472809
12
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
12
ENGLISH
3. FITTING/REMOVING THE COMPUTER
3.1 Slide the computer onto the mount from the front until it
locks into place with an audible click.
3.2 To remove the computer, press the button underneath the
mount and slide
the computer out
towards the front of
the bike.
4. INSTALLING THE SENSOR NUT
4. Installing the Sensor nut
The speed sensor in this computer is integrated into a fixing
nut compatible with all quick-
releases on the market.
To install it, unscrew the fixing
nut on your quick-release.
Insert the quick release from the
left-hand side of your bike and
tighten the electronic fixing nut
from the right-hand side.
Adjust the tightness of the nut
so that the quick-release locking
lever can be sufficiently firmly
pushed into the CLOSE position
(if in doubt, consult your retailer
or the hub manual).
4.1 Road bike.
Once sufficiently tightened,
position the sensor towards the
rear before closing the quick-
release hub.
4.2 Mountain bike.
Once sufficiently tightened,
position the sensor towards the
top before closing the quick-
release hub.
6. INSTALLING THE BATTERIES
Power supply for the computer: 1 CR2032 battery.
Power supply for the speed sensor: 1 CR2032 battery.
Only use this type of battery.
Installing the batteries:
6.1 Remove the battery cover by turning
it a quarter turn anticlockwise, using
a coin.
6.2 Insert the battery into its recess,
keeping the + side uppermost.
6.3 Refit the battery cover and close it by turning
it a quarter turn clockwise.
Do not to use excessive force, or you will
damage the unit.
Check the condition of the seal on the battery
cover each time you change the battery. Replace
the battery cover if the seal is damaged.
Always perform the above operations in a dry
place.
1
2
5.3
6.2
6.1
4
5.1
4.1
5.2
5. INSTALLING THE MAGNET
5.1 Position the magnet on a spoke so that it passes opposite
either of the lever marks and at a maximum distance of
5 mm.
When used on a mountain bike, it might be necessary to use
the adjustment magnets to reduce the distance between the
sensor and the magnet. (5.2).
The magnet must be facing outward from the wheel.
5.3 Must be cut for use on profiled Zicral spokes
4.2
3.1 3.2
8. FUNCTION
8.1 To scroll dis
Screen 1:
• Spot speed
• Number of bi
k
• Pedaling cade
• Trip distance
Changing the c
effect of zeroing
total distance, m
(M or KM), whe
After installatio
batteries
(in sensors or
imperative to
r
described in se
Battery life: 12
7. DESCRIPT
wintech-esbolt bis.indb 12wintech-esbolt bis.indb 12 20/03/07 12:34:1720/03/07 12:34:17
Cyan quadriMagenta quadriJaune quadriNoir quadri
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mavic Wintech E-BOLT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mavic Wintech E-BOLT in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 7,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info