629542
14
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
14 31
TIMERS
Timers are used to turn the unit on/off at
programmed times. Your receiver contains 8 timers.
For timer settings:
> Enter the “Main Menu” and then go to the “Timers”
sub menu.
> Select the timer that you want to change by using
”/” buttons, and then press the “OK” button.
The “Timer Details” menu is displayed.
> In the “Timer Details” menu select the channel that
you want to set using the “ ”/“ ” buttons. Enter the
date of the program in “Date. Enter the “Start time”
and “End time” by using the number buttons on the
handset. (If the start time of the program is later than
the end time it is assumed to be the next day.)
> “Mode” can be selected as “Once, “Daily” or
Weekly” by using “ ”/“ ” buttons.
•Ifyouchoose“Once”:Itturnsonthereceiveronly
on the date that you entered in “Date. “Weekday
option becomes unavailable.
•Ifyouchoose“Daily”,“Weekday”and“Date”
become unavailable. The program selected will turn
on/off at that time, every day.
•Ifyouchoose“Weekly”,“Date”becomes
unavailable but you can change the day in “Weekday.
If you entered a day in the “Date”, every week it will
turn on/off on the day that you have chosen.
> “Active” should be set to “Yes” to activate the timer.
> Save the changes by pressing the “BLUE” button.
> After completing the changes, press “MENU” or
EXIT” button to exit from the “Timers” menu.
Notes:
If the power fails for any reason, all timer settings will
be deleted and all timers turned off.
Before adjusting the timers, time and date should be
entered in “Time & Date” sub-menu.
The settings should not conflict with one another.
FIRST INSTALLATION AND TV SETTINGS
When you have completed the required connections to your satellite receiver, plug in the mains lead and switch
on (Please refer to “Connections” (page 12) to verify their correctness).
Turn on the TV and satellite receiver and press the “MENU” button on the satellite receiver remote control
handset. If you are using a scart connection to the TV, no TV settings are required. Whenever you turn on your
TV and receiver, the TV will automatically display the receiver screen. (Some TVs may not have automatic scart
switching. In this case, you need to enter the AV mode using the TV remote control handset).
CHANNEL SELECTION
You may use several methods for channel selection.
> You may select a channel by pressing “”/” buttons while any program is being displayed. The number
and name of the channel that you have selected will be displayed under the screen.
> You may select a channel, using the number buttons. The number of the channel you have selected will be
displayed under the screen. You may apply this method in three ways:
1. Press the channel number as four digits. For example, to select the channel 1875, press 1, 8, 7, 5, and to select
the channel 27, press 0, 0, 2, 7.
2. Press the channel number only and then wait a few seconds. For example, to select channel 168, press 1, 6
and 8 and wait. To select channel 56, press 5 and 6, and then wait.
3. For fast access to the channels, while entering the channel number, keep pressing the last number. For
example, to access channel 3, press and hold button 3. To access channel 14, press 1 and then press and hold
button 4.
> You may call the “Channel List” by pressing
the “OK” button, if the “Channel List” menu is
not displayed. (Please see “Channel List”).
INFOBAR
INFOBAR is displayed at the lower side of the screen with each channel change. This bar will
show channel number, channel name, signal level and some information relating to the
channel being displayed. Various symbols will show if the channel, is on the favourite list, has
alternative languages for that channel, is a radio channel, if the channel is scrambled and if teletext is available.
TELETEXT
If your TV does not have Teletext function you may use your receiver’s Teletext function.
> The teletext data is available on some channels only.
> Select the teletext channel you would like to view and press the “TXT button.
> You may use the “”/” buttons to alter the page number.
> For direct access to requested programs you may use the number buttons.
> Pressing the “TXT” button while Teletext is active makes the Teletext page transparent.
> To exit the Teletext press “MENU” button.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxview MXL002 OMNISAT DOME bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxview MXL002 OMNISAT DOME in de taal/talen: Engels als bijlage per email.

De handleiding is 7,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info