7
selected. If there is a fault on the dishwasher, the fault code will show on
these lights.
“Salt” and “Rinse Aid” warning lights and “End of Programme” light (4)
When either the dishwasher salt or rinse aid begins to run out, a warning
light will illuminate to advise that it needs refilling.
When the programme is complete, the dishwasher will emit five beeps
and the “End of Programme” light will illuminate.
Starting a programme
• Press the “Power” button (the “End of Programme” light will be switched
on).
• Press the “Programme Selection” button until the required programme is
shown on the indicator lights.
• Once a programme is selected, the “End of Programme” light will switch
off.
• When you close the dishwasher door, the programme will start
automatically.
Please note: The dishwasher stores the most recently used
programme in its memory. To change the programme, simply press
the “Programme Selection” button.
At the end of a programme
If possible, do not open the dishwasher door once the programme has
started. At the end of a programme, the dishwasher will beep five times,
and the “End of Programme” indicator light will switch on.
