HUMIDITY CONTROL
60%rh
Setting the unit to reach a target humidity level of 60% means the unit will run until it reaches 60%rh
(plus or minus 3%rh). Once the target humidity has been met, the compressor will turn off but the fan
will continue to run. If the humidity level increases above 60%rh, the compressor will then come back
on and start to collect water again.
50%rh
Setting the unit to reach a target humidity level of 50% means the unit will run until it reaches 50%rh
(plus or minus 3%rh). Once the target humidity has been met, the compressor will turn off but the fan
will continue to run. If the humidity level increases above 50%rh, the compressor will then come back
on and start to collect water again.
40%rh
Setting the unit to reach a target humidity level of 40% means the unit will run until it reaches 40%rh
(plus or minus 3%rh). Once the target humidity has been met, the compressor will turn off but the fan
will continue to run. If the humidity level increases above 40%rh, the compressor will then come back
on and start to collect water again.
Continuous
Setting the unit to continuous mode means the unit will continue to dehumidify and reduce the
humidity level regardless of the humidity level in the environment. The unit will not stop unless it is
manually turned off.
Standby
Setting the unit to standby mode means the unit is powered but not running at all. The fan and
compressor will not run.