9
Smart Humidity Mode and Night Mode
Night mode can be set whilst the dehumidifier is in smart humidity mode by pressing the night mode /
child lock button once. The fan speed will be reduced to low; the buttons will not bleep when pressed
and all lights on the display will turn off (the night mode indicator will turn off 3 seconds later than the
rest of the display).
Using the variable humidistat
If you want to set your dehumidifier to reach a target other than 55%rh, continue to press the smart
humidity mode button to scroll through the options in the following order: 40, 45, 50, 55, 60, 65, 70, CO.
Once you have reached your desired target, the target will show on the display for 5 seconds and then
change to the current humidity level.
CO stands for Continuous. With this target the dehumidifier will continue to run and never turn off,
regardless of the humidity level.
Once the target humidity level has been reached (- 3%rh), the dehumidifier will stop. Every 30 minutes
the fan will run and check the humidity level, the dehumidifying indicator will turn off. If the humidity level
has increased more than 3% above the target, the compressor will turn on and the dehumidifier will
start to run again – the dehumidifying indicator will be solid. If the humidity level is within 3% of the
target, the dehumidifier will go back to sleep and check the humidity level in another 30 minutes.
When the humidity level is 15%rh above the set target, the dehumidifier will be in high fan speed; when
the humidity level is 15%rh within the target, the dehumidifier will be in low fan speed.
Air Purification Mode
Hold the smart humidity button down for 2 seconds to enter air purification mode – ‘AP’ will show on the
display. In air purification mode the dehumidifier will not dehumidify, it will simply purify the air. This
mode is useful during the summer months when dehumidification is generally not required. To remove
air purification mode, hold the smart humidity button down for 2 seconds – this will take you back to
smart humidity mode.
Please note, if a HEPA filter is installed, the dehumidifier will always be purifying the air – it does not
specifically need to be in air purification mode.
Smart Laundry Mode
Smart Laundry Mode
Press the smart laundry mode button once to enter smart laundry mode. In this mode the dehumidifier
will default to a target humidity of 35%rh and high fan speed. The display will change to ‘35’ for 5
seconds and then back to the current relative humidity level. The dehumidifier will run in smart laundry
mode for 6 hours, after 6 hours the dehumidifier will turn off. Press the smart humidity button once and
the display will show ‘SL’. Press the smart laundry mode button twice to see how much time is left on
the timer. ‘06’ means 6 hours, ‘05’ means 5 hours and so on.
If the dehumidifier reaches a humidity level of 32%rh before the 6 hours is up, the compressor will turn
off to stop the air from becoming too dry, but the fan will continue to run. The dehumidifying indicator
will turn off. If the relative humidity increases to 38%rh the compressor will turn back on. It will do this
until the 6-hour timer is up.
