15 x 15 mm
14.10.2009 08:05
9
electricity supply to your device or to release the device from voltage
completely
Only operate the plug-in power pack at an AC 100-240 V~ 50 Hz
earthed socket. Ask your energy supplier, if you are not sure about the
power supply at the set-up location.
Only use the plug-in power pack supplied with the device. (Ktec
KSAD1200150W1UK). Never attempt to connect the plug of the plug-in
power pack at other sockets, because damage can be caused
otherwise.
We recommend the use of protection against excess voltage for
additional safety, in order to protect the device against damage by
voltage peaks or a flash of lightning from the electricity network.
Pull the plug-in power pack out of the socket to interrupt the power
supply.
The plug-in power pack must also be easily accessible after connection,
so that it can be separated from the mains quickly if needed.
Do not cover the plug-in power pack, to avoid overheating.
Pay attention that the cable complies with the VDE requirements, if you
use an extension cable. Ask your electrician if necessary.
Lay the cable so that no-one can tread on it or trip over it.
Do not place any objects on the cable, because it could be damaged
otherwise.