Handleiding Maxi-Cosi Axiss 2012 (pagina 6 van 33) (Nederlands, Duits, Engels, Frans, Italiaans, Spaans)

472164

Verklein

Vergroot

Pagina terug

1/33

Pagina verder

4 REMOVING THE MAXI-COSI AXISS

FROM THE CAR

(Fig. 15 - 17)

1. Simultaneously open the handle (a) and rotate the seat

shell (b) towards you.

2. (a) Push the button inwards (1) whilst simultaneously

rotating the handle of the belt guide downwards. Keep the

button pushed in (1) and pull the belt (2) to unwind it from

the guide. Remove the belt from the spindle (c).

IMPORTANT: the belt can only be released if the handle is

rotated fully downwards.

3. Release the seat belt buckle (a), and remove the seat belt

from the upper belt guide (b) and the lower belt guides on

the car seat’s base.

IMPORTANT: Even when the car seat is not occupied by a

child, it should still be secured into the car according to the

instructions. Car seats that are incorrectly secured can pose

a danger to fellow passengers. In the event of collision, an

insecure car seat can pose danger to life.

5 ADJUSTING THE HEIGHT OF THE

SHOULDER BELTS

The belt system should be adjusted according to

the height of the child.

* The shoulder belts of the harness should be adjusted so that

they are level with the child’s shoulders (see diagram).

(Fig. 18 - 21)

1. Tilt the headrest forwards.

2. Adjust the headrest upwards or downwards depending

on the child’s body length.

3. When the headrest is in the desired position, press it back

to lock it into position.

6 PLACING THE CHILD INTO THE

CAR SEAT

(Fig. 22 - 25)

1. To make placing the child into the car seat easier, use the

handy belt hooks on the sides of the car seat (a). Before

placing the child into the seat, ﬁx the shoulder belts to

the hooks.

2. Place the child into the car seat, then remove the belts

from the hooks.

3. Slide the buckle sections (a) + (b) together and place

them into the buckle until you hear a clear “click” sound.

4. Pull on the adjustable belt and then pull the whole belt

system tight.

- Note:

Do not leave more than one ﬁnger’s width of

space between the child and the belt system.

- Note:

The belts should be pulled extremely tight. Slack

of just one ﬁnger’s width will make it virtually impossible

for the child to free his/her arms from underneath the

shoulder belts.

7 REMOVING THE CHILD FROM THE

CAR SEAT

(Fig. 26 - 27)

1. Push the adjuster button (a) and simultaneously pull the

shoulder belts (b) to loosen the belt system (make sure to

pull the belts and not the belt pads).

2. Push the red button on the buckle and open the belt

system. Fix the shoulder belts to the hooks.

8 ADJUSTING THE SITTING AND

SLEEPING POSITION

(Fig. 28)

Adjusting the car seat

The Maxi-Cosi Axiss can be adjusted to 6 different

positions from sitting to semi-reclining

- Push the button on the front of the seat shell and

simultaneously adjust the position of the seat backwards

or forwards to the desired sitting/reclining position.

Release the button to lock the seat shell into the desired

position.

1312

9 MAINTENANCE AND REMOVING

THE FABRIC COVER

Maintenance

Fabric cover:

• Refertothewashinglabelbeforecleaningthefabric

cover (the washing label is stitched to the cover). The

washing label displays the following information.

Washing instructions

Cleaning the cover:

• Washthecoverandbeltpadsbyhand(maximumof

30°C). Do not use a drier. Also see the care instructions

on the cover.

Tip: It is wise to buy an extra cover when purchasing the

Maxi-Cosi Axiss so that you can continue to use it even when

the cover is being washed and dried.

Plastic base and seat shell:

- CAUTION: Perform these actions only while the Maxi-

Cosi Axiss is outside of the car. Clean all plastic parts of

the base using a cloth, soap and lukewarm water. Do not

use any aggressive cleaning agents.

- CAUTION: Never use lubricants – not even for the

moving parts of the Maxi-Cosi Axiss.

(Fig. 29 - 35)

Removing the fabric cover from the seat shell:

Tip: Prior to removing the fabric cover from the seat shell, we

suggest you carefully study how it is attached so that you

can correctly re-attach it to the car seat later on.

1. Rotate the Maxi-Cosi Axiss seat.

2. Open the belt buckle by pushing the red button, open the

buckle (a), then push on the adjustable button (b) and

simultaneously pull both shoulder belts forwards (pull the

belts, NOT the belt pads).

3. Remove the shoulder belts from the belt yoke at the rear

of the car seat, then pull the shoulder belts from the shell

and the belt pads through the front of the car seat.

4. Loosen the elastic bands from the fabric cover (a). Lift

the fabric cover over parts (b) + (c) on the seat shell

(see diagram). Lift the belt components (d) through the

opening on the seat, then carefully and slowly remove

the cover.

5. Lift the elastic bands over the top of the headrest (see

diagram). Guide the belt pads through the opening of

the headrest cover, then remove the cover. Make sure to

remove the support plate from the cover before washing.

IMPORTANT: do NOT remove other parts from the car

seat, such as the EPS/polystyrene or other foam material

from underneath the fabric cover. These materials are

necessary for the safety of the Maxi-Cosi Axiss.

* When re-attaching the cover, it is very important that the

harness belts are not twisted. These should pass through

the belt buckle ﬂat (see diagram). The harness belts

should be placed underneath the cross beams on the rear

of the car seat. Before placing the child back into the car

seat, you should check that the belt system is working

correctly. If you have any doubt you should contact the

retailer of the car seat.

Only for removing the headrest cover

Release the iron rod from the rear of the car seat (b) and

remove it. The straps on the belt pads are then released.

Remove the belt pads from the car seat through the front. The

fabric cover from the headrest can now be removed.

Belt buckle functioning and cleaning:

The proper functioning of the belt buckle is very important

for the safety of the child. The most common reason for the

buckle not functioning properly is because it is dirty (from

dust, grime, food particles, etc.). Ensure that the belt buckle is

clean by removing dirt with a vacuum cleaner. The following

is a list of possible causes of function failure and possible

solutions.

A. Failure of the belt buckle:

• Whenopeningthebeltbuckle,thebucklesectionsare

released slowly.

• Thebeltbucklecanonlybeopenedwithconsiderable

force.

• Itisdifculttoclickthebucklesectionsintothebuckle

(too much resistance).

• Thebucklewillnolongerclose,thebucklesectionswill

not go together.

• Thereisno“click”soundwhenclosingthebuckle.

B. Solving any problems:

• Checkthebuckleforanydirtandifnecessaryclean

by knocking the dirt out, rinsing, blasting with air or

vacuuming.

• CAUTION: Never use lubricants!

If you are unable to close the belt buckle or if you are unsure

whether you have solved the problem correctly, contact your

retailer or importer immediately (see back of instruction

manual). Under these conditions, do not use the Maxi-Cosi

Axiss.

English

Maxi-Cosi Axiss 2012 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info