650499
8
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
PX502 Tape Library Quick Start Guide
8
3 Secure the back of the library to the rack with two
mounting clamps and two Allen screws on each clamp.
The mounting clamps are oriented differently
depending on the depth of the rack (see figure 10
).
4 Secure the mounting clamps to the rack rails with two
PHILLIPS screws on each side (see figure 10
).
Figure 10 Securing the Back of
the Library
5 To install the tape drives into the library:
a Remove the tape drive cover plates (if necessary,
some libraries ship with one tape drive installed) by
loosening the captive screws securing the plate to
the library chassis (see figure 11
).
Figure 11 Removing the Tape
Drive Cover Plates
N
OTE: If the rack depth is 27 to 30 in., the long portion
of the clamp is mounted to the back. If the rack
depth is 30 to 36 in., the long portion is mounted
to the front.
Right-hand back
bracket shown.
Allen
screws
Long
portion
Cover plate
Tape
drive
bay 1
Tape drive
bay 2
b Insert the tape drive(s) into the drive bay(s) slowly
until the connectors are seated. Refer to figure 12 for
drive bay numbering (see the
Quantum PX500 Series
Tape Drive Installation Instructions
PN 81-81301 for
information).
Figure 12 Installing the Tape
Drives
c Tighten the tape drive thumbscrews using a flat
blade screwdriver.
d Repeat these steps to install another tape drive in a
different location, if desired.
The library chassis is installed in the rack.
Cabling the Library
0
1 Connect the SCSI cables and jumpers as shown in the
following figures:
Figure 13 SCSI System Controller Board
Figure 14 Surrogate SCSI System Controller Board
Figure 15 Native Fibre Channel System Controller
Board
NOTE: Quantum ships sufficient SCSI cables and
terminators with the libraries to set up two-drives
per SCSI bus. One tape drive per SCSI bus may be
necessary for optimum performance. Refer to
your tape drive documentation.
N
OTE: SCSI cable lengths should not exceed:
39.37 feet (12 meters) between the host and
the library for single drive per bus installations.
Tape
drive 2
Tape
drive 1
Back of Library
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxdata Quantum PX502 Tape Library bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxdata Quantum PX502 Tape Library in de taal/talen: Engels als bijlage per email.

De handleiding is 1,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info