545558
18
Verklein
Vergroot
Pagina terug
1/133
Pagina verder
SFX SERIES USER’S GUIDE
Rev 2.2 16
After processing an input line (or after return is pressed on a blank line), the interface will display the “IDC>”’ prompt on
the terminal. You can type GetCommands at this prompt to obtain a list of available commands. Use upper and
lower case for the command as shown.
The terminal interface will remain active until an exit command is issued to logout, or the timeout period of five minutes
has been reached.
A separate International Datacasting Application Note is provided with details on the specific commands for the
Terminal Interface. Please proceed to Chapter 3 for more information on obtaining application notes.
Controlling the Receiver with the Web GUI
All accessible functions within the satellite receiver can be controlled using the Web Graphical User Interface (GUI).
The receiver acts as a web server in this case, serving out GUI pages to a PC with a browser. Communications
between the browser PC and the receiver is via a LAN connection to one of the Ethernet ports on the rear panel,
generally using the https protocol (SSL is used and the secure link is always enabled).
The Web GUI is compatible with the following web browsers:
1. Internet Explorer V5.0 or later, running under Windows® ‘95, ’98, 2000 or Windows NT or XP OS.
2. Mozilla V0.98 or later, running under Linux OS.
3. Firefox V1.5 or greater under Windows/Linux/MAC OS.
The Web GUI is best used with browsers that are displayed at a resolution of 1024 x 768 or greater, although 800 x
600 resolution is sufficient. However, at 800 x 600 resolution you may need to use the scroll bars more often.
Typically, an Ethernet crossover cable is used in the field when the receiver is being aligned to the satellite signal and a
point-to-point connection is required between the receiver and the browser PC. To communicate between the satellite
receiver and the browser PC, it is necessary that the IP address of the customer’s computer be set to the same subnet
as the receiver. The factory default IP address of the eth0 interface is 192.168.0.1 and the eth1 interface is
192.168.1.1. Typically, you will have to use the SetIP command in the Terminal Interface, or use the LCD control
panel to set the IP address to another value. If you do not know the IP address of the receiver, you can discover it by
using the GetIP command in the Terminal Interface, or you can view it through LCD control panel.
When the browser PC and the receiver are connected together via a hub or switch in a LAN configuration (typically
using Ethernet “straight through” cables), the same rule as above, applies.
If the browser PC and the receiver are on different LANs connected by the Internet, communications between the two
can only be made if the receiver IP address is known. Typically, the satellite receiver would be set up on its LAN with a
gateway to the Internet.
Once the receiver is set up with an IP address that is known, you can access the receiver by typing the IP address in
the Address line of the browser. The Web browser will default to port 443 (SSL), so only the IP address is required in
the Address line. If there is no demo content in the receiver (e.g. customized web page accessed in the clear via port
80), then this port will be forwarded through port 2100 (secure access). If your connection is successful, you will be
required to login to the receiver, as shown in the example Internet Explorer login page in Figure 1- 4 below.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Max SFX Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Max SFX Series in de taal/talen: Engels als bijlage per email.

De handleiding is 4,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info