629542
19
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
26 19
AUTOMATIC SEARCH
> When in the “Main Menu, go to “Installation” by
using “ ”/“ ” and “”/” buttons and press the
OK” button. Press the “OK” button again to enter
the “Automatic Search” option. Select the “All Scan”
sub-menu.
> A satellite can be selected by highlighting “Satellite
and using the “ ”/“ ” buttons.
> If “Method” is highlighted “Fixed Sr” or
Transponder” can be selected. If you select
“Transponder” as “Method”, all relevant
transponders will be searched. If you want to search
by symbol rate, select “Fixed Sr” in “Method” and
then enter the “Symbol Rate” by using “ ”/“ ” or
number buttons.
> Select “Only TV, “Only Radio” or “All” scan type in
TV/Rad” by using “ ”/“ ” buttons.
> If you want to scan for Free-to-Air channels,
highlight “FTA/Scrambled” and select “FTA Only. If
you want to scan for both Free-to-Air and other
channels, select “All”.
> “Network Search”: A network information table is
sent by some programs and it shows the location of
other programs. If “Network Search” option is “Yes”,
the receiver tries to find the new programs according
to the network information table.
> MOVE: Press the “GREEN” button to enter
“Operation” menu in the “Channel List. Select by
using “ ”/“ ” buttons. “Move” operation is
activated. When you press the “OK” button the menu
on the right appears. The “Channel List” appears as
the left column and the channels to be moved as the
right column. Select the channel you want to move
and press the “OK” button. That channel goes to the
right column. In this menu press the “GREEN” button
to go to the list on the right. If you select a channel
and press the “OK” button again that channel goes
back to the left column, it can be removed from the
channel list to be moved. All the channels to be moved
are in the right column.
> Press the “YELLOW” button to move the selected
channels to their desired position. In the left column,
by using “”/” buttons go to the place the chan-
nels are to be moved to and press the “OK” button. All
the channels that are moved will go to the top of that
selected channel position.
> SWAP: Press the “GREEN” button to enter
“Operation” menu in the “Channel List. Select by
using “ ”/“ ” buttons, “Swap” operation is
activated. Highlight the first channel that you want
to swap and press “OK” button. Then highlight the
second channel that you want to swap, press the “OK
button again. The two channels have now replaced
each other.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxview MXL002 OMNISAT DOME bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxview MXL002 OMNISAT DOME in de taal/talen: Engels als bijlage per email.

De handleiding is 7,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info