13
GB
3 Operating
• Place the massage seat
on a high chair or armchair
(Car seat)
and attach
it to this by means of the fasteners on the back.
•
Connect the power supply unit cable
or the adapter cable
to the con-
nection on the massage mat.
•
Plug the power supply unit
into the electric socket or plug on the adapter
cable
into the cigarette lighter.
• Now sit on the seat
and familiarise yourself with the controls.
The massage seat has four massage zones for specific treatment. These are in
the main areas of tension (shoulders, back, waist and thighs). Different mas-
sage programmes with different speeds can be selected for each massage
zone.
The timer switches the device off automatically once the selected time of 15,
30 or 60 minutes has elapsed.
• I/0
(Voltage supply):
Switch on: Press the I/0 button.
Switching off: Press the I/0 button again. To reset after timer shuts off, push
either I/0 or HEAT button
.
CAUTION
Make sure that the maximum operating time of 60 minutes is
not exceeded.
• HEAT
:
Press the HEAT button to switch the heater on. When the heater is on the red
LED illuminates. The waist area is heated. Pressing the HEAT button again
switches the heater off. The heat function can operate separately or combined
with MASSAGE function.
• INTENSITY
(Intensity):
Press the INTENSITY button to set the required intensity.
• MODE
(Massage type):
Select one of the following functions, 1 to 5.
AUTO: This is the standard massage type when the unit is switched on. In Auto
mode, the device runs through all the types of massage one after the other
automatically. Each press of the MODE button switches to the next massage
type.
KNEADING: Press the MODE button once after switching on. This massage type
is like a Shiatsu massage.
PULSATE: Press the MODE button twice after switching on. The massage
motors pulsate alternately.
TAPPING: Press the MODE button three times after switching on.
3.3
Buttons on the
control unit
3.1
Preparation
3.2
Operating the
unit
