19
6.8 Powering On/Off the Phone
Plug in the battery and the AC adapter, and then press the key ON/OFF.
A LCD screen should backlight. If there is a battery installed, the battery
icon will be displayed on the LCD. If there is only the AC adapter plugged
in, only a symbol of a plug will appear on the screen.
As soon as the phone is switched on, an input text box will appear on
the screen for you to enter the PIN Code (if securities are enabled). After
the PIN Code is entered, the phone will go into Idle mode.
Any errors while entering the PIN Code might be deleted by pressing the
key BACK.
As soon as the phone is switched on, it will automatically search for a
network.
As soon as an authorized network is found, the network’s name and its
signal will appear on the screen. If there is no network found, only
emergency calls might be made, or non-communication features used.
To switch off the phone, press and hold the key ON/OFF.
6.9 Charging the Battery
It is recommended to use power through the AC Adapter while using the
phone. Built-in battery is to be used as an emergency supply in case of
power blackout.
1. Plug in the charger into the power outlet.
2. Plug in the charger wire into the jack on the top side of the phone.
As soon as the charger is correctly connected, a battery symbol will
blink on the LCD until the battery is fully charged.
As soon as the battery is discharged, the phone will automatically switch
off. Do not leave a battery discharged for a long time, doing so might
negatively impact its quality and battery life. To make sure the phone
works properly, use only a charger recommended by the Manufacturer.
6.10 Security Codes
6.10.1 PIN Code
It is a Personal Identification Code of the SIM Card provided by the
service provider. PIN2 Code is provided by the service provider along
with SIM cards. Some SIM cards do not support such a code.
