GB
Instructions for use
Only use the EasyFix on a forward-facing seat equipped with Isofix anchor points. Read the car
manufacturer’s handbook before use.
Correct attachment to the Isofix anchor points is essential for the safety of your child. Also see the yellow
outlined sticker on the side of the EasyFix. Never use a different installation method than the one
described here!
A. Preparing the Isofix
• Place the enclosed Isofix guides* (1) on both Isofix anchor points between the seat and the seat
back (2).
* Isofix guides make it easier to install using the Isofix system and prevent damage to the upholstery.
For cars with fold-down seat backs, the Isofix guides must be removed before folding down the seat.
Functional failures usually occur because the Isofix guides are dirty (dust, dirt, food particles, etc.).
This can be avoided by frequently checking the Isofix guides for dirt and cleaning them if necessary.
B. Installing with Isofix
• IMPORTANT! Secure any fold-down seats.
• IMPORTANT! Make sure the support leg is fully folded out (3,1) and that the indicator on the central
button is red (3,2).
• Press the central button on the support leg (4,1) and push the support leg backward as far as
possible (4,2).
• The Isofix connectors are now extended as far as possible (5) and the EasyFix is ready to be installed.
• Place the EasyFix on the seat of the car.
• Line up the Isofix connectors with the Isofix guides (6).
• Click both Isofix connectors into the Isofix anchor points (7).
• IMPORTANT! Make sure that both Isofix connectors are securely attached to the Isofix anchor points:
there should be two audible clicks.
• Check to make sure the EasyFix is securely installed by pulling on the EasyFix. The indicator on the
central button should now be green (8).
• Place both hands on the EasyFix and push it back as far as possible until it is situated firmly against the
seat back (you’ll hear a ‘rattling’ sound) (9).
• Check again to make sure the seat is secure by pulling on the EasyFix.
9
8
7
6
5
4
3
21
11
