60 Hz / DC 12 Volt
Power consumption working / standby max. 23 W / < 0,5 W
VESA standard 100 x 100 mm
Product Introduction Product Introduction
ENGLISH ENGLISH
06
07
1. (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power ON / Power OFF) LED indicator: Press POWER to turn on and off.
indicator on (green) = Power on mode
indicator off (red) = Standby mode
2. The functions of the buttons are described as bellows:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu, press again to exit the menu.
CH +/-: Press to scan through channels.
VOL +/-: Press to adjust the volume.
PLAY: Play/Pause the programm.
EJECT: Eject the disc.
POWER: Turn on/off the TV set.
Front View Side View Connections
POWER: Connect to the mains adaptor.
HDMI: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display. Connect it to the D-Sub 15 pins analog output
connector of the PC.
PC-IN: Connect it to the audio output terminal of PC.
SCART: Connect them to the SCART video output terminal of DVD.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
Coax: Digital output to AV receiver.
MINI AV: Connect it to the audio & video output terminal of DVD with the
Converter cable. (Audio terminals are shared with YPbPr)
MINI YPbPr: Connect it to the YPbPr video output terminal of DVD with the
Converter cable.
USB: Connect to USB device for multimedia
DVB-S2: Connect a Satellite signal.
Common Interface: CI slot.
Headphone: Connect it to your headphone or other audio equipment.
POWER
MINI
AV
MINI
YPbPr
USB DVB-S2 Common Interface CI+
Kopfhörer
HDMI VGA PC IN SCART ANT IN COAX
Product Introduction Product Introduction
ENGLISH ENGLISH
08
09
POWER : Turn the TV on/standby.
MUTE : Press to mute the sound,
press again or press VOL+ to unmute.
PICTURE: Select the picture mode.
ASPECT: Change the screen display mode.
SOUND: Select the sound mode.
SLEEP: Standby timer.
FAV: Display the favorite program list.
NR. BUTTONS: Press 0-9 to select a TV channel
directly when you are watching TV.
Return to the previous channel viewed.
INFO: Press to display the current
modes information.
INPUT: Press to display the input source menu.
MENU: System setup menu.
EXIT: Exit the OSD menu.
CURSOR KEYS: Allows you to navigate OSD menus and
adjust the system settings to your preference.
VOL +/-: Adjust the volume.
CH +/-: Scan through channels.
EPG: To show the Electronic Program Guide during
no-menu state only in DTV mode.
TV/RADIO: Switch to TV/RADIO.
EJECT: Load/eject DVD disc.
REC: no function.
Play/Pause program.
Previous chapter.
Next chapter.
Stop program.
Fast reverse.
Fast forward.
SUBTITLE: Turn on/off the subtitle display in DTV mode.
CH.LIST: Display the channel list.
REC.LIST: Record List.
TV/TXT: Turn off/on the Teletext display.
CANCEL: Cancel the Teletext display.
REVEAL: Reveal any hidden text.
NICAM/A2: TV Nicam/A2 select.
INDEX: Go to index.
HOLD: Hold or carry on the current subpage.
SIZE: Press to see top half of page double size,
Press again to see the bottom half of page
double size. Press again for normal size.
SUBPAGE: Press to enter subpages, pressagain to cancel.
D.PRO: Edit the program and play.
D.REP: Repeat playing the title or chapter.
D.GOTO: Play your favorite title/chapter/track.
D.SLOW: Play DVD programs at slow speed.
D.ZOOM: Adjust picture size in DVD mode.
D.TITLE: DVD title.
D.SET: DVD system setup.
D.MENU: DVD play list/Disc menu.
D.SUB: Turn on/off the subtitle display in DVD mode.
D.LAN: Select DVD disc language.
Remote control
Auto Installation Auto Installation
ENGLISH ENGLISH
10
11
At the initial start of the Megasat CTV 16 Plus, it shows Auto Installation. This is divided
into 6 steps. Please select your personal settings.
With the green button to go to the next step, with the red button to go back one step.
Step 1
Home Mode:
Home state
Dynamic settings
Step 4
Automatic standby:
choose the required auto standyby
(off, 1 hour, 2 hour or 4 hour)
Step 2
Country:
choose the required country. (Germany)
Step 5
Service:
select the required operating mode
(DVB-T, cable, satellit)
Step 3
Language:
choose the required language.
(german)
Step 6
Satellite Setup:
select the preset list, or choose satellite
system to make your own settings. For
settings details, refer to „Basic Operation“
on page 17.
Basic Operation Basic Operation
ENGLISH ENGLISH
12
13
Power on/o
1. Connect to the power supply with the adaptor.
2. To turn on the TV -> Press POWER button on the TV or remote control.
To turn off the TV -> Press POWER button on the TV or remote control.
1. Picture menu
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Input Source select
Press INPUT button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or up/down button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the connections are
prepared.
Picture Mode: Select your desired picture mode from Dynamic, Standard,
Mild and User.
Brightness: Adjust image black level.
Contrast: Adjust image contrast.
Sharpness: Adjust the sharpness(Gray and invalid in VGA/PC mode).
Colour: Adjust image colour from black and white.
Tint: Control the tint (NTSC mode only).
Colour Temp.: Select an optimum color temperature mode to suit your eyes
for viewing from Warm, Cool, Standard.
Aspect Ratio: Change the aspect for the screen from 4:3,16:9, Zoom 1, Zoom 2
or Panorama etc...
Noise Reduction: If the broadcast signal received is weak, you can select the
Noise Reduction option to reduce the video noise level between Off,
Low, Middle and High.
Use
p  / q button to select the main menu, and press u / OK button to enter the subme-
nu. In the submenu, use p  / q button to select the function item, press u / OK button
to enter the setup menu, then press t  / u button to adjust, or press p  / q to select and
press OK / t  / u button to confirm.
* Press MENU / t button to return to the upper menu.
* Press EXIT button to exit the menu display.
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
Main menu: Picture | Sound | Channel | Feature | Setup
Submenu
(Picture menu
for example)
You should
operate the OSD
menu according
to the hint.
Basic Operation Basic Operation
ENGLISH ENGLISH
14
15
2. Sound menu 3. Channel menu(In ATV/DTV mode)
Sound Mode: Select your desired sound mode from Standard, Movie, Music,
Speech and User.
Bass: Adjust the level of the lower-pitched sounds.
Treble: Adjust the level of the higherpitched sounds.
Balance: Adjust the audio output between left and right speakers.
Surround: Turn on/off the surround sound function.
Auto Volume Level (AVL): The volumes of all sources will be maintained when the
functions on.
SPDIF: Select the spdif mode for the TV from off, PCM and Auto.
Channel Management: Enter the Channel management menu to edit the channels.
Delete:
Press RED button to sign the channels
you want to delete, it will hint you when
you exit.
Lock:
User must set the “Lock enable
(Feature-Lock- Lock enable) at ON to
active this function. Press GREEN button
to sign (lock) or cancel (unlock) the
channel. And you have to enter the password to view the program.
Skip:
Press YELLOW button to skip the channel or cancel the setting, and the program
will not be programed by CH+/- button.
Move:
Press BLUE button to sign the channel,
press
p  / q button to move, and press
OK button to move the position.
Favorite Management:
Add or remove favourite channels by
the colour buttons. Up to 4 favourite lists
are available, RED-Fav1, GREEN-Fav2,
YELLOW-Fav3, BLUE-Fav4.
ENGLISH ENGLISH
16
17
Basic Operation Basic Operation
Country: Select the country.
TV Connection: Select DTV type, you can choose Air(DVB-T), Cable(DVB-C),
Satellite(DVB-S2), as you like.
DTV Manual Search: Enter the DTV Manual Search menu.
Press
p  / q button to select the “Channel” item, and press t  / u button to select the
channel, then press p  / q button to select the “Start item, and press t  / u button to
manual search.
Current Channel: Select the current channel for manual searching.
Search: Press OK button to enter the search menu, and manual search the frequency by
t  / u button.
Fine Tune: Press OK button to enter the Fine tune menu, and fine tune the frequency
Select Auto Search as follow:
Option Value
Mode Default, Network Search, Full Search
Satellite 65 satellite for searching (3 user edit satellite)
Service Type All Services,Free Service
Channel All, TV Only
Operations in satellite Auto Search menu are shown in the following table
ATV Manual Search: Enter the ATV Manual Search menu.
Satellite System
Press
p  / q button to select the TV Conection” , and set it on “Satellite.
Auto Search: Press OK button to enter the Auto Search menu, select search
mode, and press OK button to start Auto search.
Note:
1. ALL: Auto search channels for DTV,
ATV and Radio.
DTV: Auto search channels for DTV
and radio.
ATV: Auto search channels for ATV.
2. When the TV is auto tunning, you
could press MENU button to stop auto
tunning and return to preview menu.
When the child lock is on, please enter the password (lock password in
future menu) to start Auto and Manual search.
ENGLISH ENGLISH
18
19
Basic Operation Basic Operation
Press p  / q button to select the TV Conection” , and set it on “Satellite.
Operations in Setting Menu are shown in the following table:
5V antenna power:
Turn on/off the 5V antenna power output.
Press
p  / q button to select the “Satellite System , show as follow:
Key Stroke Action
KEY_UP use cursor to up
KEY_DOWN use cursor to down
KEY_LEFT switch operation to satellite
system parameters setting list
KEY_RIGHT switch operation to
Transponder list
KEY_MENU Back to Main Menu.
KEY_EXIT Exit Main Menu.
KEY_GREEN Enter satellite edit menu
Key Stroke Action
KEY_UP use cursor to up
KEY_DOWN use cursor to down
KEY_MENU Back to Transponder list.
KEY_EXIT Exit Main Menu.
Option Value
LNB Type 9750/10600, 9750/10750,
05150, 05750, 09750, 10600,
10750, 11300, 11475, User
Single, User Dual
LNB Power On / Off
22KHz Auto / Off / On
DisEqC Mode Off, LNB1, LNB2, LNB3,
LNB4, Burst A, Burst B
Motor None, DisEqC1.2, DisEqC1.3
Operations in Satellite List Menu are shown in the following table:
Key Stroke Action
KEY_UP use cursor to up
KEY_DOWN use cursor to down
KEY_LEFT switch operation to
Satellite list
KEY_RIGHT switch operation to
satellite system parameters
setting list
KEY_ENTER Select/unselect cursor item
Transponder.
KEY_MENU Back to Satellite list.
KEY_EXIT Exit Main Menu.
KEY_RED Enter Transponder Add
menu
KEY_GREEN Enter Transponder Edit
menu
KEY_YEL-
LOW
Enter Transponder Delete
confirm menu
KEY_BLUE Enter Transponder scan
menu
Operations in Transponder List Menu are shown in the following table:
ENGLISH ENGLISH
20
21
Basic Operation Basic Operation
4. Feature menu
Lock Channel:
This menu allows you to lock certain features of the television so that they can not be
used or viewed. For example if you don’t want certain channels viewed by children or
if the television is to be used in a hotel and you want certain channels be locked. When
you enter the system lock menu you will be asked for a password. As default it is 0000.
Hotel Lock: Turn on/off the Hotel Lock function.
Channel Lock: Disable the Channel menu in OSD.
Picture Lock: Disable the Picture menu in OSD.
Sound Lock: Disable the Sound menu in OSD.
Feature Lock: Disable the Feature menu in OSD.
Setup Lock: Disable the Setup menu in OSD.
Key Lock: Disable the buttons on the TV set.
Source Lock: Disable the input source you desired.
Set Source: Select the default source when you turn on the TV.
Channel Number: Select the default channel number when you turn on the TV.
Max Volume: Set the Max volume for the TV.
Default Volume: Set the default volume when the program is on.
Clear Lock: Clear all the locks above,
it means set all the locks to OFF and max volume to 100.
Database Export: Export all Hotel Settings to the USB device.
Database Import: Import all Hotel Settings from the USB device.
Previous Page: Select Previous Page items, press the ok button
to return to the previous page.
Hotel Mode - Enter the Hotel Setting menu.
Lock Enable - Turn on/off the Lock functions.
Note: When it is be turned on, the functions of Parental Guidance and Change Pin code
below will be locked, and the functions Lock(in Channel Management), Auto Search, DTV
Manual Search, ATV manual Search in Channel menu will also be locked.
Parental Guidance - Select the Parental Guidance mode, or turn off the function.
Change Pin Code – Press OK button to enter, first enter the current code, then enter
your new code and confirm your new code.
Language: Lets you adjust the different language options available.
Clock: Allows you to set the clock (as default the information is taken
automatically from the digital signal).
Sleep Timer: Lets you set the sleep timer so the television automatically switches
off after a certain amount of time.
Auto Power O: The TV will switch off itself automatically if no change in status
within the time you select. You can choose 1H, 2H, 4H or off.
CI Info: Pay per view services require a smartcard” to be inserted into the
TV. If you subscribe to a pay per view service the provider will issue
you with a ‘CAM’ and a smartcard”. The CAM can then be inserted
into the COMMON INTERFACE PORT (CI Card In).
PVR/ Timeshift: no function.
ENGLISH ENGLISH
22
23
Multimedia OperationBasic Operation
5. Setup menu
OSD Timer: Lets you adjust the amount of time the On Screen Menu stays on
the screen before disappearing.
PC Setup: Change the PC Settings in PC mode.
Auto Adjust: Setup the parameter of the screen automatically.
H/V-Position: Adjust the transverse/vertical position of the screen.
Phase: Adjust the phase of the ADC sampling clock relative to the sync
signal, until a stable image is obtained.
Clock: Adjust the pixel clock frequency, until the image size is
maximized for the screen.
Blue Screen: Changes the background when there is no input between clear
and a blue background (Only available in some sources).
Home Mode: Press to select from the following home modes: Home, Dynamic.
Reset TV Setting: This clears all the TV settings for the television.
Auto Installation: Start the first installation.
Software Upgrade: From time to time we may release new firmware to improve
the running of the television (available to download). This menu
lets you upgrade that software onto the television. Further details
of how to do this will be issued with the firmware. Contact the
helpline or refer to the product support section of the website.
Load default Database: Import the default satellites and channel, so that the user can
watch programs directly.
Press
p  / q buttons to move (press OK button to select the file or unfold the folder).
Press RED button to delete the file; Press GREEN button to sign or cancel all the files to
playlist. Press t  / u OK button to sign or cancel the selected file to playlist. Press button
to previous menu, Press EXIT button to select the file view type list (t) or thurnbnail (u).
Press Exit again to veturn to the root MENU. Then press u button to program the files (be
signed) you select or the files in the fold you select. Press n button to stop and exit the
full screen program, please notes the hints on the bottom.
1. Press the INPUT button on the remote control to display the input source menu, select
Media source by the
p  / q buttons, and press OK button to enter the Multimedia
menu as shown below.
2. Insert USB device, and select the Media mode form Photo, Music, Movie and eBook,
then you will find the name of the device display on the screen as shown below.
3. Press p  / q button to select the USB device and press OK button to enter the file list
as shown below.
Hints for operation
Return to
device list
file list
preview
information
ENGLISH ENGLISH
24
25
Multimedia Operation Multimedia Operation
1. Photo 3. Movie
4. eBook
2. Music
Press
t  / u button to select
the option on the table, and
press OK button to change.
Note: You could press OK but-
ton to display the option table
when it disappears.
Press t  / u button to select
the option on the table, and
press OK button to change.
Note: You could press OK but-
ton to display the option table
when it disappears.
Play/Pause the photo playing.
Stop and exit the full screen program.
Play the previous or next file directly.
Ratate the picture (0, 90, 180, 270).
Zoom in/out the picture, you could move the picture by Cursor left/right/up/
down button in Zoom mode.
Display the information of the current file.
Display the photo setup menu, and select the Repeat mode, Background Music,
Music Source, Slide Time, Effect.
Display the playing list.
Play/Pause the photo playing.
Stop and exit the full screen program.
Play fast backword or forword.
Play the previous or next file directly.
Select the repeat mode for playing music.
Switch the window between “Information and “Playlist”.
Switch off the screen displaying (BLUE button as quick button),
and it will be turned on by exepet power button).
Play/Pause the photo playing.
Stop and exit the full screen program.
Play fast backword or forword.
Play the movie in slow mode.
Play the movie in step mode.
Set the A-B repeat playing mode.
Play the previous or next file directly.
Display the playing list.
Display the information of the current file.
Display the movie setup menu, and setup the Program, Subtitle, Audio, Repeat mode.
Goto mode, Input the time and start playing directly.
RED button: Add or delete the bookmark.
GREEN button: Goto the appoint page.
YELLOW button: Display the bookmark list.
BLUE button: Display the playlist.
Turn to previous/next page of the text.
Press t  / u button to select
the option on the table, and
press OK button to change.
ALL
AB
ENGLISH ENGLISH
26
27
DVD Operation
DVD Operation
Press the Power button on the TV or the remote control, then press the INPUT button
to select DVD mode. If there is no disc in the DVD player the screen will show „NO DISC“.
Insert Disc according to picture next to disc slot. Do not touch the playing surface. Hold
the disc around the outside with your fingers and place the disc into the slot. The player
will automatically draw the disc into the player. To „Eject“ the disc, press the EJECT button
on the TV or the „ EJECT„ button on the remote control.
This is used to select the OSD language.
Start the Screen Saver, the Screen saver image will appear when the player stops or the
picture is frozen for a few minutes. This saver can keep the screen from being damaged.
ON: Start the screen saver
OFF: Revome the screen saver
Can set the items on the last memory, „on“ an „off“ option.
Select „on“, the shutdown will shutdown the machine before the settings the memory,
re-boot the machine settings. Set near the same time.
Select „off, every time the machine automatically switched back to the default settings.
ON: Start the memory
OFF: Revome the memory
DVD Setup Mode
General Setup Page
OSD Language
Screen Saver
Last Memory
Setup Mode provides the menu for the configuration of General Setup Page, Audio
Setup Page, Dolby Digital, Setup, Preference Page.
Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP
button and the OK button.
Press SETUP button first, enter into SETUP menu, then press the DIRECTION RIGHT
button, you can enter into the next Sub-menu.
Press the SETUP button again to exit the Setup Menu.
4:3 Pan Scan
This is selected when the DVD Player is connected to a normal TV. Wide-screen
images are shown on the screen, but with some parts cut automatically.
4:3 Letter Box
This is selected when the DVD Player is connected to a normal TV. Wide-screen
images are shown on the screen, with black belt on the top and bottom.
Wide
This is selected when the DVD Player is connected to a wide-screen TV.
ENGLISH ENGLISH
28
29
DVD Operation DVD Operation
Audio Setup
Dolby Digital Setup
Preference SetupDownmix
Speaker Setup
In the „Audio Setup page“ press
q button to select „Speaker Setup“ item, press the
OK button or u button (play) into the „Speaker Setup page“.
Dynamic
This option is used to set the compression ratio in order to control the sound
contrast.
You must press STOP twice to enter Preference page or NO DISC. LT/RT
A disc recorded multi channel soundtrack, the output signal will be incorporated
to left and right channel.
Stereo
A disc recorded multi channel soundtrack, the output signal will be incorporated
to stereo.
PAL
This is selected when the DVD player is connected to an PAL TV System.
Multi
The DVD player will set the TV system according to the disc in the tray
NTSC
This is selected when the DVD player is connected to an NTSC TV System.
Audio
Subtitle
Disc Menu
Parental
Password
If a language listed below is recorded on a disc, you can play the sound in such langua-
ge. If not, the language recorded will be used.
If a language listed below is recorded on a disc, you set the subtitle to be displayed in
such language. If not, the language recorded will be used.
If a language listed below is recorded on a disc, you can set the menu to be displayed
in such language. If not, the language recorded will be used.
When playing disc with parental lock function, you may select an Age Control Grade
according to grade of disc and your own preference. For example, if PG selected, DVD
video disc rated higher than the PG grade cannot be played.
P
PG
PG 13
PGR
R
NC 17
ADULT
User can change the password that is required when the user wants to change the Age
Control Grade in the Parental Lock funktion.
Note: The default password is: 123456
ENGLISH ENGLISH
30
31
DVD Operation DVD Operation
Default
User can load the original factory setting by choose RESET an press OK button.
Troubleshooting Declaration of Conformity
ENGLISH ENGLISH
32
33
If the display fails or performance dramatically deteriorates check the Display in ac-
cordance with the following instructions.Remember to check the peripherals topinpiont
the source of the failure.
If the display still fails to perform as expected,connect your helpline for assistance.
No power
Check all connections to the TV.
Press either the power button or the Standby button on the Remote control.
No picture or sound
Ensure that the TV is plugged in and the power is on.
Ensure that the aerial is connected.
Try a different program.
Poor picture quality
Check the aerial connections.
Check that the channel is tuned in properly.
Adjust the picture settings:brightness,color,sharpness,contrast,hue.
Make sure that the TV is not located close to electrical appliances that may emit
radio frequency interference.
No colour
Adjust the color setting.
Check that the programme is broadcast in color.
Check that the channel is tuned properly.
TV does not respond to remote control
Check that there are no obstructions between the remote control and the unit.
Check that the remote control is within range of the unit.
Check that the batteries in the remote control and not weak or exhausted.
This TV is for household use and registered as harmless on electromagnetic waves.
Therefor, you can use it in every location as well as residential areas.
Note:
Weight and dimensions are not absolutely exact values .
Technical details can be changed at any time (according to manufacturer) without prior
notice.
Declaration of Conformity
This complies with the following directives / standards is confirmed:
Electromagnetic Compatibility Directive 2004/108/EG
EN 55013: 2001 + A1: 2003 + A2: 2006
EN 55020: 2007
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
Low Voltage Directive 2006/95/EG
EN 60065: 2002 + A1: 2006 + A11: 2008
规格要求
计划表
商标
设计
审核
尺 寸:
颜色要求:
标贴材料:
特殊要求:
----标贴
131096
LTC
王慧芳
60x120mm
封样确认
能耗标贴
PET-01
A
2011
16
40
33,6
23
CTV 16 Plus
Megasat
Status: v1.0 January 2014
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Megasat CTV 16 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Megasat CTV 16 Plus in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info